Reviews
Good texture
I bought it because I liked the texture and design.
The moving part is fixed by Bolt, so it could be loosened by vibration, and it was necessary to carry a tool at all times. In windy conditions, the Motorcycle Cover could push it loose.
I don't put much force on the Arm Up, so the Right Arm was hard to Gap. I also used the seat Gold, but it did not improve much. I don't think it was loose due to weak tightening.
Visibility would depend on the compatibility of the Motorcycle, but I could not see directly behind me on the FAZER.
It is a Cool product and should be used well together.
View detail
Almost satisfied
Purchased mainly for day-touring.
It is also highly rated because it looks Refreshing and has a Single seat cowl-like appearance.
As for the capacity, I would like to put in a Wallet/Plastic bottle. (500ml) I am satisfied because the Fanny pack (which holds the Wallet) just fit.
I don't ride in the rain, and if I want to put rain gear in the bag, I use a Seat bag one size larger, so no problem.
One point of concern is the handle. The cover of the handle is a bit thick and heavy, so it sticks out from the Rear Sets in my vehicle.
I have to take the cover off to avoid this problem.
View detail
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
add-25r Use BlackMotorcycle Cover 3L
[How is it used?
Motorcycle Cover in Garage
Was the one you received as per Image?
As per Image
How was your experience with it?
It is easy to apply.
[Points to note]
Be careful with Exhaust System after driving or when it is hot.
How did it compare to other products?
The delivery time is fast and the price is good.
Other items that would be helpful
Installation Point or hang
This size is just right with SeatBack mounted with zx-25r up on Motorcycle stand in front and back.
View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: KAWASAKI Z 650, KAWASAKI Ninja 650, HONDA CBR650 R, HONDA CBR650 F, HONDA CBR500 R, HONDA CB650 R, HONDA CB650 F, HONDA CB500 F
ArrowBaffle
The volume is not too large, not too small, and the sound is thick. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
Blue empty parking.
Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty.
View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Made by YOSHIMURA for peace of mind
Used for YAMAHA XSR155
It is a product of YOSHIMURA, so the manufacturing is top notch.
It will be fun to ride Motorcycle again.
View detail
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Ideal Size for a little touring
It doesn't hold as much as it looks.
Please be aware of this.
It is good for day-touring, but only small items are available as souvenirs.
Design is good.
Match to Motorcycle.
View detail
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
DAYTONAChain beware!
Chain hole is too small to fit Daytona's Chain. View detail