Reviews
Made in Japan
There is no wobble, it is a Snap and can be held without any worries.
All the cars had Chinese ones on them, but the difference was remarkable in comparison.
View detail
ODO 10,000km mounted on HondaSUPER CUB
Ignition coil, Cable, and Plug cap are Quantity:We propose a product lineup that is a set (you can choose). (BUSINESS patent registered w) View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Fits: HONDA PCXe: HEV, HONDA PCX, HONDA PCX150ABS, HONDA PCX160, HONDA PCX HYBRID, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA ADV150
Cospar good
I think it is more cost-effective to put on Red Pad than to put on Normal. View detail
![Brake Pad - ROAD [CC] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0320/25640991_20221222132246602_TS.jpg)
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the front of CRF250.
View detail
If you have small hands, this is Recommendation.
CROSS CUB (JA60) I bought it for.
I have small hands, so I was having trouble reaching only a few fingers with the OEM Lever, and this was recommended to me.
I did the installation myself and it was not that difficult.
I really like the fact that I can adjust the position of Lever after using it!
It is easier to grip and much more secure.
Also, I wasn't expecting much. Foldable." I was also impressed… when I experienced it the other day in an unexpected standstill. I am glad I replaced it.
I love the calm color of Gun meta and the colorful Red adjust lever.
View detail
Fits: Others , YAMAHA NMAX125, KAWASAKI Z125PRO, KAWASAKI Ninja250R, KAWASAKI D Tracker 125, KAWASAKI KSR PRO, KAWASAKI KSR110, HONDA PCX160, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA MSX125, HONDA MSX125SF, HONDA GROM, HONDA XR100Motard, HONDA ADV150, HONDA Ape100 Type-D, HONDA CB125R, HONDA FORZA, HONDA CROSSCUB110
Dress-up but the color is not good…. (>_<)
I installed it almost exclusively for visual appeal.
The installation itself is easy even for beginners.
CylinderGuard→Billet lever, and because I installed them in that order, the color of Red was slightly different, and I was a little disappointed.
But Cover makes me happy because I can always see it when I'm driving.
View detail
Good item for monkey 125
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Good item for monkey 125!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Winter Essentials
I had survived the winter with only the ZETA hand warmer, but as I got older, the coldness in my hands started to get to me, so I bought it. View detail
How can I use this...
The bar was installed in front of the handlebar, and I honestly wondered what I should put on this part.... I installed the Smartphone Holder in the opposite direction, and the position of the Smartphone Holder looked good, but this time, it was attached to the bar so that the area around the Meter could not be seen by the bar, I was agonizing over how to make the best use of it, but I decided to just put it on for the time being. View detail
What's with the mysterious OEM ring guy? For those who wonder...
The mysterious OEM parts were too mysterious for me, and I thought they could have been a little better. I was wondering if there was anything I could do to improve the performance of the car, and I found a steel plate that came with the Exhaust SystemDesign, so I bought it, It is only for dress-up. View detail
For those who want a more adventurous feel...
I was thinking that the OEM screen was not long enough in terms of appearance, but I found a screen with a good length, so I bought it.
ADV can be transformed into two patterns, one with the screen lying down and the other with the screen standing up.
The standing Style is slightly easier in the high speed range if you get down a little (slightly).
I like it a lot because it is not too small, not too large, and has a different look and feel compared to OEM.
View detail
For those who want to protect the plastic part of the helmet in...
I don't know if it's a fad or a cost-cutting measure, but the ADV is not equipped with this kind of InnerPad, and I was very curious about it.
I thought the price was a little high, but I decided that it was a special part and I had no choice but to purchase it.
In the initial stage, the puka-puka does not seem to Fit slightly, but as it is used, it seems to fit in gradually, but it does not Fit completely.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Too easy to put on and take off.
If you squeeze the bottom first. The rest was easy to put on and take off with a zip!
It's really easy:??
I am also happy that I can hang it right away without any problems!
View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
It is a Pad that works softly and is easy to plunge into.
It is an easy-to-handle Pad.
The decrease is surprisingly fast.
View detail
Size did not fit….
I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.
I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.
One of my colleagues at work is a motorcycle rider, so I gave it to him for free.
I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time.
View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Fits: HONDA PCXe: HEV, HONDA PCX, HONDA PCX150ABS, HONDA PCX160, HONDA PCX HYBRID, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA ADV150
They just say it's a cheap pie.
I was concerned about the looseness of the Brake on my light motorcycle and replaced it.
I was not sure about Golden, but chose Red Pad for now.
Braking power was increased over OEM and the time it takes for Brake to kick in was reduced.
Well, it is a hassle to get BALI.
I can feel the difference immediately after the replacement, and I am grateful to DAYTONA for offering it at this price.
View detail
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail