Reviews
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: YAMAHA RZ250R, YAMAHA RZ250RR, YAMAHA RZ250, YAMAHA RZ350
YSS yh Rear Suspension
When installing, the lower seal is too tight to insert the shaft.
The lower Seal was not installed in this replacement project.
The grease needs to be replaced periodically, although there is no problem in operation.
View detail
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
watchman
For Stock.
It is a standard product and safe.
View detail
Fits: APRILIA SX50, HONDA NSR80R, KAWASAKI KZ1000 Police, KAWASAKI LeoStar, PEUGEOT Speed Fight 2 WRC, ROYAL ENFIELD Britt 500, ROYAL ENFIELD BritClassic, ROYAL ENFIELD BritClassic Deluxe 535, ROYAL ENFIELD Lightning Custom 535, YAMAHA 125R, APRILIA SR125, APRILIA SR150, APRILIA Mojito Custom 50, BETA EVO 80 JUNIOR, BETA EVO 80 SENIOR, BETA rr 2t 250 enduro, HONDA CRM250, HONDA CRM250R, HONDA CRM50, HONDA CRM80
Plug replacement
Regular Plug replacement for CRM. It is a little bit covered. View detail
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Have you become snappier?
[How is it used?
I bought it because I use Enduro as my main and use Clutch a lot for logs and gullies.
Was the one you received as per Image?
It is exactly as shown in the Image. I even feel that it is packed more Compact than I expected.
Was the installation difficult?
Simply replace the existing clutch spring that is holding it in place, and if you work with the motorcycle on its side, you don't even need to pull the oil out. You just need to make sure that the spring is properly seated in the Retainer groove.
How was your experience with it?
Since the last time I rode the Washer, there was a little bit of free time, so I could not say that there was a drastic change! I used only one washer, so I may add another washer to change the characteristics a little more.
[Included Parts:were they on?
The bolt has a countersunk hole to reduce friction and a hexagonal head. The torque is 10Nm, but if you do not have a hexagonal tool, you will have to tighten the bolt by feel.
[Was there anything that disappointed you?
No, it is not. This time the test was at low speeds, so I am looking forward to seeing what happens at high speeds.
View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
Fits: YAMAHA RZ250, YAMAHA RZ350
Exchange from OEM
I am satisfied with the cleanliness!
I like the replacement from OEM and the various Parts that are available!
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
It looks better now.
I put it on because it stands out from the OEM. View detail