Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Fits: YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L), YAMAHA JOG (CY50M), YAMAHA RAZZ (SH50A), YAMAHA RAZZ (SH50B), YAMAHA RAZZ (SH50D), YAMAHA RAZZ (SH50E), YAMAHA RAZZ (SH50F), YAMAHA RAZZ (SH50G), YAMAHA RAZZ (SH50H), YAMAHA RAZZ (SH50J), YAMAHA RAZZ (SH50K), YAMAHA RAZZ (SH50L), YAMAHA RAZZ (SH50M)
TZr50R 4EUEngine Oil pump Breather BoltGasket
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is Oil pump's Breather BoltGasket.
If this Gasket is damaged, 2ndOil may ooze out of the Oil pump.
Although there was no leakage during the O/H this time, it was replaced as a preventive measure.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
When bleeding air from 2ndOil, loosen this bolt to bleed air.
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
Not particularly
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: YAMAHA jog, YAMAHA MINT, YAMAHA CHAMP, SUZUKI CHOINORI, YAMAHA YSR50, HONDA PAL, HONDA MONKEY, KAWASAKI KS-1, SUZUKI GAG, HONDA CHALY, HONDA GORILLA
Perfect Size
[How is it used?
Purchased to replace the Cover I was using on my 4LMONKEY.
At first, I was looking for something inexpensive, since I only needed to be able to Cover.
Was the one you received as per Image?
It is just like the Image and is a normal Motorcycle Cover.
How was your experience with it?
The size was firmly covered as shown in the compatibility chart.
I am satisfied because both Front and Rear are well covered and almost invisible.
I don't know how durable it will be, as it has only been about a month. I'll keep my expectations high.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L), YAMAHA JOG (CY50M), YAMAHA JOG (CY50N), YAMAHA RAZZ (SH50A), YAMAHA RAZZ (SH50B), YAMAHA RAZZ (SH50D), YAMAHA RAZZ (SH50E), YAMAHA RAZZ (SH50F), YAMAHA RAZZ (SH50G), YAMAHA RAZZ (SH50H), YAMAHA RAZZ (SH50J)
Genuine Yamaha Piston Rings for PW50 2013
As the original part that failed on this rebuild was the piston rings, the new set was needed. We just went for the standar set for the PW50 as this is the usual way forward. I found the right part using the tools Webike provide and cross referencing with Yamaha schematics. Although the price was fairly high, it was far less than sourcing locally. I had a few parts for this rebuild to ship so got them all together. I used EMS and all arrived in perfect condition in 5 days from shipping. The piston ring set cam ein the usual Yamaha packet but also Webike put this inside a bubble wrap envelope with the other small parts to keep them safe from damage in transit. The piston rings arrived in perfect order, there is no corrosion or flaws in any way. They are pretty flexible but not enoguh to worry me. Now lets get on with the rebuild and get this bike back on the road. Excellent work Webike, will be back soon. View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L)
Genuine Yamaha Ball Race 1 for Vino Classic 2004
This little scooter came into the shop with some major steering issues. Due to the age of the bike I decided to do a full fork strip down including the head, bearings, races etc. When I got really inside and saw exactly what the problem was. Basically all the races were shot, the bearing was pretty nasty and some of the fittings had been totalled beyond any reasonable repair. I decided the best course of action was to simply replace all the parts that were either not great or done for. Finding the correct parts for this job was not super hard as I just used the help pages and links Webike provide. Then I cross referenced with Yamaha schematic for the bike model to make sure. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. All the parts came in the standar Yamaha packets and were really well packaged. The race has a good finish in silver and the race has been well moulded. I doubt these are cnc'd anyway. The fit is perfect, the bearings were well greased so this race went into place easily. Now to add the other parts to finish off this build. Great job Webike, very happy customer View detail
Fits: YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L), YAMAHA JOG (CY50M), YAMAHA JOG (CY50N), YAMAHA PW50 (PW50B1), YAMAHA PW50 (PW50D1), YAMAHA PW50 (PW50E1), YAMAHA PW50 (PW50F1), YAMAHA PW50 (PW50G2), YAMAHA PW50 (PW50H2), YAMAHA PW50 (PW50J2), YAMAHA PW50 (PW50K2)
Genuine Yamaha Ball Race 3 for Vino Classic 2004
This was the third part of the massive total front for rebuild on the Vino Classic 2004 I had come into the shop for help. This time it was for the Ball Race 3. I found the correct part by using the tools Webike have on their help pages and then cross referencing with Yamaha schematics for my own peace of mind. Webikes price for these parts was excellent and better than I could source locally. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. As with the other parts for this rebuild, the race came in the Yamaha packet and was well padded out inside the box for safety. This race has a lonmger neck but this means there could be more issues which is what happened on the original part. This part however is super clean, well made and the finish is superb. No issues at all, very happy with my purchase, thanks Webike. View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail