Reviews
C7HSA
We are bringing my friend's SUPER CUB CUSTOM back to normal. We replace consumables, including the glow plug. We take only time-tested spare parts. In terms of quality, everything is on top, without complaints. The engine started working like a Swiss Watch. View detail
Quantity with high grip tire because it works well.:Set Exchange is a Recommendation
It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.
The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)
I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Purchase Repeat
I bought Repeat because I used it before on my LITTLE CUB and it worked well. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Fits: HONDA CRF100F, HONDA XR100R (for competition), HONDA Ape 100, HONDA NSF100, HONDA XE75, HONDA XL80, HONDA XLR80, HONDA XR100MOTARD, HONDA XR80, HONDA KITACO SPLCylinder head
Great xr100 valves!
High quality performance valves! Definitely a nice upgrade over oem. Install was smooth and feel they will last a long time! View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
![Main Jet [KEIHIN Round Shape/Large]](https://img.webike-cdn.net/catalogue/13652/450-3030750_TS.jpg)
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
Made by DAYTONA
[How is it used?
Used to replace front and rear Drum Brake Shoe,
Because the previous Shoe replacement time was unknown and it was not working well.
How was your experience with it?
When Brake was applied with the same sensation as before the replacement, the Rear brake worked so well that it locked up!
How did it compare to other products?
It may not be as effective as a disc brake, but it is as good as a disc brake, and I am very satisfied with the large size.
[Points to note]
Nothing in particular, but beveling of the shoe, cleaning of the drum brake, and grease up are also required prior to installation.
Brake wires, clutch wires, and other parts were also replaced, both front and rear, but it was not a difficult job, as it was started in the morning and finished before noon.
(I'm giving it 4 stars because I'm not sure how durable it will be.)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Performance is top notch!
The Engine is good and spurts out perfectly.
But 3 times more than the price of Normal plug!
Cost performance is the lowest!
The average score between the two would be about 3 points!
View detail
Fits: HONDA CHALY 70, HONDA XL80, HONDA CHALY 50, HONDA XL50, HONDA CB50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA XR80, HONDA MOTRA, HONDA MONKEY R, HONDA MONKEY RT, HONDA JAZZ, HONDA DAX, HONDA DAX70, HONDA Nauty Dax, HONDA GIORCUB, HONDA APE 100, HONDA APE 50, HONDA MAGNA50
I appreciate the Lineup of each tooth number of Sprocket with old car gaiters.
The 50CCE engine was replaced by the 100CCE engine, and the Sprocket was installed to increase the speed. This type of KITACO's Sprocket has a lineup of teeth and is very useful even though it is for an old vehicle. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: GASGAS TX RANDONNE, HONDA 125T MASTER CUSTOM, HONDA 250T MASTER/LA CUSTOM, HONDA APE/DX(FI), HONDA APE/SPECIAL/DX, HONDA APE100/DX, HONDA ATC70(TRIKE), HONDA BENLY (CD50), HONDA BENLY (CD50S/SP), HONDA BENLY (CL50), HONDA BENLY CD125T, HONDA BENLY CD125T, HONDA BENLY CD90S, HONDA BENLY CD90, HONDA BENLY CD90, HONDA BENLY(CD70K), HONDA CB125T, HONDA CB50S, HONDA CD250u, HONDA CHALY(CF50)
This alone did not cure the stall.
At first this cured the stall, but it was not the only thing that cured the stall... I put 10% of SurLuster UltraCleaning's purple stuff in the hard for race oil (about 1800 yen), filled it up to half Gauge, and cleaned the air cleaner as well, I have no idea what effect IUF22 has on me now. I am not sure about the effect of IUF22 at this moment, but I guess I will understand it as I upgrade my car from now on. View detail
Fits: HONDA BENLY50CD90 , HONDA BENLY50CD90 , HONDA BENLY50CD50 , HONDA BENLY50CD50 , HONDA BENLY50CD50 , HONDA CT110 HUNTER CUBCT90, HONDA CT110 HUNTER CUBCT110, HONDA SUPER CUB 90Custom , HONDA SUPER CUB 90, HONDA SUPER CUB70Custom , HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50 "Weather Child" Ver., HONDA SUPER CUB 50 STREET, HONDA SUPER CUB 50 60th Anniversary, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
KIJIMA Spoke Wrap
I think it's a good idea because it's cheap and easy to change the look of the product. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail