Reviews
Fits: HONDA Monkey BAJA, HONDA Rebel300, YAMAHA Bolt CSpecifications, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), SUZUKI BOULEVARD400, SUZUKI DESPELADO800(MARAUDER800/VZ800), SUZUKI DESPELADO800(MARAUDER800/VZ800), SUZUKI DESPELADO400, SUZUKI DESPELADO400, SUZUKI DESPELADO400, SUZUKI Intruder Classic400, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, HONDA MAGNA750
The pure peg was a product made of a rubber, and since it was wretched, they were exchanged. It is considerably pleasing although it is a little dress-up up. pure, when it is operated with thin shoes -- although it is more slightly painful, if it
The pure peg was a product made of a rubber, and since it was wretched, they were exchanged.
It is considerably pleasing although it is a little dress-up up.
pure, when it is operated with thin shoes -- although it is more slightly painful, if it gets used, it is seldom worrisome.
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
It attached to D-Tracker. Since an authentic positive one is too wretched, it is dramatic. It became the touch made into the snap!
It attached to D-Tracker.
Since an authentic positive one is too wretched, it is dramatic.
It became the touch made into the snap!
View detail
Fits: SUZUKI Gladius 400, SUZUKI Impulse 400, TRIUMPH SPEED TRIPLE, YAMAHA SR400, YAMAHA SR500, YAMAHA FZ1, HONDA CB500X, HONDA CB500F, HONDA Hornet 600, HONDA CB750, HONDA CB400SS, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R, BMW R1200R, BMW F800R, DUCATI monster, KAWASAKI ZRX II, KAWASAKI Z750, KAWASAKI Z1000
Although purchased to XTZ125, it is safer at least for this to have a margin in a size.
Although purchased to XTZ125, it is safer at least for this to have a margin in a size. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX400F Integra, HONDA CBX125, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR750, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750
CB400SF Revo is equipped. Since the surface had been somber although it was silver, an authentic positive one exchanged the brake & clutch lever. Exchange was completed simply. It is satisfied with the simple design and the competitive price.
CB400SF Revo is equipped.
Since the surface had been somber although it was silver, an authentic positive one exchanged the brake & clutch lever.
Exchange was completed simply.
It is satisfied with the simple design and the competitive price.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX400F Integra, HONDA CBX125, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR750, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750
It purchased by the object for CB750F. Otherwise the object for F was not found but became this. The angle sticks from normal and I think that lighter operation is possible. A using feeling is comfortable, and if it can obtain at such a cheap
It purchased by the object for CB750F.
Otherwise the object for F was not found but became this.
The angle sticks from normal and I think that lighter operation is possible.
A using feeling is comfortable, and if it can obtain at such a cheap price, it is preeminent for cost performance.
Is the choice of normal lost?
View detail
Fits: SUZUKI Gladius 400, SUZUKI Impulse 400, TRIUMPH SPEED TRIPLE, YAMAHA SR400, YAMAHA SR500, YAMAHA FZ1, HONDA CB500X, HONDA CB500F, HONDA Hornet 600, HONDA CB750, HONDA CB400SS, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R, BMW R1200R, BMW F800R, DUCATI monster, KAWASAKI ZRX II, KAWASAKI Z750, KAWASAKI Z1000
Although the cover which was being used before will be mischievous and will be torn, and used, having repaired for a while, a new thing is purchased on replacing a motorcycle. It is because the conclusive factor of purchase is used for a price and oth
Although the cover which was being used before will be mischievous and will be torn, and used, having repaired for a while, a new thing is purchased on replacing a motorcycle.
It is because the conclusive factor of purchase is used for a price and other motorcycles, so the situation is known.
Using, convenient points are the point of understanding at a glance when hanging a cover since the blue portion is a front, and a point which does not fluster since the bottom can extract with a string.
Conversely, slightly anxious one has cloth thinner than a pre- cover.
I think that it is thinner than a former yamaha cover.
Although considering a cutting-down-cost kana ? price it may be unavoidable, a demerit mark was once given to even *.
View detail
Fits: HONDA Monkey BAJA, HONDA MAGNA750, HONDA MAGNA750, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA solo, HONDA STEED600, HONDA STEED400, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA JAZZ, HONDA SHADOW400, HONDA SHADOW750, HONDA APE 50, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE TypeD
It removed and equipped with the rubber with a black pure shift pedal of the virago 250. texture -- rather -- good -- I consider. The foot peg was changed according to the time of changing from an authentic positive one, and atmosphere changed con
It removed and equipped with the rubber with a black pure shift pedal of the virago 250.
texture -- rather -- good -- I consider.
The foot peg was changed according to the time of changing from an authentic positive one, and atmosphere changed considerably by brightness of a chrome.
About the operation feeling, it was good to seldom have felt sense of incongruity as the time of pure, but do custom easily.
View detail
Fits: HONDA MAGNA750, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW PHANTOM750, YAMAHA Bolt
The same type as the grip of a handle was used. A heavy atmosphere changes to a plating tone with the rubber of normal, and, moreover, it becomes the circumference of a handle, and is very good touch. Attachment was also easy.
The same type as the grip of a handle was used.
A heavy atmosphere changes to a plating tone with the rubber of normal, and, moreover, it becomes the circumference of a handle, and is very good touch.
Attachment was also easy.
View detail
Fits: YAMAHA TW200, YAMAHA TW200E, YAMAHA TW225E, HONDA Rebel300, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA VIRAGO250(XV250), YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI BOULEVARD400, SUZUKI Intruder Classic400, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN900Custom, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800
It attached to the eliminator 125. There are no sissy bar holder and plate in which it suits for wearing in an eliminator, and there is not that I only get my original work and a contractor to make the plate for wearing from custom-made. Moreover,
It attached to the eliminator 125.
There are no sissy bar holder and plate in which it suits for wearing in an eliminator, and there is not that I only get my original work and a contractor to make the plate for wearing from custom-made.
Moreover, since a plate is attached to a frame, you also have to process a little plating cover.
However, it attaches, or I become and think that he is smart.
It was tight into low & Long's car body.
Although there is also a pure sissy bar in an eliminator, a pure sissy bar has fairly many people who attach.
other persons are differed from when a round sissy bar is attached -- It is custom alike. doesn't it become?
I think that the width of KASUTAMU also spreads.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX400F Integra, HONDA CBX125, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR750, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750
Clutch levers were also exchanged together with the brake lever. Although it wavered with the lever of silver, the touch and the ease of grasping in which it was good for, appearance changed to, and the circumference of a handle became tight have also
Clutch levers were also exchanged together with the brake lever.
Although it wavered with the lever of silver, the touch and the ease of grasping in which it was good for, appearance changed to, and the circumference of a handle became tight have also said black paint application to mind.
View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
Tokoro who was looking for that which is surely said short after changing a handle -- just right one was found and it attached instantly. Exchange could also be simplified and was very good goods.
Tokoro who was looking for that which is surely said short after changing a handle -- just right one was found and it attached instantly.
Exchange could also be simplified and was very good goods.
View detail
Fits: SUZUKI Gladius 400, SUZUKI Impulse 400, TRIUMPH SPEED TRIPLE, YAMAHA SR400, YAMAHA SR500, YAMAHA FZ1, HONDA CB500X, HONDA CB500F, HONDA Hornet 600, HONDA CB750, HONDA CB400SS, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R, BMW R1200R, BMW F800R, DUCATI monster, KAWASAKI ZRX II, KAWASAKI Z750, KAWASAKI Z1000
One-year and half use of the zephyrs 750 and 2L. A photograph is two-piece Sakka's thing. In the case of good point (1) wearing, since the front is blue, it understands at a glance. (2) Since the skirt is not a rubber in the case of wearing, n
One-year and half use of the zephyrs 750 and 2L.
A photograph is two-piece Sakka's thing.
In the case of good point (1) wearing, since the front is blue, it understands at a glance.
(2) Since the skirt is not a rubber in the case of wearing, neither a handle nor a mirror is caught easily.
(3) Since the skirt is longer in the case of wearing, if it narrows down in cord, dust etc. cannot enter easily.
(4) If a mirror part is raised upwards after loosening a cord in the case of desorption, it can remove comparatively comfortably.
(5) a yamaha -- though it is pure, since it is used in the place with the point (1) roof where a comparatively cheap place is bad, it is satisfactory, but waterproofness is anxious when nothing is just going to be.
(2) The number plate and the center stand part were caught, and since cloth is thin, it has been torn by one year and half.
The next is also decided to be this.
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
This is good!! Structure is good considering a price!, of course, a brake touch becomes a different thing and is very satisfactory!
This is good!! Structure is good considering a price!, of course, a brake touch becomes a different thing and is very satisfactory! View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Since it is general-purpose, I think that any vehicle types suit. Since it was a normal caliper, an 11-mm thing was attached. I think that it changes into 14 mm since 4 pod caliper is attached and changed at the future. Since this series is us
Since it is general-purpose, I think that any vehicle types suit.
Since it was a normal caliper, an 11-mm thing was attached.
I think that it changes into 14 mm since 4 pod caliper is attached and changed at the future.
Since this series is user-friendly, it is found useful very much.
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
VTR250 was equipped. It became the exchange in which the portion which attaches the mirror of a pure master cylinder breaks. Especially since effectiveness of a touch or a brake has not changed phi of a cylinder, it has no change. Since the fi
VTR250 was equipped.
It became the exchange in which the portion which attaches the mirror of a pure master cylinder breaks.
Especially since effectiveness of a touch or a brake has not changed phi of a cylinder, it has no change.
Since the fixing position of the mirror turned up a little, it is touch that how whose right and left are visible is different, a few.
or [ which is called an after problem ] -- although it will think how it is to make [ which bites exhaust air and meets ] a tank small since it comes out and fearful phi is small if a reserve tank is small and inclines -- well -- three stars -- right -- disagreeable.
View detail
Fits: HONDA STEED400, HONDA STEED400 VSE, YAMAHA DRAGSTAR250, SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI Intruder Classic400, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, KAWASAKI ELIMINATOR 250V, HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA STEED600, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA SHADOW400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic
It purchased and has equipped in December last year. It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down
It purchased and has equipped in December last year.
It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down went out.
In order to check, when Wright was opened, a coupler and wiring burned and melted and it was in the charred state.
the manufacturer was asked and insides were exchanged -- it was given.
However, it will enter in September and will be in the same condition.
The coupler was in such a severe state by the half this time that it melts and collapses.
Wright's design itself -- it will be useless.
Wright had better not choose only by a design.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Pure iron rusted easily because of [ of the brake fluid ] hygroscopic property, and since it made rust with a stage in the taper part moreover, it was exchanged. Although the rust of the aluminum by electric potential difference with a caliper part is
Pure iron rusted easily because of [ of the brake fluid ] hygroscopic property, and since it made rust with a stage in the taper part moreover, it was exchanged.
Although the rust of the aluminum by electric potential difference with a caliper part is worrisome, a pure twist thinks that it is easy to treat through grease.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX400F Integra, HONDA CBX125, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR750, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750
It decided to exchange fronts, since the surface was somber white although the lever of pure silver was attached. Thanks to the comment~L shape after ~ attachment, a lever becomes near and came to go out a clutch more comfortably than before. As f
It decided to exchange fronts, since the surface was somber white although the lever of pure silver was attached.
Thanks to the comment~L shape after ~ attachment, a lever becomes near and came to go out a clutch more comfortably than before.
As for an effect, since it is a clutch lever [ NIGINIGI / clutch lever / frequently ], it is also large that the form of a lever changes a little.
A feeling of fatigue of the left hand after riding on a motorcycle for a long time decreased considerably.
The black lever in design tightens the circumference of a handle, and is sporty touch.
Since [ with the black paint application appropriate for Yasu for a while ], it is * minus.
They are things as it is reasonably priced.
Since the black lever with last thing changes the impression of the circumference of a handle, the ease of grasping is also a recommend.
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Cling to the hornet 250. notes entry in the case of attachment -- it carries out. I am pleased, if someone sees this and can give a help of purchase. First of all, a mirror fixing position receives pure and moves to the center side 4 or 5 cm 4
Cling to the hornet 250.
notes entry in the case of attachment -- it carries out.
I am pleased, if someone sees this and can give a help of purchase.
First of all, a mirror fixing position receives pure and moves to the center side 4 or 5 cm 4 or about 5 cm at the & Rider side.
When having equipped with (I thinking that it understands if you see a photograph), for this reason a cowl (bikini cowl), the stay and the cowl of a mirror may interfere depending on the size of a cowl, and the degree of setting angle of a master main part.
Since the tank approached the Rider side by the different body formula, interference of a reserver tank and a cowl became that there is nothing.
(Since the handle of my machine is using the lowest thing, interference may be afraid when it becomes an up handle.) Used it for ten years or more, since it wore out, thought that he would OH a pure master again, but.
There were also repair parts with whose this one's having been cheaper, and since future OH was possible, parts were replaced to the kit here.
A good place is becoming easy to put in in the case of a brake fluid injection.
(since the caliber of a tank is large).
Moreover, since the reserver tank is translucent, the degradation state of fluid is intelligible.
Since DOT5 is used, degradation is early.
This cannot be a maintenance surface easily quietly.
Effectiveness condition is the same.
(Since the pure master caliper was often OH(ed), a difference was hardly understood.) Or [ that it may be thought that an operation feeling changes in a meaning so since the lever chose the short type ] ...
?! which should run happily at the end.
View detail