Reviews
Still having the same desired effect as the original blinkers when in operation but they now have a custom look
About quality and texture, I can confirm that the quality is great and that the material used is for the lenses is PMMA (polymethylmethacrylate) with a clear finish and the bulbs are glass with an amber tint. About the feeling of use, By removing the bright orange lenses and replacing them with the clear lenses, the high impact of the large original blinkers is removed while still having the same desired effect as the original blinkers when in operation but they now have a custom look. Products to buy together, While working on making the original blinkers look nicer I would take advantage of this to also add a fender eliminator to your cart to also help tidy up the rear of the bike. Difficulty of installation, I can say the fitment of the lenses for my installation was very easy due to the simplistic design of how the lenses secure to the blinkers housing with a clip and a screw just as the original ones do. Cost performance and comparison with other products, The pricing of the product is great. You receive a full set of lenses and bulbs that are of great quality. The pricing of other clear lenses sets available are much higher but if you like the smoked lenses then these can be purchased slightly cheaper from Kitaco. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Ruthenium~ is what, what, what♪
When SEROW250 is used, the corresponding MotoDX." I had been using Premium RX (DCPR7ERX-P) by replacing the plug cap, but this time, it will be MotoDX Plug (CPR8EDX-9S).
It is the same Engine as the two JigSar models, so the same application should be used.
By the way, Car has been using Ruthenium type Plug, so I have a sense of security about its durability (I think it will last longer than Windshield IRIDIUM type), and I have no negative impression about its usability, so if it is worth the cost (I don't think it will be a loss), don't hesitate to buy it! If you don't think it's worth the cost, don't hesitate to buy it!
It is impossible for us amateurs to perceive only a slight difference, but we can still feel the smoothness of the product, which we think is very good. 。 I can recommend it to many people!
View detail
The step bar is convenient.
After replacing the low seat, I was looking for a more comfortable, wider, step bar that slides back. There were several brands, but the only product that could allow the bar to fall back a bit was the Adjustable Step Bar Set. After installing it, it was wider than the original and I could move to the back and sit comfortably with my feet. This is a luxurious and stylish step bar. -------------------------------------------------- -------- The exchange of low seats was looking for a more comfortable, wider, and backing step bar. There were several brands, but the only product that could let go of the back was the only one-stop bar set. The installation was wider than genuine and moved backwards and the feet could sit comfortably. It's a luxurious and cool step bar. Powered by Google Translator View detail
It works goofily!
Used for front brake of XELVIS.
The No Brand pad that had been on the car up to that point was so ineffective that I had to throw it away, even though it was 8 parts high. In comparison, the brembo pads are very controllable, starting to work slowly in accordance with the lever-on force, and finally suppressing it with a strong force. I can now enjoy driving on mountain roads that I had been too scared to drive before.
The color of the Pad is bright Red. A sense of doing Good to get out. brembo's marking is written on the Pad and is clearly visible with a cantilevered Caliper. I have used OEM, Vesla, Red Pad, Golden Pad, etc., and this is the easiest pad to use without feeling insecure. The Fee Ring is similar to the Red Pad, but feels softer and tighter than the Red Pad.
The only thing that seems to be a drawback is the lifespan, which reaches its limit after about 5000 km. This is normal for a Pad, but for some reason the new Element was very thin (about 4mm?). The Pad with 40,000 km without replacement before the replacement had more left. If they made it thicker, it should have a longer life.
View detail
Two layers are recommended.
Cover is 2L Size, body is XSR900 (RN56J) The parking lot is used for open-air parking.
When I bought a new car, the dealer gave it to me as a purchase bonus and I was using it, but I had been using it without tightening the String at the hem, and there was a hole where the footpeg hits, probably from the wind, about the second year of use.
I bought the same product because I was not sure about the Size feel of the other company's product, as the dirt that clearly shows the Cap part of the Tank on the Others was floating around and I thought the open hole would widen if I continued to use the product.
However, the first Cover was still usable, so we decided to use two pieces with the new one inside.
As a result, two layers are good. The old outer cover is getting a large amount whiter in the front blue area due to sun damage, but the inside is still as blue as new and the fabric is still soft.
As a Motorcycle Cover, it is convenient that there is a part to put a Wire lock and a Chain lock through the front and rear Wheels. There is not just a hole, but a notch, so it is easy to put the locks through.
Size feeling is that if you don't squeeze the String at the hem, you can't get the size you want, especially Quantity.:Pair (for Left and Right) It may be good for those who want to cover it completely as the hem is just hanging on the ground with excess hem on the sides.
Instead, I don't think moisture will escape, so if you are concerned about moisture, I think the F Type with Ventilation would be better.
View detail
Parts removal and appearance change
I didn't want to wear a long and big Balancer because my body is small, but I didn't want to wear a long and big Balancer to reduce vibration. I couldn't find it, so I bought it. View detail
large-volume saving
I found this product when I was looking for a good helmet holder for my motorcycle.
Now I can avoid Helmet from theft and other dangers. I like this product very much.
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
sp takegawa oil filter cap
It's a product with good quality and texture information For usability, the engine case can be marked with red dots Easy to install Cost performance and comparative price are similar to other products and can be replaced by the brand you want WeBike packaging is always good. Shipping and packaging will arrive in a week Std oil caps can be released by hand, but these products need tools m17 socket View detail
Fit like a dedicated Cover!
[How is it used?
Used at home Garage
Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression
How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect.
View detail
Ngk is my frist choice
The quality and texture is very good .NGK spark is popular in the world so i don't worry about that. This spark feeling is same with Ngk Iridium spark . The installation is very easy. The cost is cheap The shipping is fast and packaging is very good . View detail
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
decent product
I purchased it to mount on my Monkey 125. This is an item that makes your bike more luxurious.
Also, since it cannot be removed without tools, you can prepare for any unexpected situation.
Although it doesn't stand out that much, it is a dress-up item that makes the bike stand out.
Very satisfied. -------------------------------------------------- -------- I bought it to mount it in Monkey 125. It is an item that makes the bike more luxurious. You can also prepare for the situation because you can't solve it without a tool. It doesn't work like that, but it's a dress-up item that makes the bike stand out. I am very satisfied. Powered by Google Translator
View detail
Replaced from ragged NORMAL
[How is it used?
In use in exchange for OEMFiller cap from SportsCUB
Was the one you received as per Image?
YES, cut-outs are very beautiful, anodized and even.
Was the installation difficult?
Easy to replace with OEM.
How was your experience with it?
No complaints as it's just for looks.
Level gauge becomes unusable and cannot be turned by hand. (You can turn it around if you try hard enough) Although there are some inconveniences such as
[Included Parts:were they on?
O-rings are included, so there is no need to prepare them separately.
[Was there anything that disappointed you?
None in particular
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Large capacity and good shape
It does not gap at all when driving on the highway. It has enough load capacity and looks good. The bag is waterproof and the product is well made and I am satisfied with it. I don't like the side bag to be bent due to my personality, so I mounted it on top of the Bracket, which is the width of the SeatPlusBracket, and in NORMAL mode the Magic tape doesn't reach it. Therefore, the total width is the same as the Large body grip end, so you have to be careful not to slip through. It will be good when it is new, but it will be inevitable that the color will be tarnished by sunlight. View detail
Power up when used with Iridium plugs + AS Uotani
[How is it used?
AS Uotani was installed to strengthen the electrical system of YAMAHA XJR400R.
As AS Uotani's Manufacturer, we recommend the use of NGK Iridium Plug and Power cable together, so we recommend the use of NGK Iridium Plug and Power cable together.
We decided to install NGK Iridium Plug and Power cable in addition to AS Uotani.
Was the one you received as per Image?
It was just as Image.
Since there are four cylinders, a total of four bottles are required, so each Quantity of Black and Blue:We purchased 2pcs each.
We decided to make the inside Blue and the outside Black.
Was the installation difficult?
The original method of attaching the OEMCable is to cut the OEMCable and connect the power cable using the included Joint.
This time, however, we connected directly to AS Uotani's IGCoil.
Connection Method:
1:Silicon inside (White color section) Strip 15mm of the plug cord core wire to avoid damaging the
2:Crimp the ConnectorBracket with the Crimp Tool
3:Apply more lubricant to cords and Boots.
4:Cover the Boots
5:Push the ConnectorBracket into the Coil.
How was your experience with it?
Power has increased dramatically, partly due to the use of AS Uotani and NGK Iridium Plug.
Just changing from OEMPlug cord would be quite effective.
[Included Parts:were they on?
Plug cord and Joint, Instruction Manual
[Was there anything that disappointed you?
No special requirements.
View detail
Easy to control
I use this Repeater on my Honda 400X. It is not very effective, but the Touch Fee Ring is very easy to control. I use it for my daily commute and it is easy to use in all weathers and traffic jams. I replaced it after 2.5 years with the OEM and replaced it after 1.5 years with this product. This time I felt that there was a little bit of BALI on the end face of the product, so I removed the BALI on the end face with File. (Is there a slight variation in quality from lot to lot?) View detail
High quality and very pleasant to use.
I was using a 4 year old Motorcycle Cover (about 5,000 yen at Home center), but it started to become brittle after about the 3rd year, and when I took it on and off, I could not get it off. Paste Tape when you run out." However, it has finally deteriorated to the point that even when gently attached, it will break off along the fibers.
The last one was so full of taping that I couldn't tell if it was a cover or a tape.
Motorcycle is stored under a carport so it wasn't in direct sunlight or exposed to rain, but I guess that's the life of the Cover.
When I took the new Cover out of the box, it was the same Silver as the previous Cover, but I felt a thicker and shinier Bird feeling (Well feeling, not crumbly). 。 Durability looks promising.
Size is 2L. And it is just the right size, not too large and not too small.
The Wire lock holes are also set in the front and back, and there is a cord that can be used to squeeze the hem with One-touch for ease of use.
View detail