Reviews
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Reliable
I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance.
View detail
Just right for NSR250R
I bought this for my NSR250R Cover.
It is not too thick, not too thin, just normal. When you hold the folded Cover, it is zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
DXPlug
Simultaneous replacement with Ignition coil is effective. Acceleration seems to have improved. View detail
Good product that can take 3 power supply outlets
I bought it to get power for Tachometer and ETC. The unneeded harnesses are mercilessly cut off and used as materials for other electrical work. The harnesses are too long and are in the way, and they become harness resistors and waste energy. The output side harness is also long, but do not cut that one off. The harness is connected to the battery and ACC power source, and is energized when the key is turned on, so there is no need to worry about the battery going up. The included instruction manual is very carefully written, so please read it carefully before you start work. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
quite good shape
Mirror was rusted out and replaced with a more recent form.
The navigation is easy to see and the design of the Mirror makes the vehicle feel like it has been exposed.
There is no runout when driving.
View detail
Front sprocket replacement
Since the rear sprocket was replaced, the front sprocket was also replaced.
The OEM is 14T because we want acceleration, but this time we will replace the Front with 13T.
Lowering the front sprocket sacrifices fuel economy and top speed, but I want the acceleration that makes it easier to ride with WineDINK….
Nut is a 32mm Socket.
I haven't ridden it yet, but I am looking forward to seeing how it will change.
When I changed the front sprocket, I also purchased the OEM 14T so that I can change it back if the characteristics are too large to fit.
View detail
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Yoshimura Brake Lever Guard
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike. View detail
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
Size is just right.
I purchased the DH-710 Seat Bag for my YZF-R25.
Size (H145×W235×D280mm) and capacity (7L) The fixed belt is universal, so I don't mind that there is quite a bit of extra space.
View detail
As One pointAccent
I purchased this to match the Rear Sets Gold.
Posh's Gold is almost the same color as Babyface's Gold and blends in very well.
Installation took less than a minute as all I had to do was turn the cap and replace it.
I also like the nice design of the Seal that attaches to the lid.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Unika Kogyo BlackMotorcycle Cover
I was looking for a motorcycle cover for my MT25 Yamaha Motorcycle Cover, which I had been using for many years, but it was torn due to age-related deterioration.
I chose the size L L and wondered if it was too large. I thought it might be too big, but it was JUSTHit.
View detail
That's what SSK is all about!
[How is it used?
Used for Tandem or Dress-up
Was the one you received as per Image?
Was the installation difficult?
It's easy
How was your experience with it?
Good looking compared to OEM
[Included Parts:were they on?
None
[Was there anything that disappointed you?
A little overpriced?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Enough where there's a roof over your head.
I bought it because it was on Sale.
Slightly thinner than expected, but not completely waterproof type, so it is sufficient under the roof.
Large front and rear locking holes are easy to use.
There is a Strap in the Center that can be closed and used.
Good for people who don't like the visible Type, as it goes all the way up to the Tire.
Nija400 and LL is about as roomy as you can get.
View detail
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail
Maybe LL would be better for Z900RS people?
L makes it seem a little small.
If you make it LL, it's just right.
View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
The atmosphere has changed completely and it has become Sporty!
It is perfect for YAMAHAGRAND MAJESTY, easy to install, no problems, wider field of view, increased safety, and most importantly, Parenthesis is great! View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail