Reviews
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
Speedra Carbon Tail Light Cover
The OEM ABSTail Lamp Cover is cheap, so we changed it to …Speedra's Carbon Tail Light Cover!
The texture will be much better.
View detail
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
It was before, so I don't know much about it. (Sweat)
View detail
![Gasket，12X22X2 [92065097]](https://img.webike-cdn.net/catalogue/images/129465/92065-097_TS.jpg)
Purchased for a 12 year MODEL ninja 1000
This is the first time I have used this Drain Washer.
I used to use Drain Washer purchased from Motorcycle shop, but I bought it because I ran out of stock.
I don't think it's a problem since it's OEM, but just to be sure, check the area around the Drain Washer after test run after replacing the Oil.
It didn't leak, so it's Large sturdy.
OEMs are secure.
View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
![Compact half cover [large]](https://img.webike-cdn.net/catalogue/images/91554/22144_TS.jpg)
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
PetitCustom
VERSYS has the Label stopped Rivet on the Frame in some countries where it is sold,
It is not attached for Japan and the mounting holes are blocked with Rivet.
I found this product on the Net and after researching it, I found that the hole pitch seemed to match, so I purchased and installed it.
Fastened with a 4mm PopRivet.
View detail
Be careful when making a hit.
I have not purchased this product in a long time.
It is a good quality pad that can be used on public roads and circuits in all weather conditions.
The Control at the beginning of the grip is similar to the Rear, which is useful when the foot is unstable.
Braking power doesn't matter in the rain, and it doesn't become blatantly ineffective like a cheap Pad.
It's a little further back that you'll get decent braking power compared to the Pad, which has a quicker startup.
The braking force is satisfactory for use on public roads.
With Circuit, you have to grip it hard to get enough braking power.
I guess that's what I'm talking about in exchange for Control.
I have no complaints about the release condition of the Pad at my Level.
Compared to the 6POT Pad, if overused, Lever will be in the back.
But that is only at the beginning. If you adjust Lever to a wider range beforehand and start driving, there is no problem.
I think it is a good Pad to use with BPF, in my opinion.
This level is just right for that characteristic of gripping a little and entering with a "scauper" sound, and then returning with a jerk after releasing.
I don't think the price is too high, so I will still be Repeat.
What you have to be careful about is when you make a hit.
It does not work as well as you might think, so be sure to check the effectiveness of the system or there is a high risk of a rear-end collision.
Be careful if you use Brake strongly from the beginning and stop after a short distance.
View detail
![TAKUMI Motorcycle Cover Ver.2 [LL]](https://img.webike-cdn.net/catalogue/images/21036/photo1_TS.jpg)
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
I purchased the Motorcycle Cover because it was out of date.
The handling is very easy and the double structure is very good for a Full Cowl Motorcycle Cover.
Also, GSX1300R HAYABUSA (Type 2) I was able to install the Cover with the GIVI Top Case Bracket still in place.
View detail
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
add-25r Use BlackMotorcycle Cover 3L
[How is it used?
Motorcycle Cover in Garage
Was the one you received as per Image?
As per Image
How was your experience with it?
It is easy to apply.
[Points to note]
Be careful with Exhaust System after driving or when it is hot.
How did it compare to other products?
The delivery time is fast and the price is good.
Other items that would be helpful
Installation Point or hang
This size is just right with SeatBack mounted with zx-25r up on Motorcycle stand in front and back.
View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
this is one of the parts that required for 2013+ ZX6R steering damper bracket. these are the parts list for the bracket excluding the steering damper and bolts: BRACKET 11056-2308 BRACKET 11056-2315 WASHER 92200-0293 COLLAR,L=3.3 92152-0834 WASHER-PLAIN-SMALL,8MM 410AA0800 View detail
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
SPEEDRAMaterial:Twill Weave Carbon glossy Drive chain guard
The installation was not particularly difficult and was done by replacing the OEM.:Twill Weave Carbon shiny and looks up, the shape is more rounded than OEMGuard. View detail
Be careful and read before you buy this.
This grip could not fit to your motorcycle. Even if the product describes you can use this, it may not be on your bike. I got one cuz it was supposed to fit my bike but it didn't. so I asked it seller(the brand Kijima) and they replied that 'This item is not compatible with Eliminator 450. Eliminator 450(US imported version) and Eliminator 400(Japanese domestic version) are completely different motorcycles. So I asked about the dimensions of the handlebars to official Kawasaki global and they replied 'The diameter of the EL400's handle bar is same as that of EL450's.' I sent this reply to the seller and got the reply 'The compatibility information on our website states that it is universal. Therefore, some processing may be required. Please understand that if a customer buys the wrong item due to a confirmation error, we cannot accept returns / refund.'. When I received this message, I gave up to claiming it and decided never to buy anything from Kijima. View detail