Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to hang and wind resistant. Very good.
I use this Repeater on my CT110 HUNTER CUB and GB250 CLUBMAN. It is my favorite.
I bought it last year when I bought a CT110 HUNTER CUB, because I was planning to add a front carrier and a RODCarrier to it. I am sure it will be a good reference for those who are considering purchasing it.
The front carrier is made of DRC, the largest class, and is fixed at the most forward position, so the front of the handlebar is considerably longer than in NORMAL, The height of the LeftFront section of the Rear Carrier is 10cm higher than the Seat. The lower part of the front wheel and Quantity:Pair (for Left and Right) As you can see in the photo, I can close the RearFastener to the very bottom, even with the bottom rope tightened quite a bit. I live in an area that is occasionally exposed to strong winds, and the Seat has never rolled up.
Also, I have been using it for over a year now and it has not deteriorated much. (There is a short period of time when the parking Space is in direct sunlight.) Not much dirt on it. (It has a roof, so it is virtually dry even in the rain.) and I have never washed the surface with water. I am very satisfied.
I bought it for GB250 CLUBMAN almost one year after CT110 HUNTER CUB. It is rather a little bit large, so the front wheel lower part and the quantity of the front wheel are a little bit smaller than the original size.:Pair (for Left and Right) The Adjuster rope at the bottom is fully squeezed. There is still room to spare, but not so much that it will flip up in the wind, so we are not worried at all.
Perhaps if it were exposed to rain and direct sunlight throughout the day, the evaluation of deterioration might change, but I cannot comment on that.
View detail
GB Engine Guard
[How is it used?
24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image?
high
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
OK
[Was there anything that disappointed you?
Oil replacement has become a bit more difficult.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Size is Exactly
The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly.
View detail
Meter visor installation
With the right tools, it was not too difficult to install. Maybe a larger size would be better for wind protection. View detail
Bag Support
Used as support for DEGNER's Waterproof Bag during touring View detail
Fits: HONDA GB350, HONDA GB350S
I think COSPA is expensive
I bought a new car with the new Type added and I replaced it.
The bend of Lever was good and it was easy to finger.
Clutch side rattles have been reduced and the clutch is easy to grip.
Some products are expensive, but Quantity:Pair (for Left and Right) So I think the cost performance is high.
View detail
Gorgeous.
I think it is the Large type among OEMOption and others.
Installation is easy, but there are some situations where it may get caught when getting in and out of the car because it is a large type.
Please consider those who have concerns about the high Seat height of the car.
View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Casually Fashion
I love the casual Fashion!
It's just self-satisfaction.
View detail
Reliable DAYTONARed Pad
I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion.
View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
Cheaper than OEM
This will be no problem, unless you need OEM! You can spend the difference on Oil. View detail
Balance between cosmetics and seminal vesicles
The cost performance is good for the braking power, as there is little reduction in braking power. View detail
Less expensive than OEM
It is less expensive than OEM. Performance is probably comparable to OEM. View detail
The quintessential YOSHIMURA!
Texture is very good! Logo is also very good View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Wind protection for now
It is inconspicuous and has a good OEM texture, so I put it on for now to protect against wind at high speeds. View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail