Reviews
Easy to grip due to its folded shape
I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail
Buy wisely in bulk! Recommendation for those who own several motorcycles!
10 pieces Quantity for business use" at a great price:The "Set" is a great recommendation for those who own several motorcycles, because you can buy them in bulk at a low price! It may seem like a lot to have 10 sets at once, but I have a Ninja 250SL and a Z125, and the discount is very helpful for me! View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
520Conversion
I was able to Conversion from 530 to 520. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Fits: KAWASAKI W650, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, YAMAHA FZX750, YAMAHA TZR250, YAMAHA FZR250, SUZUKI GSX250, SUZUKI GSX400, YAMAHA SR500, YAMAHA YZF-R25, YAMAHA XJR400, YAMAHA R1Z-Z, YAMAHA FZ400, YAMAHA SR400, YAMAHA MT25, YAMAHA MT03, HONDA X-4, HONDA VT400, HONDA CL400
If there was a little more room for Size, there would be nothing to say.
Purchased the L size to use on Kawasaki ZrX400 after checking the fitment guideline.
I can do what I can do with the Cover, but it's pretty tight.
Fastener is useful and the Material seems durable, so that part is a little disappointing.
I'm thinking that one LLSize above would have been just fine.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Gone.
Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
DJEBEL250xc.
Installed on a DJEBEL250xc, cutting off the OEM ignition coil in the middle and connecting it. It is a recommendation to refresh the electrical system. View detail
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
I can't physically feel it.
It is made by DAYTONA. I usually use the NORMAL version, but I bought the Super oil filter to try it out, which claims a 20% increase. Naturally, I can't feel the difference, but I can feel the difference. The price is not much different, so this one might be good too. In any case, it is a good cosmetic product. View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Size did not fit….
I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.
I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.
One of my colleagues at work is a motorcycle rider, so I gave it to him for free.
I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time.
View detail
Other Brand Product
Purchased in lieu of OEM Parts.
Which would be less expensive?
Functionality is fine.
Installation requires a hang.
Manual would be useful.
If you make a mistake, oil will leak.
Your attention, please.
View detail
Would have to be one of the better value magnetic drain bolt
About quality and texture, I can confirm that the quality is great and that the material used is aluminum alloy with a permanent magnet on the base of the bolt. About the feeling of use, Would have to be one of the better value magnetic drain bolt that allows for securing with lockwire and successfully removes fine iron powder from the engine oil.Products to buy together, The drain bolt only comes with one sealing washer so it would be a good idea to add a few spare sealing washers to your cart for future oil changes.Difficulty of installation, I can say the fitment of the drain bolt for my installation was very easy due to the exhaust not limiting the access with the use of a socket and 3/8 drive ratchet.Cost performance and comparison with other products, The pricing of this product is great. You receive a drain bolt with a strong magnet and the head of the bolt has the functions to attach locking wire. The pricing of other drain bolts with similar features like the one from Takegawa is double the price and I don't see the reason for it.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA XL250 Degree MD31, HONDA XL250 Degree MD26, HONDA XLR250 R (Baja) MD16, HONDA XLR250 R (Baja) MD20, HONDA XLR250 R (Baja) MD22, HONDA XLR250 R3 (Baja) MD20, HONDA XLR250 R3 (Baja) MD16, HONDA XLR250 R3 (Baja) MD22, HONDA XR250 (Baja) MD30, HONDA XR250 (Motard) MD30, HONDA XR650 L, HONDA XR650 R RD06, HONDA XR650 RE01, HONDA CBX250 RS MC10, HONDA CBX250 S MC10, HONDA CBX250 SS MC10, HONDA XR400R NE03 96-98, HONDA XR400 Motard ND08 05-09, HONDA XR600R PE04 85-93, HONDA NX650DOMINATOR RD02 92-94
It is the best cospa
It can be used in the same way as OEM Product and is very cost effective.
The product was highly accurate and there were no oil leaks, etc.
View detail
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
To be used for DTRACKER125
I plan to use it for the next oil change of my DTRACKER125. It is a commuter motorcycle and I replace the oil every 2000 km, and I replace the filter every two times. View detail