Reviews
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA Steed VLS Springer NV400CSW, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750, HONDA Shadow 750, HONDA X11, HONDA VT750S, HONDA VT400S, HONDA CL400, HONDA CBX550F/Integra, HONDA CBX400F, HONDA CB750F
Used for VTR250
OEM-like, yet inexpensive
The VTR250-03 I bought used had a Short Type variable lever, but it was difficult to use, so I switched to this one.
I think they are very similar to OEM parts. The cost is very reasonable, so even if you break it, you don't have to worry about it.
Don't forget Grease/Oil when replacing.
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
It looks cute and soothing!
I bought this to hide a Fastener scratch on my Tank and to prevent future scratches.
It looks cute and the fact that you can choose your own position for the back eyes is great!
I am concerned that it will get wet in the rain and fall apart, but so far I have been able to use it without any problems, partly because I have the Cover on!
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
Over 20 years of use
We have been using it for over 20 years and have never had a Trouble.
There is an Overhaul opportunity for Engine,
I also had the person who asked me to do the work check the Cylinder,
There were no abnormalities at all.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
It feels good to change it.
It is compatible with OEM, so there is no problem at all in use and installation.
It is not expensive, so we replace it with each Oil change, although it does require the time and effort to remove the Filter.
It may be a little overprotective, but …….
However, it would be helpful to change it so I can feel good about my ride and get it at a reasonable price.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, BMW G650 Crossmoto, BMW K-1 (Japanese kick-boxing promotion), BMW K1100SR, BMW K1300R, BMW K1300S, BMW K75, BMW R1200R, BMW R80, BMW S1000RR, DUCATI 1000, DUCATI 800, DUCATI 999S, DUCATI 999SS, DUCATI Monster1000, DUCATI Monster1100, DUCATI Monster1100S, DUCATI Monster800
There's some kind of seepage...
Used for outdoor storage.
When I removed the Cover and checked the Motorcycle after it rained, there was some White Stain on it...
Apparently, every time it gets wet, this Cover's Waterproof (Fire protection?) The ingredients seem to be seeping out.
Fortunately, the stain is easily removed with water, but it is too much of a hassle to have to wipe it off each time, so I would not repurchase.
Also, it is pretty peLePera and has a lot of room in the Size, so it flops around a lot when a strong wind blows.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
It was EXACTLY what I expected.
The Motorcycle storage area has a roof, but it is inevitably blown in from the side, so we replaced it with a new one,
The product description indicated that it was not suitable for cars with boxes, so I was prepared to remove the box before applying the cover, but when I tried it, the size was sufficient without feeling too tight.
The fastener is located in the right place, so it is easy to hang the cover and change the large size. When not in use, it can be stored by hanging it on the Hook, so there is no need to worry about it getting dirty from contact with the ground, which also makes it much easier. It may be a trivial matter, but I think I will be able to feel much better if I can save labor on these troublesome things.
The fabric felt a little thin, but on the other hand, I felt it was easy to handle without feeling stiff.
Motorcycle is Z900RS CAFE with SHAD23 side case. Please refer to the following images for reference.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA STEED600, HONDA STEED400, HONDA SHADOW750, HONDA SHADOW600, HONDA SHADOW400, HONDA VTR250, HONDA VTR1000F FIRE STORM, HONDA VT750S, HONDA VT400S, HONDA VFR800, HONDA VFR750R, HONDA VFR400, HONDA RVF750, HONDA RVF400, HONDA NSR250
Lidea Brake lives
Purchased for Honda
A little expensive, but I'm satisfied with the color custom order.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
Does not melt properly
I have not used it that many times yet, but I put it on right after I finish a run and it doesn't melt.
Use is also quite easy thanks to Rear's Fastener.
The price is also on the cheaper side of Body cover, so I am satisfied.
I am concerned that it is a little thin, but …….
Now I'm hoping for durability.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1M, HONDA 400X, HONDA CB1300 BOLD'OR, HONDA CB1300 SP, HONDA CB1300SF, HONDA CB400F, HONDA CB500F, HONDA CB650F, HONDA CB900 HORNET, HONDA CBF1000, HONDA CBF500, HONDA CBF600N, HONDA CBF600S, HONDA CBR1100XX, HONDA CBR400R
520 for Conversion on the 2021 MT-09SP.
The Chain on my 2021 MT-09SP rusted due to forgetting to apply lube after cleaning, so I used this Sprocket as a 520 for Conversion while replacing it.
When selecting the rear sprocket, I thought that the Duralumin sprocket might wear out faster, so I also purchased the RACINGSteel, which seems to be more durable, but the Duralumin sprocket weighed about 310g and the RACINGSteel weighed about 870g, which was unexpectedly heavy. The RACINGSteel is heavier, and I thought that the Duralumin product would be better for the MT-09, which is characterized by its light handling, so I installed the RACINGSteel here.
If the Duralumin is worn out too quickly, I will replace it with RACINGSteel.
Installation is not particularly difficult, but there are holes at the same intervals next to the mounting holes, so if you want to install it, you can use these holes as well, so be careful when working in a dark place.
*I had seen on someone's blog that they had actually left marks where they had been installed incorrectly, so I thought no way, but I was about to actually do it when the sun went down on Blue Sky Garage.
After the installation, the synergistic effect of the front and rear Sprocket and 520 Chain was felt as the friction was reduced and the weight was lightened.
Specifically, when braking at low speeds with embracing the brakes, the car seems to move forward more than expected.
Also, when going uphill, I used to feel a little uneasy unless I was in 3rd gear, but now I feel like I can go uphill in 4th gear.
Unless you are a long distance runner or the latest SUPER SPORTS750 with 200 hp over, etc., I thought the Merit of lightness was Large, as the Duralumin product would hold up well there.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F, HONDA CBR400R, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE, HONDA CB900F, HONDA CB750, HONDA CB650F, HONDA CB650R, HONDA CB400SF
Oil Filter
I purchased the Oil Filter and put it on my mt09, it is a good and stable product. View detail
Fits: YAMAHA bolt, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, SUZUKI BOULEVARDS50(INTRUDER800,VS800GL), SUZUKI DESPELADO800(MARAUDER800/VZ800), YAMAHA Bolt, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1700R100 ROADSTER, SUZUKI INTRUDER1400, BMW R1200C, HONDA VT400S, HONDA VT750S, HONDA SHADOW Custom, HONDA SHADOW400, HONDA SHADOW750, HONDA STEED400
I use this Type from Y's Gear on every Motorcycle!
This cover is a domestic product, and I have always used this type of cover from Y's Gear, including my previous motorcycles, and this is the third one of different shapes that I have purchased.
This type is not Completely WaterproofSpec. but it is designed to be used in the event of heavy rainfall, where some rainwater will soak into the MotorcycleBody. (3rd photo) I buy knowing that.
one-eyed:Kawasaki Ninja 400 => The size of the cover was a little too large. (Maybe I got the Size wrong) The wind was blowing, the Cover was flapping, and the corners of Henry beguine's synthetic leather SeatBack were rubbed and sore. (5th photo) I think it is better to protect the attachment of soft material with Towel or something and cover it with Cover. I think it is probably due to the flapping caused by the wind.
The second:Imported 750cc => Almost ExactSize for three whole years and still in use, no tears in Cover, with Hole. I think it is an excellent product. During the rainy season, the inside of the MeterGlass fogged up once when I left the Cover on and the motorcycle steamed up, but it was fixed by removing the Cover and drying naturally. I think it is inevitable when storing outdoors.
third (e.g. in a series) (Item purchased this time):Yamaha Bolt => Almost ExactSize and will last as long as the second one. Leather Tool case with 100size, for human head, WaterproofShowerCap (3rd photo) and then this Cover is applied over it.
I think it fulfills its role as a Motorcycle Cover well.
When outdoors, I use the Covers because I think they are more dust-proof and also provide some security measures than storing the motorcycles bare.
Our Motorcycle Placement (Outdoor) The building is not exposed to direct sunlight until late afternoon. It also has a roof that is about the size of an eave, and depending on the direction of the wind, it can also keep out direct rain. Therefore, the Motorcycle Cover may have lasted for a long time.
As noted in the notes, the heat of the Engine and Exhaust System is allowed to cool before applying the Cover.
View detail
Fits: HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SF NC31, HONDA CB400FOUR NC36, HONDA CB400SF VTEC Revo/SUPER BOLDOR NC42, HONDA Compatible with CB400SF VTEC NC39 SPEC2/SPEC3, HONDA CB400SF VTCE REVO/CB400SB NC42 ABS, HONDA CB750 RC42 *No instructional vehicles allowed., HONDA CB400SS, HONDA CBR400F ALL MODEL, HONDA CBR250R MC19, HONDA CBR250RR MC22, HONDA CBR250R MC17, HONDA CBR400RR NC29, HONDA CBR400RR NC23, HONDA CBX400F ALL MODEL , HONDA NC750S RC70, HONDA NC700X RC63, HONDA NC700S RC61
Adjust leverQuantity:Set
ClutchPower has been reduced.
I'm glad I bought it
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
I'm replacing it anyway.
[How is it used?
I replaced the oil filter at the same time when I replaced the oil in the ZX-7R. I use a cheap oil filter because I don't care what kind of oil filter I use.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the filter with an oil filter wrench and tighten the new filter with a hand wearing a rubber glove.
How was your experience with it?
I don't feel anything in particular, I would be happy if you Catch Garbageetc.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've touched a few vehicles with stupidly tightened Oil Filters, and I always thought, Torque check it out.
In the worst case, if it does not come off, stick a penetrating driver in and turn it to remove it.
View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Thinner and less slippery than NORMAL
The normal grip on the Yamaha Bolt was very thick and I personally felt uncomfortable with it, so I replaced it with this grip.
Quantity:Pair (for Left and Right) There is a small gap between the grip end and the body side, but I don't mind this gap.
It doesn't slip and I like the design. I am satisfied.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, YAMAHA YZF-R6, YAMAHA YZF-R1, HONDA Shadow slasher400, HONDA SHADOW400, HONDA VT400S, HONDA NM4-02, HONDA NM4-01, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA INTEGRA DCT(for International Model), HONDA CTX700N DualClutchTransmission, HONDA CTX700N, HONDA CTX700
Manufacturer shipping error?
The texture was good.
The quality was just right, with no BALI and not too much beveling.
…… but the mounting holes etc. are different no matter how I look at it.
I thought it would be good, but I am very disappointed.
View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA CBR400RR NC29 , HONDA CBR400RR NC23, HONDA CBR400F, HONDA CBR250RR MC22 , HONDA CBR250R MC19, HONDA CBR250R MC17, HONDA CB750 RC42 *No instructional vehicles allowed., HONDA CB400SS, HONDA CB400SF NC31, HONDA CB400FOUR NC36, HONDA Rebel300, HONDA REBEL500 PC60
Adjust lever
Aluminum adjustable lever is easy to install. (Installation Instruction Manual is available)
Very easy to use. I liked the adjustable grip width, the Large change, and the choice of good looking colors. I was told that it would take two months to get the product because it was out of stock, but I received it in one month. I am very grateful for that, because I could not find this model at other manufacturers.
I am especially glad that Clutch is lighter.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
There is no lie in my name.
How easy it is to write is shown in the product description, and my impression is that I have actually used it. By far the easiest to put on compared to a regular Motorcycle Cover."
It has holes in the front and rear for keys, thick fabric, and heat-resistant fabric on the silencer part.
If we were to seek even greater satisfaction, it would be in the form of improved waterproof performance and a lining that does not damage the vehicle body, but we also like the sense of balance of keeping the price at around 10,000 yen, which is affordable for many users without seeking perfection to that extent.
The disadvantage is that the crosswind enters GunGun from Center because there is no cord to hem only front and back.
If you try to tie the MotorcycleCenter to prevent flapping, this Cover lowers gently from front to back (see the picture in the product description), so the top of the MotorcycleCenter is hollow (good for preventing scratches from rubbing against the tank, but increases the risk of tipping over in windy conditions). (This is good for preventing scratches from rubbing on the tank, but increases the risk of tipping over in windy conditions)
The size of the GSX-S1000GT is a little large if the Pannier is not installed, and a little tight in the back if the Pannier is installed.
View detail
Fits: HONDA SHADOW750Classic, HONDA VT750S, HONDA Shadow slasher 750, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450R, HONDA DN-01, HONDA TRANSALP 600V, HONDA Silver wing 600, HONDA SHADOWPHANTOM 750, HONDA CRF450R, HONDA CRF450R, HONDA Silver wing 400, HONDA Shadow slasher, HONDA Shadow slasher, HONDA SHADOW 400 Classic, HONDA VT400S
Included Parts:I bought it because it wasn't
Purchased as needed to replace Slip-on Silencer View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
Easy to take off and put on
Anyway, it is easy to take off and put on, even with Side Back on, it fits in Exactly2L. As it is a daily use, I am satisfied that it is extensively attached from the beginning instead of attaching Seat in terms of heat resistance. View detail