Reviews
First Oil Replacement and Oil Filter Replacement
DL1000 V-STROM250 for the first 1000 km Oil Replacement and Oil Filterfor Replacement
Purchase it, as it comes with a Gasket for the Drain bolt and Rubber Gasket for the Filler cap.
I thought it was a great deal.
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI GSX-S1000, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI BURGMAN400, SUZUKI GSX250R, SUZUKI V-STROAM650XT, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT
Atmosphere changed.
Since I changed the Handlebar, I also changed the Bar End. View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
DAYTONAChain beware!
Chain hole is too small to fit Daytona's Chain. View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Reliable front brake pads with linear feeling
This was my first time purchasing and installing brake pads. The Red "AKA" Pad seems to be a good "moderate" choice. The price is average, and the quality seems high. The pads I replaced were the factory equipment, Tokico/Toyo pads. They were in use for over 40,000kms and the performance was lacking due to old age. In comparison, the stopping power of the Red Pad is better. While testing them, I was able to lift the rear wheel from the ground. The feeling is "linear," or a steady increase in force as the lever is squeezed. There is no sudden movement or unexpected jolts. Installation was simple, according to the official service manual. It is best to clean and maintain the caliper while replacing the pads. Also consider checking and bleeding the brake fluid at the same time. Shipping cost was reasonable, and the packing quality was high. Webike deliver well in this regard. Make sure to double-check the shape and number of pads your bike requires! For V-STROM 650 front brakes, I needed two seperate sets of pads. I recommend looking up a video of the replacement process beforehand. View detail
Replaced with AJ59SUPER CUB110 Iridium plugs
To be honest, I don't know much about the effect of replacing it. 100% of the vehicles I have purchased so far have Windshield IRIDIUM in them.
I only feel that the Engine is working better, but that's OK, it's a world of self-satisfaction.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-Strom 650, SUZUKI V-Strom 650 XT
I purchased it for my Suzuki SV650.
While ordering various items for Suzuki SV650,
I ordered. The quality is good and the price is very cheap.
I am satisfied.
The spark plugs just need to match the part number, so don't worry about the expensive price.
Better than OEM products from Suzuki dealers or online malls.
I recommend purchasing it from WeBike. -------------------------------------------------- -------- I ordered various things for the Suzuki SV650 I ordered. The quality is good and the price is cheap. I am satisfied. The ignition plug only requires the part number, so at an expensive price OEM products or online malls at Suzuki store It is recommended to buy from Webike. Powered by Google Translator
View detail
Not just fitSize, but no problem.
It was used when Oil was replaced in May 2023. Gasket removed at this time. (used by a familiar Dealer). The outer diameter of the "Gasket" is φ20mm, which is larger than the outer diameter of the "Drain bolt" (about φ19mm?). The inside diameter is also larger than the drain hole on the crankcase side, and there is a recess in the shape of the drain bolt left in the gasket. The inside diameter was also larger than the drain hole on the crankcase side, leaving a convex shape in the form of a drain hole, which is evidence that the Gasket was properly deformed and fulfilled its packing role.
The Daytona Gasket I purchased this time has an outer diameter of φ18mm, which is smaller than the outer diameter of the drain bolt, so I am a little worried about whether the tightening strength per area will be too much, but aluminum is soft and easily crushed, so this is about the same size as the Torque. (25N-m) Crankcase at (possibly made by Casting Iron?). The side will not be deformed.
I drove it as fast as I could for about 100 km after the replacement and about 250 km after that, including after that, until I gave it away in February 2024 at 8038 km, and there was no Oil leak. It is functioning properly.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Fashion starts at your feet
Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).
[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.
→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.
(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.
MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。
[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.
good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.
important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.
Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car.
View detail
I like that it contains everything I need to change the oil.
I bought one gsx-r125 and one katana, so there are two in the picture.
It's convenient to order because everything you need to change the oil, along with the filter, is included in one box. Now you don’t have to look through WeBike.
The price is cheap, as expected from Daytona.
I think I will continue to buy one in the future and use it when changing oil ---------------------------------------- ------------------ GSX-R125, Katana live one by one and two photos. It is convenient to order because it is all in one box that you need when you go oil with the filter. Now you can do it in the weaving The price is also cheap. As if I would continue to buy one by one in the future Powered by Google Translator
View detail
Fits: HONDA NC750X, HONDA NC700X, HONDA Silver wing600, HONDA Silver wing400, HONDA FORZA X, HONDA FORZA Z, HONDA PS250, HONDA FAZE, HONDA CBR250R, HONDA CBR250RR, HONDA VTR250, HONDA FTR223, YAMAHA FJR1300, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI ST250, KAWASAKI W650
very good
They took good care of us. Thanks to them, I was saved. View detail
durability
I use it for its durability.
(10000-30000km)
View detail
![PREMIUM ZONE Filler cap [M20XP1.5]](https://img.webike-cdn.net/catalogue/images/15651/91887_O01_TS.jpg)
Filler cap
The engine area is black and the GoldCap is accented with Accent. View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000
Buy ja59
I wanted to install a low thickness bar end on my ja59, so after removing the OEM bar end, I tried to install it, but it was not possible.
I think I can install it by cutting and shortening the bar end fixing part, but I think I will save it for another motorcycle this time.
I learned a lot, I couldn't install it, but the design is good and I am satisfied with the product!
View detail