Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Have you become snappier?
[How is it used?
I bought it because I use Enduro as my main and use Clutch a lot for logs and gullies.
Was the one you received as per Image?
It is exactly as shown in the Image. I even feel that it is packed more Compact than I expected.
Was the installation difficult?
Simply replace the existing clutch spring that is holding it in place, and if you work with the motorcycle on its side, you don't even need to pull the oil out. You just need to make sure that the spring is properly seated in the Retainer groove.
How was your experience with it?
Since the last time I rode the Washer, there was a little bit of free time, so I could not say that there was a drastic change! I used only one washer, so I may add another washer to change the characteristics a little more.
[Included Parts:were they on?
The bolt has a countersunk hole to reduce friction and a hexagonal head. The torque is 10Nm, but if you do not have a hexagonal tool, you will have to tighten the bolt by feel.
[Was there anything that disappointed you?
No, it is not. This time the test was at low speeds, so I am looking forward to seeing what happens at high speeds.
View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Regulators are consumables.
For the past year,,, my car TW has had certain symptoms.
The small light bulbs such as Blinker and Tail lamp frequently go out... and the Headlight Bulb frequently goes out. 。 The battery also went up frequently...each time I changed a new Valve or battery, but there was no improvement at all.
I thought that the vibration might have caused the Valve to break, but it was so frequent that I became concerned.
I checked on the Net and asked a motorcycle shop, and they said it might be a regulator. I asked a Motorcycle shop....
from the start "Regulator." What is a "what"?
"Regulator." The "PARTS" are the parts that mainly play the role of voltage control and rectification, in other words, they are the organs that mediate the delivery of battery power to the car body.
If there is an abnormality in Regulator
(1) Battery leaking → sometimes smelly (lol)
(2) Headlight is becoming → easier to break.
(3) Charging does not take place → Replacing with a new Battery did not help.
Totally my symptom (laughs).
If this part is broken, high or low current will flow due to the ineffective power regulation.
In other words, in my case, I thought the Light or Blinker was cut off by the high current.
I tried to check the Manufacturer's Sitec. and asked questions directly to the Manufacturer, but they did not give me a clear cause of the problem. It's controlled by semiconductors with no contact points, so it basically never wears out." Responses such as. I guess the→regulator had no way to answer because the lifespan is basically not clarified (laughs).
But in fact, the Regulator is out of order. (Puncture) I do.
After Regulator replacement, symptoms such as battery degradation and blinker breakage were completely fixed. Proven.
According to the motorcycle shop, there were some single-cylinder, medium-sized, and small-type owners like myself who had experienced one failure each among the three models they owned.
"Incidental symptoms..." In fact, the explanation that "the problem is not a problem," cannot be taken seriously. In fact, the Parts replacement improved the situation, and 。 Understand that it is consumable.
Also, Regulator failure. (Puncture) The "H" is said to occur more often in medium and small engine displacement volume vehicles than in large engine displacement volume vehicles. Especially in air-cooled
So what caused it in the first place?
The one that is said to be an improved version of Regulator has a heat sink, which is a heat-resistant spec. added to it, Regulator failure is caused by heat. It is easy to predict that
Is it age-related deterioration, or is it the heat generated by the air-cooled single cylinder?
good point
◎After replacement, Battery degradation and lighting of lights were stabilized.
◎Engine startup is also improved.
◎Axel is now better.
◎Meter movement is also Smooth.
In the end, all areas related to electricity were improved.
It's been 20 years since I bought it used... I don't know how it worked without regulator replacement (laughs).
If you have an older vehicle and the batteries are deteriorating quickly, or if you have problems with the lights, you may want to think about replacing the regulator.
It will be in good shape when you replace it.
View detail
Replacement from OEM
Used in Circuit.
It is a Pad that is easy to control.
It is good that it does not decrease too fast.
Dust also depends on the Course, where Brake is used.
There are many, and some are few.
Strong and stable in temperature changes.
I don't run in the rain, so I don't know.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Replacement from 3xvOEM Product
While replacing the Ignition coil in 3xv,
I decided to replace the OEM Regulator before it breaks.
Originally, it was easy to stall due to Plug being covered during Idling,
I suspected the ignition system.
Regulator is located behind Rear shock,
I needed a long Hexagonal Wrench for the replacement,
I also removed Seat Cowl,
The fuel tank and air cleaner could be removed and replaced from the top without difficulty.
The product is Blacks than I expected and I installed the terminals on the side without the paint film.
I also sanded and polished the terminals just in case.
It is a little thicker than OEM and Large size, so the original Bolt was not long enough,
A slightly longer Bolt was used to secure it.
There was no Instruction Manual available
My impression is that it was exchanged at the same time as Coil,
Anyway, Idling became stable at 1000~1300 rpm,
I am glad to know that I am not having to worry about CDI or Battery failure.
However, the lack of Torque and jitteriness at startup was not improved!
(It's a 2nd 250, so maybe this is what it's like)
The price is less than half of OEM Product and the quality is better,
I thought it was a pretty good deal.
View detail
TZR3MA'89
Replaced from OEM (old part).
With the new battery, the old part maxed out at 14.1v, but this one goes up to 14.7v even during city driving. It is stable at over 14v while driving. It feels like it is doing its job. We will have to wait and see how durable it is. There are heat resistance measures, so I have high expectations.
I am glad I got a longer Bolt for the fixation because as you said, the fin part of the Bolt is thicker than the fin part.
View detail
Fits: YAMAHA YZF R-7, YAMAHA NIKEN, YAMAHA MT 10, YAMAHA FZ-10, YAMAHA FJR 1300, YAMAHA SUPER TENERE, YAMAHA R1, YAMAHA FZ-10, YAMAHA FZ-1, YAMAHA XSR 900, YAMAHA XSR 700, YAMAHA MT09, YAMAHA FZ-9, YAMAHA FZ-8, YAMAHA R6S, YAMAHA R6, YAMAHA MT03, YAMAHA R3, YAMAHA MT-07, YAMAHA FZ-07
Genuine Driven D-Axis HALO Fuel Cap for MT07 2017
It was time to show the MT07 some love and I had always wanted to get a keyless fuel cap, so went for this gorgeous Driven Halo D-Axis one. This fits a lot of different Yamaha models from the last 5 or so years, maybe a little older. I went for the blue on black and to be honest, the pictures do not do the cap justice at all. I found the correct part from Driven webisite. This worked out around the same price as I could source directly from Driven but they did charge a lot for direct shipping, so of course, Webike was my choice for this reason. Along with a few other parts, the order was shipped using EMS fast and arrived in the usual 5 days from shipping. The parts in the outer box were all nicely packaged and even though this was a weird shape, it clearly did not move in the box as nothing had any damage at all. This kit has a nice matt finish which goes really well with the bike's matt tank. The blue is a stunning contrast to the matt black and this really does stand out more than you would imagin. Fitting was fairly straight forward, just unbolt the old, and bolt in the new. The screw cap is not tricky to add. All the threads are perfect, nice and smoooth action. It nips up pretty tight but if you are wearing leather gloves, you can still get it undone without removing your gloves. End result is awesome. This looks so much better than the one that came on teh bike originally. Veyr very very happy customer and happy bike. Great stuff Webike, thank you. View detail
Fits: KAWASAKI KLX650SR, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, KAWASAKI Ninja ZX-6R (ZX636), HONDA NM4-01, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC750S
lool nice and strong
I repalced DID 520ZVM-X gold joint link for black on my Suzuki Hayabusa 1300R. With the DID KM500R toolkit, it took me about 30 minutes to complete, it look nice and strong. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
First DensoPlug
NGK had always been the supplier, so I replaced it with NGK for a trial.
It is not something that can be felt, but I think the starting performance is good.
We believe that Premium components have an added peace of mind fee that regular products do not have, so those who think they are Waste should not buy them.
I like the fact that Gap management is not required.
View detail
Fits: YAMAHA FZR400, YAMAHA ZEAL, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA FZR250, YAMAHA TT225, YAMAHA TT225, YAMAHA TW200, YAMAHA TT-R250, YAMAHA TDM850, YAMAHA SRX600, YAMAHA FZR400, YAMAHA SRX400, YAMAHA TDR250, YAMAHA 350R, YAMAHA DRAGSTAR250, YAMAHA XTZ750 SUPERTENERE, YAMAHA SEROW225, YAMAHA XJ600, YAMAHA VIRAGO250(XV250)
3XV Regulator Replacement
[How is it used?
Rather new TZr250R (3XV) I bought it because the Battery of the "I" had gone to the point of non-rechargeable after about 2 weeks and I thought, ah, Regulator.
Other symptoms were that YPVS was acting suspiciously even after changing the Battery and that the voltage was not stable during Idling.
I was worried about the quality of Chinese products, so I decided not to buy one. I tried to replace it with one made by Yamaha in Taiwan, but the price had gone up so much that it was more expensive than I had heard, so I chose this product.
Was the one you received as per Image?
This product comes with Heat sink as shown in the photo.
Was the installation difficult?
The 3XV regulator is visible from the outside, but the right side bolt position is directly in front of the suspension, so the work area is quite small.
As long as that Bolt can be replaced quickly, the work can be done in about 5-10 minutes.
I got some impressions that the Bolt was not long enough, so I decided to use the YamahaOEM 30mm Bolt. (95027-06030) separately in theQuantity:I bought 2pc
How was your experience with it?
By using this product, the electrical problems that had previously appeared were eliminated.
It has only been a little while since the replacement so it remains to be seen how long it will last, but so far I am satisfied.
[Included Parts:were they on?
This product only.
Bolt for installation should be prepared separately with a 30mm bolt.
[Was there anything that disappointed you?
Currently, there are no complaints.
【Review】
Chinese products are scary, Taiwanese Yamaha OEMs are expensive, and this product is somewhere in between.
I am satisfied that the problems I had felt before have been resolved.
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
Batch!
It's helpful because I don't have to search for part numbers myself. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
This is the first time I have chosen DENSO.
I have been using NGK for a long time, but this is the first time I tried DENSO.
The advantage of Iridium plugs is that they do not require Gap Management, so they can be installed right out of the box.
Plugs are consumables, so we were not stingy in replacing them.
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KDX200 SR, KAWASAKI KDX250, SUZUKI SKYWAVE 400, SUZUKI TS125 HUSTLER, YAMAHA DT230 LANZA, KAWASAKI KLX140, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, YAMAHA TT250 R, HONDA REBEL 125, TRIUMPH SCRAMBLER, TRIUMPH SPEED MASTER, TRIUMPH SPEED MASTER 800, TRIUMPH THRUXTON900, TRIUMPH TIGER, TRIUMPH TIGER 900, TRIUMPH TRIDENT 900, YAMAHA WR200R
I had never considered RearPad in depth!
DownshiftEngine braking is used to enter the Corner, so I don't use the Rear brake as much, but it is best to feel the Touch-fee Ring and braking sensation when it is needed. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
NGK Iridium Spark Plugs for Honda CBX125 1993
A friend wanted an iridium plug for their CBX125 and Webike was the place to get it. This was easy to find using the tools provided by Webike and all the links to the manufacturers websites. They had previously had an iridium installed and wanted to keep to the one they are used to. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The plug arrived in 100% perfect condition. Fired on test and then fitted to the bike. This now makes the bike run as it should and no more bogging down and getting misfires. Very pleased with the result from this plug change. Thank you Webike View detail
Fits: YAMAHA FZR400, YAMAHA ZEAL, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA FZR250, YAMAHA TT225, YAMAHA TT225, YAMAHA TW200, YAMAHA TT-R250, YAMAHA TDM850, YAMAHA SRX600, YAMAHA FZR400, YAMAHA SRX400, YAMAHA TDR250, YAMAHA 350R, YAMAHA DRAGSTAR250, YAMAHA XTZ750 SUPERTENERE, YAMAHA SEROW225, YAMAHA XJ600, YAMAHA VIRAGO250(XV250)
Long Bolt required to change from 47X system
Compared to the 47X series regulator, the thickness of the bolt threading area has increased, so a longer bolt is required.
If it is YAMAHAOEM, M6 Bolt of 95027-06025 was attached perfectly.
However, this regulator requires a body ground, but the important body was painted and had no continuity, so the paint was removed from the parts that contact the bolt and frame to make continuity.
I think MAX 14.5V with Light lighting is quite good.
View detail