Reviews
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
Not that I'm complaining.
I have not tried riding without the rubber, but I think it is a good solution if you remove the rubber. Also, the quality of the product is good, and compared to Chromoly products, the Material:I think it's also good that Parenthesis is made of aluminum, and as a footpeg, it's quite wide, so I felt it's good that my feet don't get tired easily. View detail
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
I put it on ADV160.
I installed it on an ADV160, although it is not a fit.
It is attached by simply extending the Bolt hole to 8mm.
Horns are located in places where you have to look closely to see them, so it is a good Accent, albeit a self-satisfying one.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Fits: HONDA Africa Twin, HONDA Africa Twin DCT
It doesn't match the shape of the Tank.
[How is it used?
I jumped at the chance to change the Image of the Tank because it is a USAHondaOEM and Sale price.
Was the one you received as per Image?
Hadrill said, there was a feeling of being unsold, and the Body's Rubber was White.
Was the installation difficult?
I did the pasting process while looking at the sample photo, but the Tank shape is not correct.
I pasted it anyway, but the Tank shape is different from the one in the sample photo.
[Was there anything that disappointed you?
CRF1000LAfrica Twin in 2018, is it a different model?
This time, I feel like I am out of the loop.
View detail
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
520Conversion
Conversion520 from 530. It is easier to push and move. View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Good part
Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF1000L, HONDA CRF1100L
The texture is perfect!
Installed on MD47.
For long touring, put a rubber on it to prevent vibration.
Remove and use on forest roads.
Can be changed according to the type of Sole of Poots.
I have been waiting for a product like this.
Good choice of colors!
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
I can't install it on my bike jb03
The quality is well made It's jb03 about the feeling of use, and I bought it after seeing it installed on YouTube, but I couldn't find it Cost performance and comparison to other products Kitako products are easy to distribute, but the headlights may not close Delivery and packaging to WeBike in a week The packaging is great Concerns when purchasing Please check the jack and purchase it. I looked all over the line but couldn't see it View detail
Fits: HONDA VFR800, HONDA VFR800X Cross Runner, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR250RR(2017-), HONDA CBR500R, HONDA CB500X, HONDA Rebel300
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
520Conversion
I was able to Conversion from 530 to 520. View detail
Cover for honda shadow 750 phantom
Good morning. The cover arrived in its original packaging and fits perfectly on the motorcycle. The rubber isn't cracked, indicating it's made of good material. There were no issues with the installation. View detail