Reviews
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA DIO, HONDA LEAD, HONDA DAX, HONDA PCX, HONDA MONKEY, HONDA C110, HONDA GIORNO, HONDA DIO CHESTA, HONDA GORILLA, HONDA TODAY, HONDA CRF50F, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA SUPER CUB70
12209GB4682
I decided to carry out deep maintenance on my Honda Monkey, for which I needed oil-removable valve caps. I was very happy when I was able to find the original. There were no problems with the installation, externally the dimensions are the same as those installed from the factory, they differ only in color. There were no problems during installation. At the moment, everything is working without comments. View detail
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
I wasn't expecting it.
I bought this as a rear shock for my old Scooter.
The Machine is Honda's first LEAD80.
Thank you very much
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: HONDA DIOSR, HONDA DIO, HONDA TACT BASIC, HONDA ZOOMER, HONDA SMART・DIO Z4, HONDA SMART・DIO, HONDA STAND-UP TACT, HONDA SUPER DIOZX, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA GORILLA, HONDA CREA SCOOPY, HONDA QR50, HONDA BAJA, HONDA TODAY, HONDA TODAY DELUXE, HONDA CUB PRESS, HONDA MONKEY
No Impossible part
There is no part that is not possible as a Body Cover. View detail
Normal Mirror for mopeds.
ThirdMotorcycle's Today Mirror snapped off and I had to replace it. Very easy to read! Reasonably priced! … Too bad the Week Point is a little cheaply made…. "luxury" This is not for those who are looking for the best Mirror for their feet, but it is the best Mirror to wear on a foot scooter! View detail
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
Repair is completed at a low cost!
Installed on ThirdMotorcycle's Today that goes to the nearby Convenience, replacing an OEM OEMRear Suspension that had been scuffed up and deteriorated. The price is very low, but I have had no problems with it! I am Large satisfied with the low price and the refresh! View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Fits: SUZUKI ADDRESS V50, YAMAHA Remote controller jog, YAMAHA TOWN MATE80, YAMAHA MATE NEWS 50, YAMAHA JOG TRUNKSpec., YAMAHA SUPER JOGZ, YAMAHA MATE, YAMAHA JOG SPORTS90, YAMAHA JOGSporty, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA AxisTrunkSpec., YAMAHA JOG, YAMAHA Vino, YAMAHA YB50, YAMAHA Axis, YAMAHA PW50, YAMAHA V80MATE50, YAMAHA V80MATE80
Very good for occasional motorcycle rides!
Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.
The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.
Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while.
View detail
Quantity with high grip tire because it works well.:Set Exchange is a Recommendation
It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.
The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)
I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Anyway, it's a cosmetic!
I don't know about durability, but I chose it for its cosmetic value. View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA DIO, HONDA LEAD, HONDA DAX, HONDA PCX, HONDA MONKEY, HONDA C110, HONDA GIORNO, HONDA DIO CHESTA, HONDA GORILLA, HONDA TODAY, HONDA CRF50F, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA SUPER CUB70
Low profile parts...a blind spot.
The circumstances of the exchange,
It seems like the oil is getting low ? There is a lot of white smoke coming out of the exhaust system. I can understand if it is right after starting the engine in winter, but the white smoke doesn't disappear even after the engine is warmed up.
[Symptoms of Oil drop]
▲ BlueWhite smoke is emitted when Engine RPM is low.
▲When the Engine is stopped for a while and then started, White smoke is produced.
White smoke is produced when the Engine speed is increased after Idling for a while. 。
→ This is exactly what it is.
[Cause of Oil drop.
‥
(1) Valve wear
Damage due to age-related deterioration
Expansion and contraction due to temperature change
Deterioration due to dirty engine oil
→?Hardening of Stem Seal Suspect damage due to age-related deterioration.
Because... Stem seals are rubber, and I thought they would deteriorate (laughs).
Valve stem seal
The Valve stem seal is attached to the valve guide in the engine head and prevents engine oil supplied to the head from flowing into the combustion chamber through the sliding surfaces of the valve stem and guide.
Valve stem seal inside the cylinder head.
[Deterioration over time].
→Valve stem seal will not adhere to Valve Stem over time 。 When the oil level drops, the consumption of oil increases, resulting in poor engine performance due to lack of oil, abnormal noise, and in some cases, overheating and seizure.
White smoke and odd odors also appear, the first symptom listed. →That's what this is (laughs).
This replacement is an OEM Stem Seal.
procedure
First, remove the Dynamo cover to expose the Flywheel. Similarly, remove the side cover of the Cylinder head.
(2) Align the notch on the Crankcase with the top dead center mark (T) of the Flywheel and the 0Mark of the Camshaft Sprocket with the notch on the Cylinder head.
If it is difficult to match the tensioners, remove the bolt that is holding the tensioner tension of the camshaft chain tensioner and bleed off the hydraulic pressure.
Remove the locker arm, remove the camshaft, remove the valve spring using a valve spring compressor, remove the stem seal, and replace it with a new one. 。 After installation, use the Thickness Gauge and Tappet Adjust Wrench to return the Tappet clearance to the proper setting.
(5) Assemble the unit in the reverse order of disassembly. Finally, the amount of oil is checked and replenished before starting.
Effect after replacement
......White smoke has disappeared and the exhaust Gas smell has been eliminated!
It is not a part that comes out from the outside, so it is not an easy part to replace, but please check it when you overhaul the Engine or Cylinder head.
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Fits: HONDA Super Cub 50, HONDA CUB PRESS, HONDA GYROX, HONDA LITTLE CUB, HONDA TODAY, HONDA ZOOMERX
Halogen is still active
I have tried many things, including external with Color and Valve, but the OEM Halogen light is the easiest to use and I returned it.
Nowadays, LEDs are used in new cars, and Halogen light is still old-fashioned, like the Image of old.
But when I looked into it, I realized that it is quite practical.
The first time the project was completed, the project was completed.
Halogen light
A type of white light bulb that generates heat by passing an electric current through a tungsten filament (resistance) and emits light by blackbody radiation due to high temperatures of up to 3,000 degrees Celsius. 。 The difference is that Halogen gas is sealed inside the valve in addition to inert gas.
Features,
Smaller in size than white light bulbs
● Light is stronger than white-hot bulbs, and gets considerably hotter.
It is used in situations that require spot light intensity, and is also used in Stage lighting due to its strong light emission. 。 In addition, the brightness and color temperature rarely change while the power is on and the lights are turned on.
→Easily adopted for Motorcycle and Car headlights.
Advantages of Halogen bulb
Long life. →.
In a white light bulb, Tungsten, which is the filament, evaporates and becomes thinner as it is used, and at the same time, the evaporated Tungsten adheres to the glass surface called Valve and turns black, resulting in a decrease in illumination. 。 In contrast, Halogen bulbs have a longer life than white-hot bulbs because evaporated Tungsten returns to TungstenFilament by HalogenCycle using Halogen gas added in the Valve.
2) High brightness →.
Superior heat resistance and higher temperatures than typical White Heat bulbs, allowing for higher voltage and higher luminance 。
(3) High heat and shock resistance→.
Quartz glass is used in the valve to handle high temperatures. Quartz glass is made from quartz and is characterized by its excellent heat resistance, impact resistance, and transparency. 。 As for heat resistance, thermal expansion is very small, making it resistant to sudden changes in temperature.
[Characteristics
Halogen light is inexpensive and has good transparency.
The brightness of halogen bulbs is inferior to HIDs and LEDs, Soft luminescence that does not dazzle when looked directly at." features.
Halogen light is more transparent and easier to be detected by others when it rains heavily. However, Halogen bulbs do not illuminate the road surface more than necessary, so there is a Merit that allows driving with sufficient visibility even in the rain.
Halogen will always pass the safety standards required for vehicle inspections, etc.
OEMs are required to meet safety standards, etc. [Color] I decided to try Halogen light, which is used by OEMs if you are going to buy it, since it is shipped in a CLEAR condition.
I was also convinced that practical cars with Halogen attached are still working in the market.
good point
Easy to drive at night. ◎Easy to drive at night.
◎No reflection of the road surface.
◎Visibility there even in bad weather.
◎Low cost. ◎Low cost, yet meets safety standards.
◎Bulbs are hard to burn out.
◎Do not bother the car in front of you or oncoming traffic.
A bad point
▲Image is often viewed with the prejudice that it was a long time ago.
Halogen head lamps are inexpensive to purchase and easy to replace.
The disadvantage is that the brightness is weaker than DischargeHead lamps and LEDHead lamps, but there are many Merits to continue using them in terms of safety standards, cost performance, and convenience.
View detail