Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
Chain assembly
The chain was stretched, so I cut it and used it for reassembly.
Installation does not seem to be that difficult since it is a Clip.
View detail
Purchase Repeat
I bought Repeat because I used it before on my LITTLE CUB and it worked well. View detail
Fits: HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA NSRmini, HONDA NS-1, HONDA MBX50, HONDA CRM80, HONDA CRM50, HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS50F
Overhaul
I bought this because I wanted to build parts that would improve the performance of the engine overhaul of my NSR50. The assembly is a bit large since there is some press fitting work to be done. I don't have a hydraulic press, so I'm planning to challenge with Vise.
I don't know when I will be able to ride it, but I am looking forward to it.
View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS-1, HONDA NS50F, HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA MBX50, HONDA CRM80, HONDA CRM50, HONDA NSR75, HONDA NSR80, HONDA NSR50, HONDA NS-1, HONDA NS50F, HONDA MTX80, HONDA MTX50, HONDA MBX80, HONDA MBX50
About MechanicalSeal
Thank you for your prompt response.
I put it together as soon as it arrived. 。 Water leak cured.
I guess it's hard if you don't have a certain amount of knowledge. ??
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
For MTX200RII
The rear brake of MTX200RII was extremely ineffective, so I checked it and found that it was the same shoe as the CUB, so I replaced it immediately. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
Very Controllable
Square eye CUB90Custom HA02-180 Used on Rear side
I think it's better than OEM.
Unlike the ones that work with gusto, they seem to be less aggressive to Case.
Before installation, the corner (Cad) (This was also mentioned on the back of the Package). If you do not do this, you can install it quickly and easily. It doesn't work well at first, so be careful." When you get out of the motorcycle shop, you are on a public road.
Do not forget to grease up the moving shafts and degrease the surfaces (with parts cleaner). Even just touching the surfaces can affect their effectiveness.
People who do the Exchange Challenge by themselves should not pull the Spring by force, but the shell. (Or should I say books?) It is surprisingly easy to attach and detach the device using the principle of leverage, just like closing and opening the
When you remove the → book, close it.
When installing the book, hold the book half-closed and open the book by clamping the shaft.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA TLR200, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NSR50, HONDA NSR80, HONDA Super Cub 50, HONDA Super Cub 90, HONDA monkey
Normal is best
It is a standard product that is neither too much nor too little, and can be used with confidence. I haven't tried it yet, but when I replace the Valve, I almost always use this Valve. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
stability
DAYTONA's Blue Brake Shoe works well, but is highly aggressive.
We use this one.
I am satisfied with the overall balance.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
Non Fade Brake Shoe KITACO
Purchased for Honda Little Cub. The pads are excellent, good material. With the installation everything is fine, it went without problems. Unfortunately, it was not possible to make dynamic tests, but in general everything is fine! View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
It is inexpensive and Brake works well.
I replaced the front and rear of the LITTLE CUB at the same time. there is a groove on the Brake Shoe, so I think it works better. View detail
Fits: HONDA CB125, HONDA CD125., HONDA BENRY CD50, HONDA CD70 (Benly), HONDA Benly CD90, HONDA MT125 Elsinore, HONDA TLR250, HONDA XL125, HONDA XL125, HONDA XL125, HONDA XL200, HONDA XL250, HONDA XL250, HONDA XL250, HONDA XL400R, HONDA XLR250, HONDA CD125., KAWASAKI KL250, SUZUKI GN125, SUZUKI GN250E
Replace from LED
The LEDs look white and are clearly brighter than Halogen, but they seem to be incompatible with the headlight lens and the light seems to be diffused, making it very difficult to see on the road at night. The LEDs are highly visible to oncoming traffic, but DT's Material:Halogen light seems to be a better match for PlasticLens Headlight. The color is a gentle yellowish color, not bright at all! The color is a gentle yellowish color, but nothing more than this is Material:I guess there is a risk of melting PlasticLens with heat.
If we want more than this, we will have to port the XT250X Headlight Assy and use the H4 Valve, so we will wait and see.
View detail
Fits: KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA NSR50, HONDA TLM50, SUZUKI TS50W, HONDA C50 SUPER CUB 50 Custom, HONDA BENLY90S, HONDA ATC70, HONDA APE100 TypeD, HONDA APE100, HONDA CF50 CHALY, HONDA CF50 CHALY, HONDA CD90, HONDA CD90, HONDA CD50
DID chain link
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: 420D_G&B-RJ, manufacturer DID.
The DID chain link was bought in gold color to stand out on the chain. Everything went well. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article details: 420d_g & b-rj, manufacturer DID. The connecting link in the DID chain bought a gold color to stand out on the chain. Everything came well. Powered by Google Translator"
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
Brake pads
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: 770-1087030, manufacturer KITACO.
The quality of the pads is top notch. I ordered 2 sets at once - for the front and for the back. There are instructions, but they are there easy to install.
-------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details: 770-1087030, manufacturer Kitaco. The quality of the pads is on top. I ordered 2 sets at once - on the front and on the ass. There is an instruction, but they are easy to install there. Powered by Google Translator"
View detail
Fits: HONDA MTX50/R, HONDA MTX80R, HONDA TLM50, HONDA XL50, HONDA XL80, HONDA XLR80, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA XR70R, HONDA XR80, HONDA Z50R, HONDA XR75 73-13, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA CRF110F, HONDA CR80R/RII
COSPA
I recently purchased a CRM80 and the Chain was not working so I replaced the front and rear Sprocket and Chain.
The DRC stuff is very cosmetic.
I may change it again, but I decided to use the same number of teeth as the OEM, 15T.
View detail