Reviews
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
LITTLE CUB 75cc with 15T installed
Bore up the LITTLE CUB to 75cc to increase the maximum speed.
Purchased
Bore Up Kit + High Camshaft + Big carburetor from the same KITACO
Tuning was done with the same manufacturer's products, so FrontSprocket also
As soon as I chose it.
It has the same texture as OEM, but is also processed without meat, so it has the same number of teeth.
Is the weight reduction offsetting the increase in
Although only one gun was raised in the OEM ratio (14T), the connection between each GEAR
The balance between Torque and maximum speed is just right even in the city.
I felt that
The number of chain tops is not changed, and the same number of pieces as the OEM is used.
(However, the adjustment with Chain Adjuster is
(Required).
If the vehicle is an 88cc or a vehicle that has been modified up to the engine head, you can use a few more pins.
It might be a good idea to raise it.
I have used KITACO Sprocket in the past for durability.
It is safe to use.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
You can feel the increased power.
Installed with Mukawa Hyper Ignition Coil.
I don't know which helped, but it clearly increased power.
Even uphill climbs, which used to be tough, are now a breeze.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
Easy to ride, which seems to be a good standard for CUB.
I replaced it to prevent too strong embrittlement and vibration. it is so easy to ride that it looks good even as a standard of CUB110. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
I love it, it’s fit to my bike and I will buy more takegawa items again
My friends needs to buy here View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Replaced because it was worn out.
I used to use Rear 36T, but I couldn't climb uphill, so I switched to Front 14T.
I was inspecting and servicing the car when it started running and it was very worn out, so I replaced it. The last time I replaced it was with another manufacturer, but I replaced it after 7000 km.
It is not very expensive, so you can easily exchange it.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Light and affordable
The enclosed fixing pin is weak, so it is better to use a genuine pin. It is lighter than genuine sprocket, so it looks good and looks good. View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
Refresh from OEM Sprocket
[How is it used?
I had been using OEM Sprocket for a long time and replaced it at the same time as Chain.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Remove the drive sprocket cover and loosen the Chain Adjuster adjustment nut to loosen the chain.
After that, Quantity fixing Sprocket while straddling the Machine and stepping on the Rear brake.:Simply loosen the 2pc Bolt and replace it with the original Sprocket.
How was your experience with it?
No particular change.
It may not have been that worn out, but you should do it for mental health reasons when you exchange Chains.
[Included Parts:were they on?
Flange for fixation
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
Used in MONKEY
Used on a MONKEY 88?. lucky to get it at a low price on Sale.
The quality is safe because it is SUNSTAR.
View detail
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
Used in MONKEY
I'm lucky to have changed it at a low price with Sale.
The quality is safe because it is SUNSTAR.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
KITACODriven Sprocket
Made by KITACO, so moving parts can be replaced with confidence. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
It's quite useful.
Ideal for loading soft bags.
Is it up to 25 LClass in terms of capacity?
*In case you are wondering, I am using a 30L Waterproof Bag.
I have read other impressions about problems with BALI, installation, etc., but I guess it's an individual difference. I checked the entire unit and did not find any BALI.
Satisfied with the quality and price.
It would be a necessity for commuting and Touring.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
KITACO Drive Sprocket (Front) 530-1010216
Used for square eye CUB90 HA02-180.
Changed from OEM 15T to 16T (toward High Speed Oriented). 1T on the Front is said to have an effect equivalent to 3T on the Rear.
Unavailable low is now easier to use.
In particular, UTurn is now easier, and the normal mode requires the driver to shift from low to second gear during UTurn, but now the driver can turn without changing.
There is no Torque drop on uphill slopes (there is a little bit. (There is a little bit of Torque drop, but I had to drop to 2nd gear when I could have gone in 3rd gear before).
Starting in second gear is a bit dull.
I don't charge up to the maximum speed in town because the acceleration in 3rd gear from 2nd gear is so barrel that you will either get caught or swerve before you reach the maximum speed. Of course, I will obey the speed limit.
However, it is much easier to ride than NORMAL, and I feel a sense of security due to the drop in Engine RPMs at high speed cruising, so I am glad. 。 Of course I will obey the speed limit.
While changing the chain, I am thinking of raising the OEMDriven (Rear) 39T by 1T to gain a little Torque.
Chain link number 99 in the calculation for 16-40T,, in this case is it safe to choose 100?
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
Very Controllable
Square eye CUB90Custom HA02-180 Used on Rear side
I think it's better than OEM.
Unlike the ones that work with gusto, they seem to be less aggressive to Case.
Before installation, the corner (Cad) (This was also mentioned on the back of the Package). If you do not do this, you can install it quickly and easily. It doesn't work well at first, so be careful." When you get out of the motorcycle shop, you are on a public road.
Do not forget to grease up the moving shafts and degrease the surfaces (with parts cleaner). Even just touching the surfaces can affect their effectiveness.
People who do the Exchange Challenge by themselves should not pull the Spring by force, but the shell. (Or should I say books?) It is surprisingly easy to attach and detach the device using the principle of leverage, just like closing and opening the
When you remove the → book, close it.
When installing the book, hold the book half-closed and open the book by clamping the shaft.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50 60th Anniversary, HONDA Super Cub 50 PRO, HONDA SUPER CUB 90Custom, HONDA SUPER CUBC125, HONDA SUPER CUB70Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50 "Weather Child" Ver., HONDA SUPER CUB 50 STREET, HONDA SUPER CUB110PRO, HONDA SUPER CUB110 STREET, HONDA SUPER CUB110 "Weather Child" Ver., HONDA SUPER CUB110 60th Anniversary, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB50 Kumamon VERSION, HONDA CROSS CUB50, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
short
Shorter than NORMAL, so foot placement is not comfortable. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
Fits: HONDA MONKEY125, HONDA NSF100, HONDA SUPER CUB110, HONDA SUPERCUB C125, HONDA Ape100 Deluxe, HONDA Ape100 Type-D, HONDA Ape50, HONDA Ape50 Type-D, HONDA BENLY 50S, HONDA BENLY 90S, HONDA BENLY CL50, HONDA BENLYCD50, HONDA CRF80F, HONDA CRM50, HONDA CRM80, HONDA CROSS CUB110, HONDA DAX, HONDA DAX HONDA ST70, HONDA DAX ST50, HONDA DAX ST50
It doesn't engage.
The holes in the Sprocket did not mesh with the holes in the fixed Plate. View detail
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
Sunstar front sprocket
As per manufacturer, sprocket material able to last above 10000km & more. Pricing was reasonable for good material used.Have not install yet, will see how it goes & revert later on. View detail
Fits: HARLEY-DAVIDSON FXDC, HONDA XL100 A, HARLEY-DAVIDSON FXDWG, HARLEY-DAVIDSON FXST, HARLEY-DAVIDSON FXDB, HARLEY-DAVIDSON FXS, HONDA SUPER CUB 50 60th Anniversary, HARLEY-DAVIDSON FLSTC, HARLEY-DAVIDSON FLTRI, HARLEY-DAVIDSON XLH883H, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XLH883, HONDA XL80, HARLEY-DAVIDSON XL883C, HONDA XL75, HARLEY-DAVIDSON FLSTS, HARLEY-DAVIDSON XL50, HONDA XL70 A, HONDA XL250, HONDA XL200
Ideal for Rust concealment
There is Rust on the Spoke and it is coming dull even though it is clean. 。 It is inevitable because of age-related deterioration commensurate with the age of the car. 。 We purchased it in the hope that it would look a little better. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Self-delivery car maintenance.
I purchased an APE 100, but it was tired in many ways, so I replaced the drivetrain with a new one in the Self delivery service.
Drive1TUp Driven1TDown.
The Chain, which was no good, has been renewed, so the acceleration has improved.
Also, it's cheap, which helps.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Larger Front Sprocket was needed for the 181cc BBK on the Grom
About quality and texture: I am happy with the quality of the front sprocket from Kitaco. The 16 tooth 420 pitch front sprocket is manufactured from high carbon steel with lightning holes. About the feeling of use: The main reason I removed the OEM Honda front sprocket was to increase the size of the front sprocket to help lower the RPM of the 181cc BBK when crusing at high speed and as a bonus of the lighter weight helps with performance. Products to buy together: A larger sprocket guard plate would also be desirable to purchase alongside the front sprocket for additional clearance when using a larger front sprocket. Difficulty of installation: The process to install takes about 15 minutes. Remove the sprocket cover and back off the chain tension. Remove the two bolts that hold the locking plate and then remove the sprocket. Install the new sprocket, secure the locking plate and make a chain adjustment. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a front sprocket made from a durable material and designed with the best performance in mind at a great price as compared to the basic styled front sprockets from the other bands and non as cheap in the 16 tooth size. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to swap front sprockets for a change in tooth size then inspect your current driven sprocket and drive chain to see if they will be suitable to use with your new front sprocket and if not then purchase all three parts together. View detail