Reviews
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
Safe and Secure OEM Parts
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This product is Oil seal on Crankshaft/Alternator side. (Crank seal?) to
When this Seal comes loose, 2ndOil leaks from the Crank to the Alternator side.
Although there was no leakage during the O/H this time, it was replaced as a preventive measure.
How was your experience with it?
OEM Parts is the only choice for Engine parts.
There is no problem with quality. Since it is press-fitted, it requires a hang to pull it out of the crank. In my case, I lightly drilled a hole with a drill, screwed in the bolt, and pulled it out with pliers.
When hammering, the amount of hammering was carefully measured with Caliper using Socket.
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
Be careful not to hit too hard or too supple.
If it doesn't leak, it doesn't matter...
View detail
I'm too weak.
It was distorted when I fell and hit it.
With OEM, this didn't happen even if you hit it hard..,
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
The XG250 TRICKER has a slightly smaller take-up diameter than the OEM.
Purchased for installation of hand guard to be fixed to Bar End.
I installed it on my XG250 TRICKER and the take-up diameter is a little smaller than OEM.
I felt no discomfort when I rode it.
It was easy to open end for now, so that was helpful.
View detail
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Fits: HONDA CRF150R, YAMAHA YZ85, HONDA CR85
Replacement from NORMAL
I am new to On road only,
I am satisfied with the Large position and appearance, although the Top Bridge was also replaced at the same time. I think it was good for me, who has short arms, to have a comfortable posture. I can't say for sure because there are differences in body shape among individuals, but I am glad I bought it.
View detail
Aiming to strengthen BootsGrip
I replaced it after 2ST because my body was slow and my feet were often separated from the footpeg. It is good that my feet don't come off the footpeg anymore, but it would have been nice if the footpeg had more grip. It's not bad, but I would consider other products. View detail
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Fits: KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, YAMAHA Lanza (DT230), YAMAHA TT-R125, YAMAHA TW200, YAMAHA CELLOW 225, YAMAHA XT250X, YAMAHA YZ80, YAMAHA YZ85, YAMAHA Cerro 250, YAMAHA tricker
Rigidity is as expected
The texture and rigidity are both good. The handlebar brace is almost invisible (laugh). View detail
Fits: YAMAHA BRONCO, GASGAS PAMPERA250125, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA SEROW225, YAMAHA XT250X, YAMAHA XTZ125E, YAMAHA TW225E, YAMAHA TW200, YAMAHA TW200E, YAMAHA TT-R125LW, YAMAHA DT50, SUZUKI GRASS TRACKER, KAWASAKI KLX125, HONDA XR50 MOTARD, HONDA XR230, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA TLM220R
ExactlyFit
It is nice to have a Belt that can be fixed to the Center.
It is also very good that the front wheel side can be squeezed.
View detail
Huge upgrade over stock pegs,Excellent quality and Wide sturdy grip.
Very solid footing with these and they have already withstood a couple of hard falls! Surprising what a difference these make compared to stock! Excellent pegs. Feels like a have a front porch worth of room for my feet to stand on, and they grip to the bottom of my boots like super glue. Easy to install and improved grip noticeably over stock foot pegs.I will say you may have to tweak your stock peg springs to fit around these monsters but still only took 10 min to install both. Great Product, Highly Recommend,webike too fast shipping View detail
Fits: BMW G450X, GASGAS EC, GASGAS MC, GASGAS XC, HONDA CR125, HONDA CR250, HONDA CR500, KAWASAKI KX125, KAWASAKI KX250, SUZUKI RM125, SUZUKI RM250, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X
Effective! But...
I put it on my YZ125X, which has a‘21 footpeg. The OEM product number I checked was the same part number for both the footpeg and base installation, so I figured it would fit.
Result is Normal position is OK, Low Position is footpeg stopper (Adjustment by putting Washer in Screw) The head of the base mounting screw? The head of the Screw on which the Base is mounted?
The footpeg is designed to tip up when the footpeg falls over, just like the OEM model, but the part where the spring hangs on the footpeg side hits the mounting screw on the base and only raises the footpeg a little bit. So, I used a grinder to shave off the upper part of the spring hanging point to increase the amount of tilt, but it still only goes up a little as shown in the photo.
Well, it is Universal's Made in USA product, so some modification is acceptable.
The effect when you ride it, however, is that it bites firmly to the foot! But there are no negatives of too much bite, and the best part is that it is easy to apply load on climbs!
I thought it was a bit expensive, but it was the right decision!
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
A standard product that does not break and is easy to grip
I have been using Lever for a long time.
The product's ability to expand large in the opposite direction, which is a selling point of this product, makes it less prone to breakage, but it also has a different bend at the point where the fingers are applied compared to the OEM Product, making it more angular.
In the OEM model, the entire area where the finger rests on the Grip is covered with R, which makes the finger position unstable and leads to a difficult and fatiguing grip.
The 4-finger design also reduces the amount of force required, making it easier to respond to various situations, and I think this product will make you feel that you are able to ride better.
Compared to the OEM, it opens slightly outward due to the mounting point, but by closing the screws on the inside, it can be brought slightly inward from the OEM position.
There is no outward curvature from the middle, so if it is just the gripping area, the termination is inward from the OEM.
The installation can be replaced without any modification for the common Screws, and the Cover can be installed without modification as well.
Comparison images are attached for your reference for purchase.
View detail
Rather essential equipment
Equipped with air vent of 13mm height
This is the first time for us to use this product because the product we used to use was not available.
I was concerned about interference with the surrounding area due to the gap between the suspension and handlebar and the ease of hitting the handlebar when it tipped over, but I decided to purchase a short.
As you can see in the photo, the height is about 13.5mm when installed, so almost the entire line fits inside the screw of the fork cap, so there is little risk of damage.
Air venting performance also seems to be fine, as the air seems to be coming out without blowing any oil.
One point of improvement is that it cannot be rotated by Driver, etc., so it is difficult to detach and reattach.
The low Body height also affects it and makes it difficult to pick even by hand, so you may want to be concerned about this point.
(Although it is possible to grip the groove with pliers, it is not recommended because the screw part and other parts are not strong enough.)
View detail
KIJIMAGrip heaterGH08Push Switch
It's been about two weeks since I installed it and so far no problems.
The Grip is a little thicker than I expected, but it is just right for me. I was thinking that I would mishandle the Switch if I used the type attached to the Grip, so I chose this type, and it was the right choice. It is easy to operate and I feel it is convenient to attach it anywhere I want. Also, my palms are quite warm if it is 4 degrees Celsius in the morning and the temperature is at the maximum. But only my fingertips are hard to keep warm. If you want to keep it on all the time, I think the 3rd or 4th of 5 levels would be best. I think the 3rd or 4th out of 5 levels would be best if you want to wear it all the time.
Electrothermal Gloves or Inner Electrothermal Gloves (You will need to bring your own Gloves separately) Would it be good to have a And.
With the skin Gloves with boa, the palms will feel sweaty.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail