Reviews
Above the waistMaintenance to Stock
[How is it used?
Used for Piston installation
Was the one you received as per Image?
The product arrived exactly as shown in the product image, so no problem!
Was the installation difficult?
By far the easiest installation compared to the C-shaped Clip.
How was your experience with it?
I found it very easy to use.
Installation Point
Piston Pin side has a front and back side so that the protruding part does not hit the pin side, so do not make a mistake.
There is also an upper and lower level, so once you do the installation, you will learn it.
View detail
Fits: SUZUKI ADDRESSV100 [ADDRESS] (for CE13A only) (also compatible with CE11A-500001-), SUZUKI ADDRESSV100 [ADDRESS] (for CE13A only) (also compatible with CE11A-500001-)
Performance V100 exhaust from Chameleon Factory
Chameleon Factory chamber for V100 always the best. The welding quality aslo great! About the feeling of use after 2 years are really satisfied for performance and material quality! Last time I bought together with Chameleon belting and clutch bell. The installation is super easy. Only need to tuned the roller according to the bike. Performance increase the to speed! Really add on the power! Recommended for this chamber for upgrade your scooter speed! View detail
Fits: HONDA Super DIO [DIO] ZX, HONDA Super DIO [Dio] SR, HONDA Super DIO [Dio]., HONDA G DASH [Dash]., HONDA DJ-1 RR, HONDA DIO [Dio] SR, HONDA DIO [Dio] SP, HONDA DIO [Dio]., HONDA Super DIO [DIO] ZX, HONDA Super DIO [Dio] SR, HONDA Super DIO [Dio]., HONDA G DASH [Dash]., HONDA DJ-1 RR, HONDA DIO [Dio] SR, HONDA DIO [Dio] SP, HONDA DIO [Dio].
Mounted on dio af27
I liked the design and bought it
Just checking for exhaust leakage, but it is a bit high.
It sounds like a 2-stroke.
The performance of the carburetor is still to be determined, and since the air cleaner has also been changed, we will see how it goes with the 2nd UP.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA MAJESTY125 [Majesty]., YAMAHA BWS125, YAMAHA BWS125
Used for cuxi100
Motorcycle's initial response is fine.
I rode it for about 20 minutes and when I tried to restart it, Engine would not start.
Battery and Plug are fine.
After a while, Engine takes over.
For about 2 years without knowing the cause.
The cause was the fuel pump. It seems that when the Fuel Pump gets hot, it stops working.
Normally, when the power comes on. Whee!" and fuel pump sounds. However, it does not when it is hot.
However, if I buy these Parts and take them to a Motorcycle shop, they refuse to accept them. It seems that the entire Assembly with the fuel pump will be replaced.
It seems that you have to ask a motorcycle shop that will repair the parts by rose, or you have to replace them yourself.
I too have done a lot of searching and was helped by Review, blogs, and other articles, so I leave you with this Review.
View detail
Performs exactly as I imagined! (For better or worse.)
I diverted it to LETS II. pitchetc. it is exactly the same, so it will arrive as is. I also checked the fuel condition and there was no problem.
I used to use a NORMAL CA1KA for commuting to school and sometimes Gymkhana, but it was getting to be not enough;
Something that is not too loud.
Fuel consumption does not need to be adjusted frequently.
Manufacturer with a good name recognition
I hate Sports Exhaust.
I was looking for a "good" product, and it was Exactly, so I bought it.
Pushing up like crazy. It's probably a little bit suspicious when it rains. The welding is like a high school student's "Kiai Manji". Please be assured that it is made by Chameleon factory including those parts. (Spec.)
I was turning it up to 7,200 with a pure muff OEM product and it was about 65-70, but with Paralyzer3, WR10×3, I turned it up to 8,500 and the LimitMeter reading was 80! (So it would be about 75~ in real terms. LOL) I was able to get to Circuit, of course.
I ran it with BT601SS front and rear, but the Fork on the LETS II was too weak to stop in the first place! The Ad V undercarriage should pon in from Stem, so I'm going to replace it with that one….
View detail
Although my address is stopped to the parking area in front of a station, a wound surely enters. A sticker is stuck as wound hiding at such time. Since the place containing a wound is also generally the same, it serves also as prevention of a crac
Although my address is stopped to the parking area in front of a station, a wound surely enters.
A sticker is stuck as wound hiding at such time.
Since the place containing a wound is also generally the same, it serves also as prevention of a crack entering again.
If it sticks also on the binder used at work, he will enjoy a lively motorcycle discourse.
it is good for adjustment when coming out to a slight degree and calling it mailing cost no charge etc.
View detail
Fits: HONDA Super DIO [DIO] ZX, HONDA Super DIO [Dio] SR, HONDA Super DIO [Dio]., HONDA G DASH [Dash]., HONDA DJ-1 RR, HONDA DIO [Dio] SR, HONDA DIO [Dio] SP, HONDA DIO [Dio]., HONDA Super DIO [DIO] ZX, HONDA Super DIO [Dio] SR, HONDA Super DIO [Dio]., HONDA G DASH [Dash]., HONDA DJ-1 RR, HONDA DIO [Dio] SR, HONDA DIO [Dio] SP, HONDA DIO [Dio].
Parenthesis is good
I am Large satisfied with the Race ish in both look and sound.
It seems to be compatible with bore up by adjusting Silencer's Wool, so I think it can be used in a wide range of applications!
View detail
Fits: YAMAHA CYGNUS X, YAMAHA MAJESTY125 [Majesty]., YAMAHA BWS125, YAMAHA BWS125
More reliable than OEM
It is used for CYGNUS X Type 2 Taiwan Spec.
The CYGNUS has a weak fuel pump in the 2nd and 3rd models, and it is basically necessary to replace it since it has a recall.
Fuel Pump's PRO Pella is Material:Since it is made of plastic, it can get stuck inside due to thermal expansion or deterioration, resulting in trouble when it cannot be turned.
I also had a problem once when I was on the road and my engine stopped working.
If I leave it for an hour or so and the thermal expansion stops, I can start it again, but once the symptom appears, it always recurs, so I replaced it with this product.
It seems that the OEM countermeasure is not perfect, and we have confirmed several occurrences in vehicles that have already been recalled.
Replacing the cowl is quite a large job because there is a lot of removal of the cowl and the frame is in the way, but once you get used to it, it only takes about an hour.
You can tell if this product has been assembled by listening to the sound of the fuel pump operating sound, which is quite large when the key is turned on.
I have been using it for over 3 years and it still performs consistently without Trouble.
The engine has been bored up and the injector has been changed to a large-capacity one, but I still feel a lack of fuel pressure and have not experienced any trouble.
I heard that the part number has changed due to minor changes in the past, so it's better to buy from a reliable place.
Since the failure of these parts can be fatal, we recommend that you use a reliable manufacturer, including this product, even if it is a bit expensive.
View detail
Fits: HONDA Live DIO [live dio] (mountable), HONDA Live DIO [LIVEDIO] ZX (can be installed), HONDA Live DIO [Live Dio] J (can be installed)
Nice resonator.
I use malossi sport + cdi daytona red with the cpg, the result suits me perfectly. Interesting configuration and design. I want to try the daytona cpg, I think it will be more interesting. -------------------------------------------------- -------- I use Malossi Sport + CDI DAYTONA RED from CPG, the result is quite suitable for me. Interesting configuration and design. I want to try the DAYTONA CPG, I think it will be more interesting. View detail
high capacity injector
thanks to this injector I could notice the difference at high revs it is a key product to configure the big 20% increase top View detail
Fits: SUZUKI ADDRESS110 [ADDRESS]., SUZUKI STREET MAGIC110 [Street Magic]., SUZUKI ADDRESS110 [ADDRESS]., SUZUKI STREET MAGIC110 [Street Magic].
CHAMELEON FACTORYReinforced Clutch Spring
Installed on the Normal clutch, the rotation of the Clutch is increased and the start is better.
The timings may become faster as time passes, perhaps due to heat dripping.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA MAJESTY125 [Majesty]., YAMAHA BWS125, YAMAHA BWS125
The installation was a bit Large strange.
I installed it on my WR125R.
I bought it because I was experiencing symptoms of the Pump not working on hot days when it was low on fuel.
Removing the OEMPump was a large oddity, once it was removed, the rest went easily.
It is the impression after the installation, the movement sound of Pump became loud, but there is no problem because it is the proof that it is moving well, and it was relieved because it was able to run normally in midsummer.
View detail
Fits: YAMAHA Super JOG [JOG] ZR, YAMAHA Remote control JOG [Jog] Z2, YAMAHA Remote control JOG [Jog] ZR, YAMAHA Remote control JOG [JOG]., YAMAHA Remote control JOG [Jog] Z2, YAMAHA Remote control JOG [Jog] ZR, YAMAHA Remote control JOG [JOG].
For Closed & Events
I was drawn to the video site where it played a distinctly race ish tone, so I bought it to try it out
As you can see in the accompanying image, Silencer's angle is a great thing ...
It's not a story by any means
It's a "Mitake Fee Ring", but the WR is half the weight of the current one:We changed the Clutch Spring to a harder one, and finally the acceleration is the same as NORMAL I'm not sure
In the high speed range, the MJ was confirmed at 2nd position, which was the case with my plane It feels like it's going into a band The sound was so great that I gave up the highest speed TRY and removed it the same day
It's only for closed and events, and we don't recommend using it for street use, but we understand that I would recommend it to anyone who is doing this, please give it a try
View detail
Fits: SUZUKI SEPIA [sepia]., SUZUKI STREETMAGIC [Street Magic] (LB), SUZUKI STREETMAGIC [ Street Magic ] (LA), SUZUKI SEPIA ZZ(CA1HC-172189-), SUZUKI SEPIA RS (CA1HB-111064-), SUZUKI LETS2 [LETS]., SUZUKI LETS [Lets]., SUZUKI STREETMAGIC [Street Magic] (LB), SUZUKI STREETMAGIC [ Street Magic ] (LA), SUZUKI SEPIA ZZ(CA1HC-172189-), SUZUKI SEPIA RS (CA1HB-111064-), SUZUKI LETS2 [LETS]., SUZUKI LETS [Lets].
I can't use it without it
Spring was the OEM for the Center Spring Slide Show Stem I can't use the first one, so I bought this one
As a result, the normal RPM range is higher, so you can run with Quickly
It's going to be a bit noisy, but …
View detail
Fits: SUZUKI ADDRESSV100 [ADDRESS] (for CE13A only) (also compatible with CE11A-500001-), SUZUKI ADDRESSV100 [ADDRESS] (for CE13A only) (also compatible with CE11A-500001-)
gooD
Great product , great service .easy to install, looks and sounds great.very good quality exhaust and fits nice onto the bike very happy with your item. 5 stars View detail
Fits: HONDA LEAD100 [Lead]., HONDA LEAD100 [Lead].
Sauce
I was excited from the moment I received it to purchase it at Good Image, and I was excited about the installation process..
The first thing that hits me is that Spring is hard!
I feel the same way about Spring hooks as the OEMs, but it's probably not going to happen
Quantity of Spring on Shoe:Set and hanghang with the plahan and little by little carefully ... Yes, the installation is finished
It's a quick test drive
Clutch connects with good Timing, not bad, not bad
It's changed to a fun ride
Summer was in full swing at this time 。
And then fall came 。 Oh, doesn't that seem normal?
Yes, a little bit of Spring was Sauce
In this case, the OEMShoe was replaced with no lightweight machining and only the Spring
If you reduce the weight of the Shoe, Spring won't Sauce for a little longer, and
Even after Sauce, it's one TEMPO13 later than OEMSpring, and
This is not a bad idea
I still prefer this product with Sauce to the OEM's no-good start
I like it
The durability is good and it's the right parts to replace
View detail
Fits: YAMAHA Remote control JOG, YAMAHA Met-In ZR, YAMAHA Met Inn JOG, YAMAHA Grand AXIS, YAMAHA JOG90, YAMAHA AXIS 90, YAMAHA Remote control JOG, YAMAHA Met-In ZR, YAMAHA Met Inn JOG, YAMAHA Grand AXIS, YAMAHA JOG90, YAMAHA AXIS 90
Re-acceleration
It's much easier You can see that the Torque Camshaft is working properly without distortion When you put this on, because SenseP is hard even in OEM, Reinforcement Spring is not recommended
I don't know how durable it is, as I haven't been using it for a long time
View detail