Reviews
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
exchange
I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful.
View detail
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Chain assembly
The chain was stretched, so I cut it and used it for reassembly.
Installation does not seem to be that difficult since it is a Clip.
View detail
Replaced from heavily worn Plug
I had a symptom of poor cold start and ordered it with the intention of replacing it, no questions asked!
The work was completed without difficulty since it was a replacement for the same one in the OEM adopted Plug.
I removed it and compared it to a car with about 50,000 km on it, and I'm guessing that it has never been replaced.
The photo was taken without a second thought because of the amount of wear and tear.
After replacement, starting performance was clearly improved!
I reaffirmed the meaning of periodic replacement.
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Good pads!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
Purchase Repeat
I bought Repeat because I used it before on my LITTLE CUB and it worked well. View detail
winker lens
This is genuine parts form honda cd 125t . good qulity and super finishing.highly recomenderd for genuine honda lovers. View detail
It was Out to ask the weight.
Bore up CUB90 to 105cc.
Before the replacement, I had KITACO's F16T and R37 Ding. It gave me great acceleration and I was able to drive uphill very comfortably.
I recently test rode a CT110 HUNTER CUB with a previous rider. Unfortunately, his impression is that the acceleration is too strong and very difficult to use, and as a result, he does not enjoy it. There is a weight difference between riders, but it is only for me, so it is fine if only I can enjoy it. However, it is frustrating to hear this from someone who knows how to use the CUB. I was just reviewing the color of the axle line and decided to replace the RSprocket which is the same process.
I purchased the same KITACO as last time and the number of the pin is 36. The color is the same glossy black as last time and the Sprocket is included in the package. When I store the Sprocket after replacement, I use the package it came in to prevent the Chain oil from sticking to other things. This package is the most convenient when using multiple Sprockets, as long as you have time to clean the oil off each time.
If you are replacing it for the first time, be careful in removing the Sprocket from the Flange. Glasses Wrenchetc. may hit your hand on the sharp Sprocket the moment it is loosened because it is tightened quite hard. If possible, we recommend using a 14mm TWrench.
After the change, the acceleration was definitely reduced. However, the irregular timing has changed and the Change Pedal is easier to operate than before. I am not holding my upper body so strongly when starting, and my riding posture is better. The maximum speed has also changed, but I don't put much emphasis on it because I don't plan to use the speed on my CUB.
The calculated Sprocket ratio gives some idea of what to expect, but it is difficult to get an impression of what it is actually like to ride. Sprocket is a part that can be replaced to adjust acceleration and speed. The price of the parts to be replaced is low for this reason, which is helpful.
I will have the same person test drive it next month. I would like to make a decision in one shot to avoid being tipped off that I'm wasting my money.
View detail
Great sprocket
It feels good to be able to buy good products at a low price. As it is a consumable, you have to change it often, but since it is cheap, there is no burden at all, so you can change it to stock price. The quality is also excellent, so you can buy it with confidence. View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Product # 450-3021000
It was purchased for the Honda Super Cub to adjust the fuel mixture after installing the whale 75, size 85. Everything is great, I recommend it to everyone to purchase. Purchased for a Honda Super Cub to adjust the fuel mixture after installing kit 75, size 85. Everything is great, I recommend it to everyone for purchase. View detail
Hand Jet
It was purchased for the Honda Monkey to adjust the fuel mixture size 85. Everything worked out great, I recommend it to everyone for purchase. Purchased for a Honda Monkey to adjust the fuel mixture size 85. Everything fits perfectly, I recommend it to everyone to purchase. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail