Reviews
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail
I can't install it on my bike jb03
The quality is well made It's jb03 about the feeling of use, and I bought it after seeing it installed on YouTube, but I couldn't find it Cost performance and comparison to other products Kitako products are easy to distribute, but the headlights may not close Delivery and packaging to WeBike in a week The packaging is great Concerns when purchasing Please check the jack and purchase it. I looked all over the line but couldn't see it View detail
Fits: HONDA Forza300, APRILIA SRV850, BMW C650 GT, HONDA INTEGRA, HONDA Silverwing GT400, HONDA Silverwing GT600, HONDA phase, HONDA foresight, HONDA Forza Si, HONDA Forza Z, HONDA fusion, KAWASAKI Epsilon 250, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave 250 Type S, SUZUKI Sky Wave 250 Limited, SUZUKI Sky Wave 400 Type S, SUZUKI Sky Wave 400 Limited, SUZUKI Sky Wave 650LX, SUZUKI Sky Wave SS, YAMAHA TMAX 500
Cover is consumable! I replace it after 2 years.
I always use two layers of cover. The first one is just size, and I put Oversize over it. We recommend LETSCover, which is heat-resistant and flameproof spec! View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: HONDA NC750X, HONDA NC700X, HONDA Silver wing600, HONDA Silver wing400, HONDA FORZA X, HONDA FORZA Z, HONDA PS250, HONDA FAZE, HONDA CBR250R, HONDA CBR250RR, HONDA VTR250, HONDA FTR223, YAMAHA FJR1300, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI ST250, KAWASAKI W650
very good
They took good care of us. Thanks to them, I was saved. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Mounted on REBEL 1100
I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
The product came with scratches.
As per Title, I received a scratched product. 。
The price is quite expensive, but I guess that's what you get from an outside parts company. 。 The installation method is also quite insecure, just drilling holes and screwing them in. 。 So I'm trying to figure out if I can put 3 points on Bolt and Nut, but this is very difficult (especially Quantity).:Pair (for Left and Right) (MF10 is a large strange thing, like if you do this, you can't put that, or if you put that, you can't put this afterwards. 。
I think it looks nice, so it's good for someone who can afford almost 30,000 without worrying about the details.
View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Fits: HONDA SILVER WING, HONDA FORZAX, HONDA FORZAZ, HONDA FUSION, PIAGGIO RUNNER 125200VXR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SYM RV125, YAMAHA MAXAM, YAMAHA MAJESTY(s)
I'm out...
Within six months, it snapped and cracked...
It is not hooked anywhere.
Normally, when I pulled it to remove it from the Motorcycle, it snapped.
I think this is the amount of force you would normally use to remove a Cover from a Motorcycle.
It is a waste, so I will Repair it with Tape and use it up.
I wish I could keep it for at least a year!
In case you are wondering, the Yamaha Cover I bought 9 years ago is still in service!
View detail
Winter Essentials
I had survived the winter with only the ZETA hand warmer, but as I got older, the coldness in my hands started to get to me, so I bought it. View detail
Fits: HONDA SILVER WING, HONDA FORZAX, HONDA FORZAZ, HONDA FUSION, PIAGGIO RUNNER 125200VXR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SYM RV125, YAMAHA MAXAM, YAMAHA MAJESTY(s)
Toruna Motorcycle Cover
I am using FORZAMF-08 with backrest and box under the carport.
The size is exact, and the thickness and durability are commensurate with the price.
Not sure if it is suitable for outdoor use.
View detail