Perfect for dress-up!

The dress-up effect is great.
It also feels right in use. View detail

Matching with Caliper

Purchased a 1/2-inches diameter short lever to replace the front caliper with a Brembo crab caliper.

Piston diameter 32mm in combination with Caliper (hydraulic pressure ratio 6.35) is
No Control at all with stiff Touch.
Piston diameter 34mm in combination with Caliper (hydraulic pressure ratio 7.17) is
Good Controllability, although a little softer than the preferred Touch.

If it were a standard Lever, would the former combination have been acceptable? View detail

Brake Pads Replacement

I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it. View detail

For CB250F

good quality Oil Filter and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail

Used for MAJESTY 125 FBrakes custom

The MAJESTY125 and R1-Z have the same 83mm Pitch of the front brake caliper, so I used the R1-Z's caliper and changed the front brake to 4POD to strengthen the brake. So, I wanted to lower the Piston size of MASTER, and I wanted to be able to adjust the lever play by Dial as well as CB1300 Caliper, and I wanted to use a short lever. I also wanted to use short lever, so I replaced it with Nisshin's MASTER.

As expected, the brake has improved in both touch and braking power due to the MASTER's smaller-diameter piston size,
Now I have a performance problem on the Caliper side and want to replace the Caliper with the SumitomoCaliper from TZr250 after 3MA or the Nisshin caliper with 83mmPitch released from TZ125, TZ250 and AdvantageNisshin in the 90's. I'm looking for a new caliper. View detail

A little short, a little thick

I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people. View detail

Good product

Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail

I am satisfied

It was just as problem free as the previous product I purchased. View detail

The size is just right and the texture is good.

Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner. View detail

Blue empty parking.

Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty. View detail

Exhaust manifold Gasket

I chose the cheapest one and it was perfect - no problems and no gas leakage. View detail

Black still seems to be vulnerable.

Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time. View detail

4 pieces for 640 yen! It is a high-cosmetics product!

I was worried because it was cheap, but I compared it with the one made by POSH that I ordered with it and confirmed that it was almost the same.
I feel that the processing of the gaps in the Rings is rougher and more GizaGiza than posh, but I don't mind because it is something to be crushed and used. View detail

Made by POSH for safety!

I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine. View detail

520Conversion

Conversion520 from 530. It is easier to push and move. View detail

Easy to grip due to its folded shape

I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail

520Conversion

I was able to Conversion from 530 to 520. View detail

NisshinBrake master cylinder kit (Horizontal Type)

I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail

I am satisfied

It was a replacement for a Reasonable product from another company, but the texture and movement of the actuator were incomparably better. View detail

No particular complaints.

Goods that are consumable and sufficient without the need to buy expensive ones. View detail