Reviews
Thick and solid product
It is the same size as the Number, so it is not suitable for those who want to dress-up the outer frame of the Number, but I think it is an excellent choice for those who do not want to bend the Number. It is thick and the texture is not bad. View detail
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail
Exchange to One point
We replaced the OEM with this Cap.
I replaced it for the first time and it is very good for one point around the engine.
I'm glad I replaced it
View detail
On a 2011 CBR600RR.
I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
for the first time
I bought it because it was an old serow and never changed the code! View detail
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
easily control the throttle
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
It was cheap.
Anyway, I thought that the price was so low for a Stanley product, which I trust more than foreign-made products, even after I ordered it, but when it came in, I was surprised to see the price and quantity!
I installed the Meter Bulbs because I thought that if one bulb went bad, the other bulbs would also go bad, but two of the bulbs are replaceable!
The bulb packs are also easy to remove and store.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-01, YAMAHA FZ8, YAMAHA FZ-1, YAMAHA FZ-1N, YAMAHA XJ6N, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA TDM850, YAMAHA TDM900, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA DS250, YAMAHA SR400
Motorcycle Cover with good balance of price and quality
We recently added a Large size NAKED to our fleet, so we purchased the 2L Size.
I do not own any Yamaha Motorcycle, but all Motorcycle Covers are E Type by Y's Gear.
I am considering it for dust protection Main since it is stored under the eaves.
The new product seems to have been renamed E+ (ePlus), but I am not sure how it differs from the previous product.
I was relieved to see that the ease of use has not changed, with color-coding on the front and back to avoid hanging mistakes, and a draw cord to tuck in the hem to keep the wind from blowing in.
View detail
KIJIMAGrip heaterGH08Push Switch
It's been about two weeks since I installed it and so far no problems.
The Grip is a little thicker than I expected, but it is just right for me. I was thinking that I would mishandle the Switch if I used the type attached to the Grip, so I chose this type, and it was the right choice. It is easy to operate and I feel it is convenient to attach it anywhere I want. Also, my palms are quite warm if it is 4 degrees Celsius in the morning and the temperature is at the maximum. But only my fingertips are hard to keep warm. If you want to keep it on all the time, I think the 3rd or 4th of 5 levels would be best. I think the 3rd or 4th out of 5 levels would be best if you want to wear it all the time.
Electrothermal Gloves or Inner Electrothermal Gloves (You will need to bring your own Gloves separately) Would it be good to have a And.
With the skin Gloves with boa, the palms will feel sweaty.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
Heavy, but sturdy and waterproof seems perfect
The first impression is "heavy" It was. But I would describe it differently:sturdy, thick fabric, waterproof, and perfect as claimed.
However, I just bought it, so I can't say for sure, but it will probably be Large sturdy.
Due to the weight and the thickness of the fabric, it takes a little time to put it on the motorcycle, but that is understandable because it is solid.
View detail
SNIPERSNIPEROil Filler Cap
Perfect for One pointAccent. View detail
Grip heater refill
I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter.
View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Add on to Clamp on heated grips
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail
Easy to install, better than ManufacturerOEM
The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material.
View detail
O-ring for main jet
[How is it used?
Used for CarburetorO/H on TZr50R.
O-ring to be attached to the main jet.
How was your experience with it?
No problem, installed with Tweezers due to the small size of the parts.
How did it compare to other products?
Carburetor parts must be OEM parts. Low quality external parts can cause overflow and bodywork problems.
[Points to note]
The parts are quite small, so be careful not to lose them after taking them out of the bag.
Other items that would be helpful
Opinions and requests to Manufacturer:Please supply parts forever.
View detail