Reviews
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Has the part number been changed?
I have not seen any particular note, but I assume that if you order with this part number, you will probably receive the one with the -80 suffix, and from the aggregate information on the Net, it seems that some Filters, including the -61 one, have been unified with the new part number (-80 suffix).
It is a bit of a shock to receive a different part number without any explanation, but you will be able to use it without any problem.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
After all, it's OEM!
Along with the oil change, I replaced the Oil Filter. I can't tell if the Oil Filter is good or bad right away, but it gives me a different feeling of trust and security. When I replace it again, it will be OEM. View detail
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
It is easy to use
Brake Easy to grip and use as well as lever
It looks cool and perfect!
There was no XJR400R setup, so I replaced it with an FZ1N Bracket.
I changed the adjuster from M10 to M8 with Recoil.
A dress-up adjuster is attached.
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Used for Circuit practice
I use it for my Circuit practice runs.
I don't need it to be full, but it is too thin as it is on NORMAL.
Exhaust system was replaced and air cleaner OEM was installed, but Torque was raised and the burnt condition of the plug was good.
I am satisfied with the price because it is very effective with a simple installation.
By the way, since the driving is Cart course, I still think full control is necessary for long periods of high RPM in full Course.
It's like a city drive Plusα.
View detail
Genuine Brembo CLutch Lever fitted to YZF-1 2003
The YZF-R1 has already got a nice Brembo clutch system and the lever had seen better days so a replacement was needed. Finding the right lever was not hard as I already had the part number from a previous purchase direct from Brembo. However, the price that I paid for that was a bit high and I was pleasantly surprised that Webike did actually stock this precise lever. I had a couple of other smaller parts due to be ordered so I got them all shipped together to save on the cost of this. EMS is my chosen courier these days as their prices are superb and the amount of time it takes for the order to be delivered is perfect. 5 days from being shipped from Webike and my order arrived successfully. All was really well padded out with bubble wrap and no damage was found. This lever did come in the Brembo plastic packaging anyway and was still put inside a nice padded envelope for safety. I have never had any issues with Brembo lever for fitment as they are extremely precision made to a very high standard. The glossy paint finish is very tactile and lovely to touch. The mechanism of the lever is smooth as you like. One very happy customer. The bike looks amazing, thanks Webike for all your help. View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail