Add on to Clamp on heated grips

Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail

It was expensive to prevent Rust.

I have attached a Stand Hook even though I do not have a Maintenance Stand. The purpose is to prevent bolt hole rust.

I ordered at Tension at night even though I'm not particular about K-FACTORY, and when I reconsidered, it had already shipped and I was done with it.

If you want to prevent Rust, you can use a cheap one.

As mentioned above, I don't have a maintenance stand, so I don't know how I feel about it, and I don't have any feelings for K-FACTORY as dress-up parts. View detail

Easy to install, better than ManufacturerOEM

The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material. View detail

GILLES TOOLING GTA Front Wheel Slider

Damage reduction to the vehicle in the event of a fall and was installed as a talisman.
Above all, it looks good and Parenthesis is good. View detail

Excellent choice, cheaper than OEM.

Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plus These filters are a good value and have worked great for us. View detail

It is necessary for Circuit driving.

Rear Sets from the old Over. View detail

Purchased for about 2,600 yen

These are ordinary Brake Pads.
Sintered system.

The Red Pad is easier to feel, but it is too fast, so I use this one in Main.
I'm using Rear all the time, too, so of course I'm losing a lot.
On Amazon, the price fluctuates between 2,600 yen and 2,900 yen.

If you're having trouble choosing a pad for touring or city driving, I think this is the one for you! View detail

very good. This is excellent in finish and quality

There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail

Cospa is good

Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles. View detail

Required in winter!

It has been 3 months since I installed the Grip heater on my NC750X and the day to use the Grip heater has arrived. The warmth is not a problem, but the Horn is above the blinker on Honda cars, so the blinker is not easy to operate with winter gloves. Since we did not expect to use Winter Gloves when we installed the Grip, we had to change the position of the Grip in a hurry. Even after changing the position, the connectors on the Grip heater are still in the way (especially when turning right) and the operation is not easy. You may get used to it, but please be careful if you drive a Honda car. View detail

Genuine Yamaha O-Ring for FJR1300 2018

I was doing some maintenance on this bike and noticed a small leak from the oil cooler. After some investigation I found that one of the 2 o-rings on the joint was perishing and was not holding as it should. No problem. I checked Webike help pages and got the links to the Yamaha schematics for this model. The part was pretty straight forward to find and does fit a few models anyway. Webike price was excellent as always and so I got a new set of 2 and a couple of spares to save. No point is scrimping and just buying the one as at some point, the other o-ring would need replacing anyway. With a couple of other parts in my basket, I got them all shipped together via EMS and the order was delivered quickly in 5 days from shipping. The o-rings were in teh standar Yamaha packets and inside a small bubble wrap envelope. Yes, they are just o-rings but these o-rings need to work as they should in order to make a good seal from the joints. This was their purpose and that is exactly what they did. They had a lot of flex but that was not a problem as they seated in just the one placement anyway. Job done, no leak, very happy customer. Thanks Webike. View detail

Already the third one.

Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail

To replace Brake switch on MT-09SP 2021 and to replace external MASTER!

The OEMBrake switch from MT-09SP2021 onward has a two-stage configuration, where two physical switches are activated by a gap via the AXIS checker in the order of Stop-lamp on → Crucon Off. The spring used for this OEMSwitch is a very hard type, which spoils the goodness of the OEMRadialPump, especially the fee ring at the time of Release at the time of Timing of entry from the full brake before Corner is uncomfortable and hard to control. It is hard to control.
This product substitutes the movement of the OEMSwitch with the internal Relay, and by using it inside the Headlight cover, you can use the simple OnSwitch of the NISSINOEM, and the fee ring caused by the spring of the OEMBrake Krkon Switch can be improved. The fee ring deterioration caused by the spring of the OEMBrake crucon switch can be improved.
We used it when we converted to bremboCORSA CORSA Corta, and CORSA Corta OEMSwitch was also usable without modification.
MT-09SP2021- riders, please try to grip the brake lever with the brake switch removed from your motorcycle. You will notice that it is noticeably lighter, and you will be able to feel the increased controllability of the release.
If it is not enough, you can replace it with bremboetc. external MASTER at that time. This product can be used even at that time.
When we put it on, there was not much flexibility because of the limited space in the Headlight cover, but we managed to fit it in.
This feature is almost indispensable when replacing an OEMSwitch with a simple NISSINSwitch, and is also effectiveLarge when replacing an external MASTER.
It took a little time to order, but I'm glad I bought it. View detail

Good. ??

In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^ View detail

Genuine Yamaha Cotter Valve for FZ1 2006

I was doing a full valve rebuild on this FZ1N 2006 and needed the cotter valves as I did not have these is my garage. I did struggle to find the parts actually available locally so I decided to get them from Webike. I found the parts pretty easily as I already knew the other parts needed and had a schematic for the rest. The price Webike had these for was really good value. With a few other parts in my order, all the items were shipped together with EMS and arrived in perfect condition in 5 days. The packages were all individually packed in Yamaha envelopes and stapled together so I did not lose any in the box. The valves are really small parts and can become damaged if not well protected during transit. Webike have this part spot on, very well packed out with padding. The valves themselves are brilliant quality and you can see this from the machine work that has gone into them. Crisp and clean and no weird shards of swarf on them at all. Just got to get around to fitting this all in with a busy schedule now. Very pleased with the purchase for the 4 cotter valves. View detail

Genuine Yamaha Diapragm Reservoir Gasket for FZ8 2012

The old reservoir diaphragm was not in the greatest of condition when checking the fluid for maintenance. There was a noticible split in part of it and this is no doubt why the braking was useless on this bike. I was not going to leave it like that so decided to get a brand new one from Webike. The part was easy to find using the tools Webike provide and cross referencing with Yamaha schemaics for my own assurance. The price was excellent and better than I could surce locally. Shipped with EMS all my parts arrived in 5 days from shipping. The diaphragm came in teh usual Yamaha packet and aslo inside a bubble wrap encelope for safety. The diaphragm itself is a lovely moulded piece. Very supple and maliable which is of course needed to cope with the constant preseures of the brake fluid. Not too hard to fit as it is just a straight swap out. Now all back together, the brakes now work as they should. Give it a week and I will also bleed the brakes again. Great job, thank you so much Webike, happy customer. View detail

Vmax1200.

I got this because it was cheaper than OEM. Nothing wrong with it. View detail

Genuine Yamaha Front Brake Reservoir Cover for MT10 2019

The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail

NTB Front fork oil seal FOK-07

It was for KAWASAKI, but it can be used for SEA BASS cars as well.
I installed it on a GSX-R1000 K7 since it seemed to work. View detail

Genuine Yamaha Front Brake Reservoir Cover for MT10 2019

The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail