Reviews
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
It is a regular replacement.
I have been using it for almost 2 years now and it is starting to get holes in places, so I decided to replace it. I always buy cheap ones, but this time I chose Black. I am glad that it is not noticeable at night. I wonder if the color will change after another 2 years or so due to tanning. I used black once before, but the color of the black one changed considerably due to tanning, so I will see how it goes this time. The cheap ones are good enough to use. I have used Black once before, but the color of the Black one changed a lot after tanning, so we will see how it goes this time. View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F, YAMAHA YZF-R1M, SUZUKI GSX-R1000R, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS, SUZUKI GSX-S1000GT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, SUZUKI GSX-R1000, SUZUKI KATANA
appearance
It is almost all about looks. Installation is easy, but be sure to follow the tightening Torque. View detail
License Plate Base
Installed on a '24 GSX1300R HAYABUSA 。 It was Exactly without interfering with YOSHIMURA's Fender lessKit. View detail
I like YOSHIMURA.
The OEM rubber packing is used as it is, and the Oil Filler Cap is added to make the engine area look very tight.
LargeSmall:2 pieces in a pack, but the smallest is hidden by the cowl and hardly visible.
It can be installed by taking a few Cowl screws and shifting them slightly.
In the meantime, I used Torque wrench.
View detail
Barrel-shaped without being too flashy.
I wanted a Barrel Style Grip Pierced Type and purchased it. I have been using it for several months without any pain in the rubber or any problem that affects the accelerator operation.
Since it is not a blatant barrel shape but a casual bulge, I don't feel that the Large grip is different compared to the Grip with a straight line design. It is not a barrel shape, but rather a subtle bulge. Still, the Fit feeling in the hand is comfortable.
View detail
Response improved!
The tanks can only be removed and attached by shifting the tanks, so it is suitable for people who have done a lot of work on them!
However, considering the price, I think it is a recommendation replacement work if you can ride comfortably by replacing the Ignition coil earlier than the Manufacturer replacement distance.
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
Perfect for dress-up!
The dress-up effect is great.
It also feels right in use.
View detail
An extremely popular choice when looking for a very comfortable grip at an affordable price
About quality and texture - The soft rubber doctor grips from Kijima are made from rubber and with a simple design and soft surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The soft rubber doctor grips are an extremely popular choice when looking for a very comfortable grip at an affordable price. All round better grip then the original Honda Grom grips with a focus on comfort due to their shape and the material used. Products to buy together - A suggested product to purchase with the soft rubber doctor grips would be a heavy set of bar end weight to further increase comfort by removing addition vibration from the handke bars. Difficulty of installation - The installation of the soft rubber doctor grips is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the grips to the handle bar and thottle tube. An air compressor if available will ad in the removal of the original grips with ease. Cost performance and comparison with other products - I find the cost of all the products Kijima sell to be great value when compared to what most other companies sell their products for and the soft rubber doctor grips are no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the soft rubber doctor grips, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
Z900RS used purchased, 4.800 kg, plug replaced
Purchased to replace a plug.
Kawasaki Z900RS cafe
second-hand acquisition
4.800 kg
○ Self-exchange
3 days later, he went to Touring Motorcycle shop.
I'm in good shape.
○Drive yourself home when you deliver the car.
It was Short/Two, but
FeeRing has improved since then.
To all of you...
Highly recommended! (^-^) /
View detail
Stable Explosive Power
Large cutting Plug that sends strong sparks flying.
Since we have installed Uotani SP2, PlugGap is spread out as specified.
This purchase is as a spare part.
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
Brembo radial master
SEA BASSRGV250Γ (VJ22A) It is used for
We found a Fluid leak from the OEM Master Cylinder due to deterioration, and were torn between Overhaul, a new NISSIN, or a YamahaOEMbrembo, Get me the best one you can." This is why we chose this product.
The OEMCaliper piston diameter is an opposed 4-pod 30/34mm double disk, but Radial master recommended 17mm or 19mm, but I prefer a firmer touch, so I finally chose 19mm.
The original hose was a Swage line mesh hose, and the handling was different from the OEM hose, so the hose was simply attached with the supplied banjo bolt.
The tank bracket, tank, and hose were purchased separately, and the brake switch was installed using the Emon Flat Terminal instead of the Bullet Type Terminal, which came with the brembo wiring, because we did not want to change the OEM wiring. The brake switch was installed using Emon's Flat Terminal instead of the Bullet Type Terminal.
I was worried about interference with the cowl when installing the tank, but there was no problem, although the clearance was about 5mm when the handlebar was fully cut.
Air venting is very easy because of the Bleeder Bolt on the MASTER side.
As for the key performance, even my insensitive self could feel that BrakeTouch was improved over OEM.
I am not sure if this level of specifications is necessary for touring on public roads. (Lol)
However, my impression is that it is a little harder than I expected.
It's not a Level that has problems of course, and even at 19mm, it's definitely significantly better than the OEM Master Cylinder. (OEMTokico) And I think there is also the issue of compatibility with
I have not tried it, so I can only imagine, but I think 17mm would be fine.
The lever is also infinitely adjustable, so you can grip it from your best position.
Finally, as for the appearance, it is very beautiful, but it is too beautiful for old cars and floats a bit. (Lol)
It was a bit expensive, but I felt the price was well worth it.
View detail
For ZX-14R High-grade brembo M50
If there is a fit from Endless, this is the one to choose.
CircuitUser has also been very well received.
bremboM50for Caliper
View detail
![[Closeout Product]Handlebar End IP[special price]](https://img.webike-cdn.net/catalogue/images/116115/LG-IP-22g_01_TS.jpg)
It says it is TMAX560 techmax compliant, but it is completely useless.
I bought it because it was supposed to fit, but it did not match the Screw shape of the Handlebar End at all. I was very disappointed. View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Great product for the price
Sometimes a backpack is not enough.I use it for daily trips ..After reviewing several different tail bags, the Tanax seemed to be the perfect size.the Trails End bag attached securely and the excess length of the strap ends, tuck away cleanly. It looks well made, and I especially like the fact that the bag keeps it shape when empty.It is waterproof and the fabric is durable.Additional pockets are very functional.really great price, good and quality from many known brands.highly recommend. View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Even if it's your first time, just look closely at the structure.
It is an OEM Product and I have no complaints. The gsxs125 is a Shift rod Quantity:Pair (for Left and Right) I have an identical Dust cover on a 3.5" board that cracked at about the same time, so I think it would be a good idea to buy two or three of them. It is not so difficult to replace the cover if you look at the structure carefully and understand it, and it would be good to have a marker to mark the Shift Pedal or Nut so that you can put it back in its original position. Wrench and Grease are all you need. View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail