Reviews
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Good sense of unity!
I purchased this for my Roller stand.
The color is the same as the color of the original.
View detail
Good except for Bolt.
The weight was not so heavy in my hand, even though it is called "heavy weight".
It is a little heavier than the OEM Product, but it is certainly heavier than the OEM Product, which is a relief.
As seen in your impressions, Bolt is too long and cannot be installed.
Bolt length 60mm→replaced with 50mm to solve the problem.
Purchased at Home center for 1 pc 53 yen (Rose sale item).
Well, it was predictable, and an extra 106 yen won't hurt.
The texture is good, but we have to judge that the quality is no good when Bolt does not fit.
It is hard to understand why they are proudly listed as compatible models.
We are the 08MODEL of 1400GTR.
By the way, I think it is ★★★★★ except for Bolt.
View detail
I have no complaints about the texture and sound.
The texture of the actual product is better than the picture, and the sound is very good, with a bass-oriented thumping sound.
The volume was surprisingly large for a certified exhaust system, but I guess that was because the original Normal muffler was too quiet.
I had a feeling that the overall power was increased as described in the Manufacturer's description.
Very cosmetically pleasing and I am satisfied with the Large change.
View detail
Installation of a 23 year old Ninja 400 is OK!
Installed on a '23 Ninja 400.
We were able to install the system without any problems.
Screws are not so hard that they cannot be removed, so I think a regular Hexagonal Wrench is Large sturdy.
If you ride a Ninja 400 and want to install a Smartphone Holder or USB Socket, this is a good choice!
View detail
KIJIMAGrip heaterGH08Push Switch
It's been about two weeks since I installed it and so far no problems.
The Grip is a little thicker than I expected, but it is just right for me. I was thinking that I would mishandle the Switch if I used the type attached to the Grip, so I chose this type, and it was the right choice. It is easy to operate and I feel it is convenient to attach it anywhere I want. Also, my palms are quite warm if it is 4 degrees Celsius in the morning and the temperature is at the maximum. But only my fingertips are hard to keep warm. If you want to keep it on all the time, I think the 3rd or 4th of 5 levels would be best. I think the 3rd or 4th out of 5 levels would be best if you want to wear it all the time.
Electrothermal Gloves or Inner Electrothermal Gloves (You will need to bring your own Gloves separately) Would it be good to have a And.
With the skin Gloves with boa, the palms will feel sweaty.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Better than OEM
Vibration is reduced by being heavier than OEM.
Also, in the case of zx4r, with OEM, I was hearing a chattering sound from the Left Side, so that will be eliminated as well.
I wonder if the replacement product has a slight gap (see image).
View detail
SNIPERSNIPEROil Filler Cap
Perfect for One pointAccent. View detail
More windproof than OEMLong Screen!
It was windproof, though it was comparable to OEMLong.
I am 170 cm tall, and in a normal posture, the wind that used to hit me in the lower neck and chest area now flows toward my upper neck.
I also feel that there is a little less wind on my shoulders.
I think it would benefit a lot on highways because the airflow would be completely over the Helmet when it is in a low position.
However, there is some rattling if the product is installed as is, perhaps due to lack of precision. As other owners have said, the rattling was eliminated when a rubber plate was inserted.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
sv650 is 2L
I bought a L because the fit guarantee said L, but when I put it on, it was BitchBitch's tight-fitting.
It took a while but they accepted the return and repurchased the 2L.
Easy to detach and attach.
Rain does not soak through.
It certainly does not dissolve when attached immediately after an Engine stop.
Good
View detail
Appearance ImpactLarge
It would have been best if the Mounting Bolt had a Screw lock agent. View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Ease of use is the best
Can be used immediately after returning from touring.
Easy to install and remove
I was looking for a product that satisfied the above two points and found one that looked just right, so I popped it in.
From the results, I'm really glad I bought it.
It is very easy to put on and take off, the cloth is firm, and I am very satisfied. It is a bit pricey, but if you think you can use it for a long time without Stress, it is rather cheap…?
I bought it when I bought a new Motorcycle, but I wish I had bought it sooner.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Standard Large capacity
Installed on klx230sm.
It is still safe to have a Side stay for installation.
The type opens from the side, so it is good that there is no interference even if the Rear back is mounted on top.
Fixing the system requires some ingenuity depending on the type of car, but I think the only way to do that is to devise a solution for each individual car.
View detail
Grip heater refill
I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter.
View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Z400, KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z900, KAWASAKI Ninja250, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Also available for 2023 MODEL
I liked the variety of colors and being able to choose my preference. View detail
SNIPERSNIPERMaterial:AluminumBrake Lever Guard
I wanted to use Carbon, but it will not be in stock for 6 months, so I decided to use full Gold Spec. View detail
Fits: KAWASAKI Ninja 650, KAWASAKI NINJA400 (2014-)
ACPerformance line (Rear) installed on ER-6F
[How is it used?
Mostly city driving.
Was the one you received as per Image?
Yes, I have it on the front of this vehicle. I have had it on other cars and it was on the Front of this vehicle, as per Image.
Was the installation difficult?
It is necessary to work with a certain amount of thought. Although the product is model-specific, it is not an exclusive design like OEM products, so it is not enough just to follow the instruction manual.
How was your experience with it?
Good as a dress-up. Functionally, the effect is not dramatic.
[Included Parts:were they on?
Product ContentsAll items as shown, plus Sticker, Tie Wrap1 pc.
[Was there anything that disappointed you?
I wish it could be attached exactly the same way as OEM, but I have to be a little creative. However, it is not a car model Exclusive Design, so I think this is what it will be.
Other items that would be helpful
The installation points and hang/instruction manual says to put the Adapter tilted 20 degrees to the MASTER side, but I can't tell from the pictures in the instruction manual if it's facing Up or Down, That doesn't make the Hose routing from the reservoir Tank to the MASTER look very good. After trying many things, I think it is probably correct to turn the AdapterUp, Rubber hose to the down side as shown in the attached picture.
Instruction Manual:Yes, but it is in WhiteBlack and the pictures are small. However, it is still difficult to understand the details.
Note/Banjo bolt is also included, but the attached photo shows a Gold banjo that was purchased separately.
Items to buy together/Molybdenum grease and ClawFootWrench and Torque wrench (if you don't have one).
Opinions and requests to Manufacturer/I think 16,000 yen for front and rear is a little expensive for LightCustom purpose.
View detail
Add on to Clamp on heated grips
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail
Easy to install, better than ManufacturerOEM
The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material.
View detail