Replace with new one

This is a replacement along with Bolt replacement.
It is like thin Packing, but Wound-proof? Prevention of loosening? It is not cheap. It is not cheap. View detail

Matching with Caliper

Purchased a 1/2-inches diameter short lever to replace the front caliper with a Brembo crab caliper.

Piston diameter 32mm in combination with Caliper (hydraulic pressure ratio 6.35) is
No Control at all with stiff Touch.
Piston diameter 34mm in combination with Caliper (hydraulic pressure ratio 7.17) is
Good Controllability, although a little softer than the preferred Touch.

If it were a standard Lever, would the former combination have been acceptable? View detail

Maintenance.

I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL! View detail

Size is Exactly

The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly. View detail

For CB250F

good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail

Brake Pads Replacement

I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it. View detail

It was replaced under warranty.

The other day, I was told that Quantity:Pair (for Left and Right) The footpegRubber on my LARGE footpeg came off and was under warranty. I received a new footpeg and replaced it. Thank you very much. View detail

For CB250F

Same as the genuine Front Fork Oil Seal Set . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail

Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .

Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail

Used for MAJESTY 125 FBrakes custom

The MAJESTY125 and R1-Z have the same 83mm Pitch of the front brake caliper, so I used the R1-Z's caliper and changed the front brake to 4POD to strengthen the brake. So, I wanted to lower the Piston size of MASTER, and I wanted to be able to adjust the lever play by Dial as well as CB1300 Caliper, and I wanted to use a short lever. I also wanted to use short lever, so I replaced it with Nisshin's MASTER.

As expected, the brake has improved in both touch and braking power due to the MASTER's smaller-diameter piston size,
Now I have a performance problem on the Caliper side and want to replace the Caliper with the SumitomoCaliper from TZr250 after 3MA or the Nisshin caliper with 83mmPitch released from TZ125, TZ250 and AdvantageNisshin in the 90's. I'm looking for a new caliper. View detail

A little short, a little thick

I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people. View detail

PetitCustom

PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color! View detail

Standard PetitCustom

For Caliper's color insert!
Trial installation before putting brembo in.

4mini standard color:?? View detail

Manufacturer Warranty

Less than a year after purchase, Rubber is Quantitative:Pair (for Left and Right) Both peeled off.
This is what happens, isn't it?
Contacted Webbig Customer because it was a Manufacturer warranty or 1 year.
We are pleased to announce that we have received the Manufacturer Guarantee.
I have purchased many different Parts, but this is the first time I have had a Manufacturer's Warranty.
If you purchase Parts with a Manufacturer's Warranty, you should keep the Manufacturer's Warranty and the delivery note. View detail

Good product

Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail

Genuine Kitaco Exhaust Gasket for NSR250R

These were purchased due to changing the exhaust too many times in the past and the gaskets were not doing as they should. The correct part was found by simply searching the model of bike and the Kitaco gaskets came up in the search. As these have had good reviews, I decided that I would give these a try myself for this exhaust change. They gaskets were pretty good value and yes, they are only gaskets but they do need to be right. With some other parts in my order, I got them all shipped using EMS. The order arrived in 5 days from being shipped which is perfect. The gaskets came in the Kitaco standard packaging for this item and were well packaged. The gaskets themselves look to be really good quality and there were ne signs of any problems with the size or condition. Absolutely perfect fit and not a leak in sight. Very impressed with these gaskets and Kitaco is going to be one of my go to brands from now on. Great work Webike. Keep it up. View detail

It was a little small.

[How is it used?
I purchased this product because the Cover I was using had deteriorated and torn.
It is used in a covered parking lot for dust protection and anti-theft purposes.

Was the one you received as per Image?
Yes
I think it is solid for the low price.

Was the installation difficult?
It is difficult to discern the front and back.

How was your experience with it?
I looked at the size chart and purchased the size listed for my car model, but it was a little small.

[Was there anything that disappointed you?
None

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer

I thought it would be nice to have a Mark or Line that could be used as a landmark so that it would be easier to see the front and back. View detail

Genuine DID replacement chain link

As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

The size is just right and the texture is good.

Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner. View detail

First MirrorBlinker installation

I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur. View detail