Reviews
Good heating grips!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
520Conversion
Conversion520 from 530. It is easier to push and move. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
520Conversion
I was able to Conversion from 530 to 520. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail
Simultaneous purchase at the time of Chain replacement
Purchased in conjunction with Chain replacement.
*Buy and replace both front and rear.
It is recommended to replace it with Chain at the same time.
Shift has also changed so much that it is easy to get into and back to the way it was in the new car.
View detail
DJEBEL250xc.
Installed on a DJEBEL250xc, cutting off the OEM ignition coil in the middle and connecting it. It is a recommendation to refresh the electrical system. View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
Good Brake Pads
Very good Control. Durable and reliable. View detail
Would have to be one of the better value magnetic drain bolt
About quality and texture, I can confirm that the quality is great and that the material used is aluminum alloy with a permanent magnet on the base of the bolt. About the feeling of use, Would have to be one of the better value magnetic drain bolt that allows for securing with lockwire and successfully removes fine iron powder from the engine oil.Products to buy together, The drain bolt only comes with one sealing washer so it would be a good idea to add a few spare sealing washers to your cart for future oil changes.Difficulty of installation, I can say the fitment of the drain bolt for my installation was very easy due to the exhaust not limiting the access with the use of a socket and 3/8 drive ratchet.Cost performance and comparison with other products, The pricing of this product is great. You receive a drain bolt with a strong magnet and the head of the bolt has the functions to attach locking wire. The pricing of other drain bolts with similar features like the one from Takegawa is double the price and I don't see the reason for it.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
Magnet works effectively
It is cheap and the performance is perfect. However, I don't think it has much of a dress-up effect because it is usually invisible, even though it is Blue in color. View detail
Fits: HONDA VTX 1800, HONDA VT 750 S, HONDA VT 1300 CX Fury, HONDA VT 1300 CX, HONDA VF 750 Magna, HONDA VF 700 C, HONDA VF 750 C, HONDA VT 600 Shadow bis Baujahr, HONDA VT 600 Shadow, HONDA VT 1100 C Baujahr, HONDA VT 1100 C, HONDA VT 800 C, HONDA VT 700 C, HONDA VT 500 C, HONDA VT 125 Shadow, HONDA VF 1100 C, HONDA CMX 450 Rebel, HONDA CMX 250 Rebel
It was not compatible with VT1300CX.
I bought it because it said it was compensated for conformity,
The mounting did not fit into a 2010 VT1300CX.
I had no choice but to shave it down and install it.
However, if the shaving is a little too much or not flat,
It is expected that the rattling will be so severe that it will be unusable.
After installation, I am satisfied, but it is for people who can do the processing well.
View detail