Reviews
I made a mistake in my Size selection.
Motorcycles like mine with a Rear Carrier installed should be 1 or 2 sizes larger than the appropriate size.
If this Cover gets damaged, I'll go for 2SizeLarge next time!
View detail
Perfect for dress-up!
The dress-up effect is great.
It also feels right in use.
View detail
Size is Exactly
The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly.
View detail
2-wheel dedicated Plug
It is often said that Iridium plugs are difficult to understand the carburetor setting, but I think this 2-wheel dedicated plug is easy to judge the thickness of the main jet and slow jet.
I feel that a little thicker is more reliable because of the strong momentum of the Spark. If it is even a little thin, the electrode will be firmly White.
I thought it would be easier to judge than Windshield IRIDIUM.
View detail
The pictures are confusing.
I bought this for use on a 2023 SV650.
It's my fault for not checking carefully, but I saw two Levers in the sample product photo, so I decided to order a Quantity:Pair (for Left and Right) Quantity:I bought it thinking it was Pair.
When it arrives, it is only Brake lever.
I had no choice but to purchase an additional Clutch, but since it was not sold for the SV 650, I had no choice but to return it.
The product itself had a good texture, but the sample photos were confusing.
View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Titaniumium color!
Small but finely crafted
Luxury that you can feel in your hands
Worth the Gold!
View detail
No installation or operation problems
[How is it used?
SEA BASSRGV250Γ (VJ22A) I bought it because it was compatible as a Clutch lever for
To be frank, I was fine with any brand as long as it was black to match the Brake lever, so I chose KIJIMA's, which was the least expensive among them.
Was the one you received as per Image?
I thought it would be a little more matte from the picture, but the product I received was a rather shiny Black.
It's not that much to worry about, so it's okay.
Was the installation difficult?
Simply remove the Bolt from the Clutch holder, remove the Clutch Wire and Grease up and put it back.
It took only a few minutes and the replacement was completed easily.
How was your experience with it?
It is a very ordinary clutch lever, neither good nor bad.
There is no adjusteretc., so adjustment is not possible, but I think that is unavoidable since the price is low for that reason.
The rattling with the Holder is minimal, allowing for worry-free operation.
It would be a good idea to always have a spare in case of a fall.
[Included Parts:were they on?
LeverBody only.
[Was there anything that disappointed you?
It was not so much a disappointment, but the glossiness was a bit of a concern.
【Review】
We had no problems installing it with the inexpensive Clutch lever.
In addition to Black, Silver is also available as a lineup, so you can choose whichever you like.
View detail
I replace them regularly.
This is a small component, but it is a large component that holds Brake Pads.
Rust-resistant Stainless Steel is easy to maintain.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI INAZUMA1200(GSX1200FS), SUZUKI BANDIT1200, SUZUKI BANDIT1250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GRASS TRACKER, SUZUKI GSX-R250/R, SUZUKI INAZUMA400, SUZUKI RV200 VANVAN, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI GSX1400, SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI SV400, SUZUKI SV650, SUZUKI SV1000
Good work.
I am satisfied with no BALI.
O-rings are not attached.
View detail
There was no one with Level gauge.
The OEM Product was not strong enough, so it was replaced. After installation, I found that the flange surface is narrower than the OEM Product, so there is a gap between the OEM Product and the engine side. I would have liked to have had a product that fits Exactly. View detail
You can trust me.
I bought it from another Motorcycle and had no problems, so I trusted them. View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, HONDA CB1000 SF, HONDA CB400SF, HONDA X4, HONDA CBR1100XX SUPERBLACKBIRD [Super Blackbird]., HONDA CBR900RR FIRE BLADE [Fireblade]., YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XS1100, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, SUZUKI GS1000, SUZUKI GS750, SUZUKI GSX1100, SUZUKI GSX750
Just cover it!
Funnel is bad for the engine and does not pass vehicle inspections. The RAMAIRSystem is a simple system that can be installed on the engine, and it is easier to remove than the Power Filter, so if you want to change to a funnel, you can easily remove it. View detail
Fits: YAMAHA tricker, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR250, YAMAHA TZR250R, YAMAHA SRX250, YAMAHA RZ250R, SUZUKI Bandid 400, SUZUKI Bandid 250, SUZUKI glass tracker, SUZUKI wolf, SUZUKI ST250E, SUZUKI RGV25O Gamma, SUZUKI GSX250S Katana, KTM 390 Duke., KTM 200 dukes, KTM 125 dukes, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZZR250
It was a little small.
[How is it used?
I purchased this product because the Cover I was using had deteriorated and torn.
It is used in a covered parking lot for dust protection and anti-theft purposes.
Was the one you received as per Image?
Yes
I think it is solid for the low price.
Was the installation difficult?
It is difficult to discern the front and back.
How was your experience with it?
I looked at the size chart and purchased the size listed for my car model, but it was a little small.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it would be nice to have a Mark or Line that could be used as a landmark so that it would be easier to see the front and back.
View detail
Thank you Plus mu.
I had never used a disc before, so I had no knowledge of how to install it, and when I looked at Mu's installation instructions carefully, I saw a note that said to use two shims for a 4mm disc. However, the box contained only the number of shims I requested. When I called them to ask for an explanation, they responded in detail and kindly. Thank you very much. Thank you very much. I don't know if it is because I bought a slightly old motorcycle used instead of a recent motorcycle, but the floater was removed due to deterioration, and I had to replace it with a new one. But I didn't have the courage to replace a disc with almost no miles on it, and I found Plus mu through the ad-vise of PhoLower. I think that there are people who buy old motorcycles in pursuit of romance, not only my motorcycle. But please don't worry. If you have Mr. Mu's products, even if you are in my situation, you can revive your OEM. I am sure you will be satisfied economically, visually, and in terms of customer service. I apologize for the length of this message. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
Cool & lightweight
The Gold is not too assertive and the texture is perfect.
I am satisfied with the lighter weight compared to the OEM.
View detail
HURRICANE triangular table spindle nut
Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail
Easy to use
Easy to grip and use
It looks cool and perfect!
View detail
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail