Cheaper than OEM

I bought this one because it was cheaper than OEM.
There are no exhaust leaks and no problems. View detail

For THRUXTONRS

OEM replacement for Triumph is not available, but if the OD and internal Screws match.
Can be installed. Always change Oil and Drain plug Magnet
This product gives me peace of mind when I look at it and worry about all the iron dust.
Overall length is slightly longer than tiger OEM, but no problem for installation. View detail

Titaniumium color!

Small but finely crafted
Luxury that you can feel in your hands
Worth the Gold! View detail

Small

I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail

Fine Alloy 55 (Fine alloy) Brake Pads

Compared to other companies' pads, when the front brake is applied, it works much better than before. View detail

Affordable and easy to use

[How is it used?
Wiring was needed for Circuit Running.

Was the installation difficult?
Copper Washer is included, so there is no need to buy it separately for the first time.
Of course, without the WiringPlate, wiring is not possible, so please purchase and install it separately.
6R is Oil Pan Bolt with Plate bite.
I was reluctant to remove the oil pan bolt, but so far there has been no oil seepage, so I can use it without any problem.

How was your experience with it?
Designability is not particular, but I have no problem with the functionality.
Affordable and easy to use.

[Included Parts:were they on?
Copper Washer and Wire included.
It is a one-time fee and must be purchased the next time it is used.

Point and hang of installation
Wiring should be done by applying tension in the direction that the bolt is tightened. Sometimes we see wiring that is not only meaningless but also dangerous. View detail

To change the oil.

Purchased to replace Element along with Oil replacement.
It was well made and worked fine. View detail

There was no one with Level gauge.

The OEM Product was not strong enough, so it was replaced. After installation, I found that the flange surface is narrower than the OEM Product, so there is a gap between the OEM Product and the engine side. I would have liked to have had a product that fits Exactly. View detail

It is not a pure Black.

The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail

Nice...

I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it. View detail

Replace Red with Golden Pad

I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `) View detail

As expected of DAYTONA

Was the installation difficult?
pimping
How was your experience with it?
It's going to look different View detail

It was EXACTLY!

I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10! View detail

Posh indicator lenses

Very well packaged and very good quality lenses. The lenses took five minutes to fit and look great they are not too dark and you can see the orange bulb when illuminated View detail

Dress-up in a casual way

It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper. View detail

Good texture

I bought it because I liked the texture and design.
The moving part is fixed by Bolt, so it could be loosened by vibration, and it was necessary to carry a tool at all times. In windy conditions, the Motorcycle Cover could push it loose.
I don't put much force on the Arm Up, so the Right Arm was hard to Gap. I also used the seat Gold, but it did not improve much. I don't think it was loose due to weak tightening.
Visibility would depend on the compatibility of the Motorcycle, but I could not see directly behind me on the FAZER.
It is a Cool product and should be used well together. View detail

Kagoshima Touring for 1,600 km

Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail

The oil filler cap is very convenient to use and decorate

Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail

Oil Filler Cap

Changed to Green Light or Gold. View detail

Casual Dress-up

For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product. View detail