Reviews
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Advanced heating guard
I purchased the GP-Magnum and thought it would be better to use a genuine heating guard, so I bought it even though it was a bit expensive. I am satisfied with the sense of unity and quality. However, I installed it as shown in the product photo, but when my calf touched the gap between the muffler and the flue, it was very hot. . So I reinstalled it to prevent the seams from opening up, and it's a little better. It's hotter than I expected, so I'll definitely have to wear a heating guard. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
It goes well with the carbon colored Magnum muffler.
The original muffler had a guard, so there was no need to worry about burns. However, after installing the carbon-colored Magnum muffler, I couldn't help but worry about getting burned if I just rode it without a carbon heat guard. After purchasing and installing it, it matched very well with the carbon-colored Magnum muffler. It was as if it came as a single product. .The heat blocking function is also excellent. I recommend it. -------------------------------------------------- -------- There was a guard in the genuine muffler, so I didn't have to worry about burns. But when I was equipped with a carbon -colored Magnum muffler, I couldn't worry about burning without a carbon hit guard. The heat breaking function is also excellent. I recommend it. Powered by Google Translator View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
V125S Screw (forward/reverse) must be confirmed
MyMotorcycle V125S Mirror was selected from the hit items in the search from the state that had been set to
Hit, 10mm Normal Thread Screw But when I actually tried to attach it to the vehicle, I found that it was 10mm Opposite Thread Screw was
By year etc, Positive/reverse." It is always better to check the direction of the Screw on the actual car, as there seems to be
As a result, we purchased an additional Conversion Adapter (at a local store because we were in a hurry).
Quality *2:Because Mirror moves due to running vibration (maybe product difference?)
Visibility *2:Because the cut area of the Fashion oval is less visible than the OEM oval due to the reduction in area.
Design★4:Other Brand:Because the sense of product has been improved.
View detail
Vmax1200.
I got this because it was cheaper than OEM. Nothing wrong with it. View detail
If only we could get past Inner Weight!
I bought YOSHIMURA Rear Sets, so I wanted to make the handlebar part the same gun metallic color, so I installed it myself as a decoration. Once the inner weight was removed, installation was a piece of cake. It looks cool now. The weight will be a little lighter, but it is only 13g, so I don't think it will have that much effect on the weight. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Carbon heat guard
I like it very much. It’s clean and you should know about Yoshimura’s quality!! Very satisfied!! I was skeptical because it was delivered from Japan, but the delivery was fast and the packaging was neat. We Bike is the best. It matches perfectly with the Yoshimura muffler I bought together. The fitting is also accurate and I am very satisfied ----------------- ----------------------------------------- I really like it. You have to know the quality of Yoshimura! I was half-hearted because it was shipped in Japan, but the delivery is fast and the packaging is clean. Powered by Google Translator View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Performance is good
I think it is a necessary product in terms of design, but it also has excellent performance. I think the Magnum muffler is like that. The muffler end body is a bit hot, and the middle connection part is more hot. This is a must-have item if you are thinking about tuning your Magnum. Don't burn your legs ---------------------------------------------- ------------ I think it's a product that I need in terms of design, but it's also excellent. Magnum muffler seems to be like that. The muffler end body is a bit more open and the heat of the intermediate connection area is even greater. It is essential if you are planning to tune Magnum. There is no image of legs Powered by Google Translator View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
Dress-up
I bought this for a dress-up.
Installation is not difficult.
The texture is also very good and very Parenthesis.
The only drawback is that the Gold amount is high,,
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
protect me
It feels like quality and texture information is properly carbonized It's good to protect against the feeling of use against muffler heat Product to purchase together 110A-400-5X50 If you install the Yoshimura muffler, it is recommended to purchase it together The difficulty of installation requires some finger strength It's easy to install from the beginning, but it's hard to install mufflers and carbon cases Cost performance and comparison with other products are expensive... WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing It should be installed when there is no muffler heat, and it is expensive, but if you install a Yoshimura up muffler, it is recommended to purchase it together View detail
Genuine Yamaha Cam Chain Tensioner Gasket for V STAR 950 TOURER
There was an issue witht eh gasket for the cam chain tensioner on this bike as it failed to hold. We decided it was time to get this sorted and buy a brand new genuine Yamaha part to fix. Finding the right part for this was not tricky at all. I just used the tools from the help pages Webike provide and then for my own peace of mind, cross referenced with Yamaha schematics. Really good price from Webike for this and as it is a genuine Yamaha part, I know this will be perfect. I had some other parts in this order and had them all shipped together to save some cost of the shipping. EMS is who I use these days as they just get the job done swiftly. My order arrived in one piece with no damage in 5 days from shipping my order. The parts were all very well packed and perfect. The gasket came in the regular Yamaha packet and also inside a bubble wrap envelope from Webike warehouse. The gasket itself is very well made and is spot on t=witht he tolerances needed. This fixed the issue with the original gasket and now we can sort the rest of the bike so it can get back on the road. Thank you Webike for the great job and providing excellent genuine parts. View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
tool (14mm) opening and shutting
Appearance Tune.
Be careful when applying tools, or Anodized will be bald.
View detail
First of all, Cool.
Throttle operation is not affected at all.
Now it's up to the car inspectors. (Full width)
View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
Just the right Base for the Fender Eliminator
I bought this as a reinforcement for the License Plate of the Fender Eliminator. I wanted to use a slightly larger frame with a red frame, but it interferes with the tail cowl, so I decided to use this frame, which is almost the same size as the License Plate. It doesn't look any different, but it gives me a sense of security as a reinforcement. View detail
Good texture
Large size as the License Plate.
Guard the bend of Number casually.
If you don't look closely, you can't even tell it's on.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
strong, anti-lost
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
For those who want to create a casual atmosphere
I also ride a bicycle, so I have used VansGrip there as well, and I have already experienced its grip comfort (grip strength).
However, the center for Motorcycle has a slightly thicker barrel shape, which makes the grip a little thicker. (compared to the for Motorcycle version).
It is available in a variety of colors, so it is a good choice for those who want to decide on a Casual Motorcycle look as well as the design (VANSShoesSolePattern).
I'm a safe bet. Black." but Brown or Gum might also be good.
Personally, I prefer the type with end flange (stopper) when using Motorcycle, so I am a bad person who is thinking about the next type when I start using this Grip for a while and if it gets worn out, I will change to such type.
View detail