Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .

Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail

HONDA OEM Motorcycle parts Element，Oil Filter 15410KEA305 Review

I fixed this Oil filter for my Hornet 250, genuine OEM product. Delivery condition of the product was at its best. well packed with safety. Im recommending anyone to use this product for who are searching for genuine products for the bikes. Thank you so much Team webike for your superb service! View detail

It is not usable as it is.

I replaced my mc22 94 with this one because it wouldn't stop leaking.
The replacement itself was easy.
However, liquid is leaking from the Drain section.
I thought this might be the case, so I removed the drain bolt and found a seal washer on top of the black paint, as well as a groove on the bolt for a crimp. It was no wonder the bolt was leaking.
The paint was removed with sandpaper and the Bolt and Washer replaced with OEM.

The leak has stopped.
The product itself is solid. But it needs a little work. View detail

I replaced the OEM 10 degrees with this 6 degrees.

When the handlebar is turned all the way to the left, the clutch wire is too tight and delicate. I think it does not interfere with driving, but I am not worried about continuing to use it in this condition. I am worried about continuing to use it in this condition, so I have ordered a special order for a slightly longer wire. It's a hassle! I would like the position to be a little more like a rider's position for city driving. It is now as easy to ride as a CBR600RR. View detail

Sensor

I received a package today. The sensor is the one I would need. BUT!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! -------------------------------------------------- -------- I received a package today. The sensor is the one I would need. AIM!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! Powered by Google Translator View detail

Anyway, it's beautiful.

[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance, and the handlebar was a Sansei RACING Endurance Spec. The handlebar had a Sansei RACING's endurance spec. type separate handle that can be removed in a snap. The angle of hanging is more than 10 degrees. The bar is far from the other side of the Fork. I tried to roam around the neighborhood once, but I couldn't ride it, so I bought this product.
I was looking for a cool type with a bar growing right next to the fork and a hanging angle of 10° or less, and found SUPER NOW's Racing Handlebar Type A to be EXACTLY what I was looking for.

Was the one you received as per Image?
I have purchased SUPER NOW products in the past. I know the quality is good and I received a beautiful Handlebar as per Image.

How was your experience with it?
Positioning has become much easier. Since I usually only work on off-road vehicles, I thought that replacing the handlebar on the separate handle would be a gamble since I did not know if it would interfere with the handlebar or not, but I am very happy that it was successfully installed.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
There is nothing.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grips are standard RossiGrip.
HONDA OEM Grip Left Side (https://www.webike.net/sd/23201784/)
HONDA OEM Grip Right Side (https://www.webike.net/sd/23201783/) View detail

OEM Product Quality NTB of the same etc.

NTB has a proven track record in automotive parts.
The quality is the same as OEM parts, but the price is low and Wallet-friendly.
No problems with installation. View detail

Easy to grip due to its folded shape

I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail

cheap and has a bad finish

I bought ai-net fuel tank cap to replace the old cap that was damaged. The new ai-net cap is cheap and has a bad finish. The new tank cap is raised higher with the fuel tank. View detail

2BL-SC54 is not compatible.

I purchased this product with CB1300SB2019MODEL.
The tank side is narrow and the cap side is wide, and the screw holes do not fit at all.
So I will return it.
I think the quality is good
I would like you to check it carefully before you describe it. View detail

Is there a problem with being thinner than OEM?

I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance. View detail

I am satisfied

It was a replacement for a Reasonable product from another company, but the texture and movement of the actuator were incomparably better. View detail

More rust-resistant than OEM Product

I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail

No particular complaints.

Goods that are consumable and sufficient without the need to buy expensive ones. View detail

FOR CB250F

Better than the OEM one. reasonable price.Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail

Water pump pliers

Even a light press-fit clip can DID be tricky, requiring a press-fit of the plate to create a groove to stop the clip. A cheap chain tool often fails to press-fit the clips properly. If you use a water pump pliers to tighten the 6mm nut to the plate with force, you can get a groove for the clip. I do not want to buy a Stripele for my own use, considering the frequency of use. View detail

It depends on how you run it.

With my current driving style, I was able to run 10,000 km per millimeter. Last time I installed the same pad, but the distance was half of this time because I was driving mainly on mountain passes and mountain roads. This time I drove mainly in town. View detail

Bolt

Bolt rusted instantly, but otherwise satisfied. View detail

At the same time as Inner TubeCoating

I asked the Shop to replace the Front fork cartridge and Inner TubeCoating on my MC51, so I had them replace the SKF at the same time.
Combined with the effect of Coating, Friction loss is reduced to Large range.
Shop people told me that SKF tends to bleed Fork oil, but it is not so bothersome Level when I use it.
It is expensive, but it is effective and can be replaced. View detail

Excellent

i havE used NGK Plug CR9EH-9 7502 spark plugs they are the best for long run.i have used this spark plugs on my honda Hornet 250 1998 model they work very well no maintainance required.best performance.. View detail