It was the best Size for W800.

I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect. View detail

Satisfied with the price, although it is higher than OEM.

Easy replacement and Torque management. View detail

Peace of mind that it is made by MORIWAKI

The peace of mind of being made by MORIWAKI.

I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.

So far, no problems at all. View detail

Fits ZX-4R

It can be attached to ZX-4R without any problem. View detail

seeking peace of mind

I had always been a person who didn't mind if the fins were crushed by the Car Wash Brush, but a lumber fell from the Truck on the Tomei and flew toward us.
Although I escaped the difficulty, I bought it because I couldn't wait to get stuck with something like that.

Well, the product itself. If you don't handle it with care, it will bend." about the same intensity, but my mental anxiety is much lessened.
To use an analogy, it's better to walk around with a piece of cloth than to walk around with a kin0ma hanging around.
・・・ . ・・・ View detail

suitable for gixxer 250

About quality and texture : handlebar material is solid About the feeling of use : solidly supports my handphone and action camera Products to buy together : you will need accessory mounts for your phone or action cameras Difficulty of installation : easy. just remove old bolts and install bolts provided Cost performance and comparison with other products : higher price but worth the good quality About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : this works only on gixxer 250 View detail

Required for Northeast Number.

The grip is so thin and natural that you don't even notice it has been replaced. View detail

Good feeling

The installation was easy and the WeightBalance is just right. View detail

I am very grateful for this season!

My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.

Having said that, I have been able to spend this winter more comfortably than if I had nothing on! View detail

I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between lef

I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between left and right? View detail

Large satisfied

I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail

Reliable

I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance. View detail

DAYTONA DAYTONA Oil Filter

The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail

The heavy weight works well.

I've always put it on every Kawasaki car I've ever ridden,
This is the first time I have installed it on a Honda vehicle.

The product is almost identical, but the Spacer that fits the notch in the connection with the Honda-specific Inner Weight was different.
It was kind enough to include three different Bolts so that it could be installed on SEA BASS cars.

Originally, there was no discomfort from vibration, but after installation, vibration at low rpm was reduced.
First of all, the OEM screw lock agent is hard, so you need to use a regular screwdriver and if it seems to lick the screw, you need to use an Impact Driveretc. If the Bar End of Honda cars are old enough, the Bar End will rotate as you tighten the screw. (No matter how much you tighten it, it will turn. (It is structurally impossible to remove, but if you are worried about it, prepare a screw lock agent.)

The anodized finish is as beautiful as ever, and if you don't like the color, you can change only the Outer. View detail

For the price ….

I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black. View detail

Genuine Honda Oil Filter for CBR600RR 2021

Ok so it's just an oil filter. An oil filter that gets changed through out the bikes life. So, why bother buying really cheap aftermarket ones or the really expensive one when you know the genuine will work perfectly and give a great life span. The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Honda part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS as it gets to me very quickly and the tracking is full, I mean FULL as in every step of the journey. I know exactly when the order will be delivered and apart from once, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape.There is not really much to say about the finish of this oil filter as there is not really much you can see, The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike. View detail

looks nice on smoke/dark visor. It is lighter than the factory bolts for those who really care. total 12.6 grams lighter for the set of 6 bolts View detail

For One point in the License Plate Department!

I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail

FOR CB250F

Actually this item i could not found in my country (Emblem，Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail

FOR CB250F

Actually I could not find this item in my country (Rubber，Dust Seal 24706-MK3-770). Finally I bought it from webike. It is authentic. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail