wonderful (e.g. of a meal) "Spring" ！！

The company's SUS441:SUS441:[Kicks] sweet Spring （I have already replaced the front spring (Rear Suspension Spring), and I feel the performance is good, so I replaced the front spring as well….
The result is still great! It's just Spring. To all of you who are thinking! Please think you've been fooled and try the exchange!
It's easy to turn and it's a whitewash to ride on! Just by replacing the Spring, you can feel that it is a really good Spring! TouringRider is a great recommendation! View detail

Anodized Treatment is beautiful!

Control performance is also unquestionable! It is very durable without breaking! The colors are beautiful and give it a custom look, so there are no complaints! Comes with an easy to understand instruction manual and a nice looking Sticker! View detail

More convenient to add accessories

This short clamp really added flexibility to add accessories. With a wide variety of accessories that is able to mount on this clamp, i now have more options to make my bike more practical and functional. It is easy to install, tip is make sure you label/mark the original master cylinder location so that when you mount it back, it will be on the same original position. As you can see from my image, i used this clamp to install a hazard switch & a USB-C charger+voltmeter. View detail

Reading the Opposite Chanes

I bought this for reverse Change.

Frame cover is not included. Or
Processing is required.

Two holes are convenient.

A little more on the outside would reduce ROD interference. View detail

Race cowl

I purchased this vehicle to make it a Race vehicle.
The delivery time was a bit long.
If you want one, get it soon!

Finished by KDC, a long-established manufacturer
Good. I use it without painting.

The installation has a part to cut and
You need to be careful.

Cut can be done with Cutter.

Seat sponge is non-slip.
It's a cheap one that doesn't exist.

We plan to replace them when they are reduced. View detail

very good. This is excellent in finish and quality

There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail

Engine Protection

I purchased this product for Engine protection purposes in the event of a fall.

I have not fallen over, so I don't know how effective it is.

All you have to do is to paste it with the attached Bond.
It's easy

So far, it has not run and fallen off.

It was right up to the hole, so I sanded it down. View detail

Effective

I was concerned about the Shift error during Downshift.
Purchased

For the price, it works.

If the part where the Shaft goes in is Bearing.
I think it is better.

Installation is in accordance with the Instruction Manual.
It is easy if you do it. View detail

Already the third one.

Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail

Couplet-on

Exhaust System was replaced to increase intake efficiency.
Installed.

Reasonable Sub computer.

Because it has been converted to a Race vehicle, the Cowl can be removed and attached quickly.
It did not take long.

It is just like interrupting Coupler and connecting them.
The Instruction Manual is also Small size, but if you read it carefully, it is Large sturdy.

I put it in the Tail cowl, but it's a Small cowl.
Limit.

Installed along Harness.

The error signal Lamp is also an Option.

Personally, I don't think I want it.

I thought it was a good idea, so I didn't wear it. View detail

Secondary Air Cancellation

This is a Kit to do secondary air Cancellation.

It is easier to work with if the Radiator is shifted.
Be careful to check the orientation and Gasket of the Valve you removed.

When you take it off and put it back on, what?
I thought I was in the clear, but I had the Manual.
I was able to install it.

It seems that removing Wiring causes an error, so I removed Hose.
Coupler remains connected.

The only weight reduction is the Hose part. I hope the exhaust efficiency will be improved!

Race vehicles and cannot be driven on public roads. View detail

Brake works.

Replaced the Disc Rotor with 45,000km on it, and wondered how Brake works like this? But right after the exchange ? but it's expensive. View detail

unusual

It's really changing. It's getting faster. It's so much easier. View detail

well prepared means no worries (in time of need)

It is safe to have it as a spare in case of Chain replacement. View detail

Used for Z250SL

Used for Z250SL There was an indication of compatibility with Ninja250SL but no mention of Z250SL.
Connect under the tandem seat. View detail

I'm generally satisfied!

I purchased the L Size for my CB250R for about half the list price.
The compatibility chart lists CB250R as L Size, but in reality I felt that the Motorcycle Cover was a little short in overall height.
Specifically, I am worried when there is snow on the ground because I can see a little of the Wheel in the back as shown in the photo. (I guess I am too nervous).
The front Wheel is also hidden when the Cover is extended all the way to the end, but it may shift and stick out a little in wind or other conditions.
For now, we decided to wait and see until spring.

However, we are otherwise satisfied with the Large change in use.
I especially like the waterproof and moisture-proof feature. I used to use their Motorcycle Cover Kizuna on my previous Motorcycle, and when I compared the product descriptions on the Package, the only difference is that it has a flame retardant finish, but the flameproof Motorcycle Cover Kizuna does not allow water to seep through to the Cover in normal rain, and I felt that it has a higher moisture-proofing function. However, I felt that the flameproof Motorcycle Cover Kizuna has a higher moisture-proofing function. (This may be the difference in the number of years of use.)
We recommend buying the fireproof bond because there is no LARGE difference between it and the unbranded bond at the current Net price. View detail

YOSHIMURA Oil Filler Cap Type-FB

Quality and texture information Aluminum clean products be marked nicely for use Product to buy together o-ring It's easy to install Cost performance and comparison with other products Spotgawa products give o-ring but not yoshimura WeBike packaging is always great, arriving in a week for delivery and packaging There are no concerns, precautions, or advice when purchasing except for not giving a specegawa oil cap and o-ring It's just different in appearance from the brand marking View detail

Good goods!

It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail

Cheap but reliable.

I sometimes hear that external Stainless Steel Mesh Hose has lost its caulk, but this product is made of OEM material.:It is manufactured by NICHIRIN, TopShare of RubberBrake hose, and all products have been inspected.
It is not only reliable, but also cheaper and more cost-effective than other companies' products.

Even if you use it to replace the brake line of an older vehicle that is no longer supplied by the OEM, you can be assured of the same quality as the OEM, and you can also get the tight touch that is typical of Stainless Steel Mesh Hose. View detail

Wiring is Limit...in a way it fits.

This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch. View detail