Reviews
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
It is a regular replacement.
I have been using it for almost 2 years now and it is starting to get holes in places, so I decided to replace it. I always buy cheap ones, but this time I chose Black. I am glad that it is not noticeable at night. I wonder if the color will change after another 2 years or so due to tanning. I used black once before, but the color of the black one changed considerably due to tanning, so I will see how it goes this time. The cheap ones are good enough to use. I have used Black once before, but the color of the Black one changed a lot after tanning, so we will see how it goes this time. View detail
Exhaust System has a surprisingly large number of situations where it must be removed.
It is comparable to OEM. I will keep a few of these. View detail
I'm reminded once again that this is a well thought out component.
Where do you put your feet when you ride the Motorcycle?
FOOTPEG.
This time, replace the Cover on the footpeg and the Footpeg Rubber.
Motorcycle footpeg
The footpeg, together with the handlebar and seat, is an important part that determines the riding posture when riding a motorcycle. 。
While riding, the theory is to hold the motorcycle with both legs, and then clamp the body between the knees (called "knee grip"). 。 By bearing the weight of the motorcycle from the waist down, you can control the motorcycle to a certain extent only by shifting your body weight.
→That's why you're riding with both feet on the ground, taking the center of gravity with you.
Of course, the act of riding a motorcycle would not be possible without it. It is indispensable.
And where to put the footpeg, depending on the individual.
...basically. A little behind the base of the thumb. The tip of the Boots should not interfere with the Pedal. 。
When it comes to →, the ride is also affected by the footpeg Material.
Material used for footpeg (Rubber)
■ Material:Rubber (Steel is in the bottom)
The thick walled design is mainly used for Classic type cars. Thick and resistant to vibration. However, since it is rubber, it will be worn out and the quality of the rubber will deteriorate after many years of use.
■ Steel
The knurl has a non-slip effect. It is slender and has excellent sports performance such as bank angle.
Rust leaves.
Duralumin
The main use is for external Rear Sets, etc.
Lightweight, strong, and resistant to corrosion.
For →estrella, Material:Rubber.
The reason may be the appearance of the Classic, but I think it is also a vibration countermeasure due to the single-cylinder nature of the engine.
When I was test driving the other day, I felt a large vibration coming from the bottom of the footpeg. I looked closely and found that the rubber on the footpeg was worn out.
Replacement procedure.
(1) Level the vehicle body with Center Stand or Jack.
↓
(2) Material attached on top of Footpeg:Cut and pull out the Rubber footpeg with Cutter.
↓
(3) Clean the removed footpeg with Parts cleaner.
↓
(4) Apply a thin layer of adhesive (◎ for shoes) to the footpeg, and press the footpeg rubber firmly into the footpeg until it reaches the edge.
↓
(5) Dry overnight.
As for the effect, vibration has been eliminated considerably.
And I felt again like a surprisingly non-slippery Material, something I had not felt before.
If you are going to be touring for a long time, you may want to take measures against vibration, right? Although it is a basic measure, replacing the footpeg rubber is quite effective.
View detail
for KAWASAKIOil Filter
The exchange was also Smooth.
The price is cheap and helpful.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
For THRUXTONRS
OEM replacement for Triumph is not available, but if the OD and internal Screws match.
Can be installed. Always change Oil and Drain plug Magnet
This product gives me peace of mind when I look at it and worry about all the iron dust.
Overall length is slightly longer than tiger OEM, but no problem for installation.
Expect filtration capacity
View detail
Purchased for a 12 year MODEL ninja 1000
This is the first time I have used this Drain Washer.
I used to use Drain Washer purchased from Motorcycle shop, but I bought it because I ran out of stock.
I don't think it's a problem since it's OEM, but just to be sure, check the area around the Drain Washer after test run after replacing the Oil.
It didn't leak, so it's Large sturdy.
OEMs are secure.
View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
Repeat Confirmation
Reliable DAYTONA Oil Filter with Packing.
The price was on the low side, so I'm sure I'll be buying more in the future.
View detail
Satisfied
I was worried about RedPad, but this time I bought GoldenPadX because it was cheaper!
The BrakeTouch is now better and very easy to drive.
I was concerned about the brake performance since it is a single disc, and after replacing the disc, I was able to solve the problem and get a very good price.
View detail
PetitCustom
VERSYS has the Label stopped Rivet on the Frame in some countries where it is sold,
It is not attached for Japan and the mounting holes are blocked with Rivet.
I found this product on the Net and after researching it, I found that the hole pitch seemed to match, so I purchased and installed it.
Fastened with a 4mm PopRivet.
View detail
Trust and Security
[How is it used?
For box mounting
Was the one you received as per Image?
Same as for other car models.
It's solid
Was the installation difficult?
It may be easy or difficult, depending on the type of car,
For W800, the difficulty level would be about "medium".
How was your experience with it?
The firmness of the product is far superior to other companies' products.
There is a sense of security when the Box is attached.
The only concern is that the top surface of the Carrier is one step higher than the Seat Surface.
If possible, I wanted it to be truer like KawasakiOEM.
[Included Parts:were they on?
Spaceretc. and everything necessary for installation is included.
View detail
I want to use something a little better.
I haven't used it yet, but it looks like a bit of a good Filter, so I bought it.
Package was changed from the image to a box.
View detail
Brake Pads for Street Riding
I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
add-25r Use BlackMotorcycle Cover 3L
[How is it used?
Motorcycle Cover in Garage
Was the one you received as per Image?
As per Image
How was your experience with it?
It is easy to apply.
[Points to note]
Be careful with Exhaust System after driving or when it is hot.
How did it compare to other products?
The delivery time is fast and the price is good.
Other items that would be helpful
Installation Point or hang
This size is just right with SeatBack mounted with zx-25r up on Motorcycle stand in front and back.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
DAYTONAChain beware!
Chain hole is too small to fit Daytona's Chain. View detail