Reviews
A well designed product that integrates into the factory engine case to add a useful feature
About quality and texture - The drain bolt with magnet from SP Takegawa is made from billet aluminium with precision machining and a red anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The drain bolt with magnet is a well designed product that integrates into the factory engine case to add a useful feature that helps with engine longevity by removing unwanted metal from the oil. Products to buy together - A key product to buy together with the drain bolt with magnet is the SP Takegawa LED temperature guage that will allow for monitoring of the engine oil temperature to ad further longevity of the engine. Difficulty of installation - The installation of the drain bolt with magnet is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the drain bolt with magnet to the engine case. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the drain bolt with magnet is priced higher this time round. The design of this drain bolt with magnet with it's sensor hole is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail
Cosmetically good.
This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail
It's cosy.
I think the quality is the same as OEM etc. I don't know about durability yet. View detail
Fits: HONDA Grom (MSX125), HONDA APE, HONDA DREAM50, HONDA MONKEY, HONDA GORILLA
Compatible with KITACO clutch covers.
It has been about 6 months since I replaced the clutch cover with a KITACO clutch cover. After two oil changes during that time, the oil filter was finally replaced.
The work itself is easy, but it is good to protect the filter with dustcloth or something similar because the oil drips quite a bit when the filter is removed.
The removed Filter was quite dirty.
I wish I had replaced it a little earlier.
So, we will continue to confirm Repeat in the future.
View detail
Perfect
Quality and Texture Information Lightweight with Aleuminum I think it'll be nice and serve as a guard for the feeling of use Product 498-1300100 to purchase together It's difficult to install The cost performance and comparison price range with other products are similar. You can choose your favorite brand Delivery and packaging to WeBike in a week The packaging is great 2 concerns when purchasing is 1 set You have to buy 2 sets View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA DIO, HONDA LEAD, HONDA DAX, HONDA PCX, HONDA MONKEY, HONDA C110, HONDA GIORNO, HONDA DIO CHESTA, HONDA GORILLA, HONDA TODAY, HONDA CRF50F, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA SUPER CUB70
Low profile parts...a blind spot.
The circumstances of the exchange,
It seems like the oil is getting low ? There is a lot of white smoke coming out of the exhaust system. I can understand if it is right after starting the engine in winter, but the white smoke doesn't disappear even after the engine is warmed up.
[Symptoms of Oil drop]
▲ BlueWhite smoke is emitted when Engine RPM is low.
▲When the Engine is stopped for a while and then started, White smoke is produced.
White smoke is produced when the Engine speed is increased after Idling for a while. 。
→ This is exactly what it is.
[Cause of Oil drop.
‥
(1) Valve wear
Damage due to age-related deterioration
Expansion and contraction due to temperature change
Deterioration due to dirty engine oil
→?Hardening of Stem Seal Suspect damage due to age-related deterioration.
Because... Stem seals are rubber, and I thought they would deteriorate (laughs).
Valve stem seal
The Valve stem seal is attached to the valve guide in the engine head and prevents engine oil supplied to the head from flowing into the combustion chamber through the sliding surfaces of the valve stem and guide.
Valve stem seal inside the cylinder head.
[Deterioration over time].
→Valve stem seal will not adhere to Valve Stem over time 。 When the oil level drops, the consumption of oil increases, resulting in poor engine performance due to lack of oil, abnormal noise, and in some cases, overheating and seizure.
White smoke and odd odors also appear, the first symptom listed. →That's what this is (laughs).
This replacement is an OEM Stem Seal.
procedure
First, remove the Dynamo cover to expose the Flywheel. Similarly, remove the side cover of the Cylinder head.
(2) Align the notch on the Crankcase with the top dead center mark (T) of the Flywheel and the 0Mark of the Camshaft Sprocket with the notch on the Cylinder head.
If it is difficult to match the tensioners, remove the bolt that is holding the tensioner tension of the camshaft chain tensioner and bleed off the hydraulic pressure.
Remove the locker arm, remove the camshaft, remove the valve spring using a valve spring compressor, remove the stem seal, and replace it with a new one. 。 After installation, use the Thickness Gauge and Tappet Adjust Wrench to return the Tappet clearance to the proper setting.
(5) Assemble the unit in the reverse order of disassembly. Finally, the amount of oil is checked and replenished before starting.
Effect after replacement
......White smoke has disappeared and the exhaust Gas smell has been eliminated!
It is not a part that comes out from the outside, so it is not an easy part to replace, but please check it when you overhaul the Engine or Cylinder head.
View detail
If you want to Bore up with Normal head, by all means.
Bore up + High Camshaft seemed to be perfect, but... ?Tappet sound is annoying.
?The RPMs are not as high as expected.
Why? I found out that the Spring of Valve is not good if it is set to "NORMAL", so I will replace it with &arrarrr;Reinforcement Type.
What is the role of Valve Spring?
Valve springs keep intake and exhaust valves constantly pressed against the valve seat of the cylinder head to prevent leakage from the combustion chamber.
The Valve is pushed down by the Cam, but when it returns, it does so with the force of the Valve Spring. The Valve must follow the movement of the Cam in order to produce a stable output.
The valve opens and closes once per cam revolution, making one round trip up to the largest lift. When the Valve Spring can no longer withstand the load (in reality, there are also problems with frequency), Surge-ing occurs and the Engine stops turning. In the worst case, the Valve or Engine will be damaged.
Surge ing When Valve does not follow Cam when the rotation of Engine is increased and Valve vibrates with unintended Timing.
Why do bore up cars need Reinforcement Springs?
If Valve Spring is NORMAL, Surge-ing is likely to occur at high rpm when using high rpm with High Camshaft. By the way, if you strengthen only the Valve Spring on the Normal cam, it only becomes resistance, but there is no Merit.
[Strengthening Valve Spring].
Literally, the Valve Sub Ring hardens itself. (Increases load-bearing capacity.)
Simply put, the Valve Spring Rate is increased to withstand higher loads at higher RPM.
[Effect]
When the Valve Spring is strengthened, the Cam pushes down the Spring, so the Engine Friction is increased. This will suppress the valve jump that tends to occur at high RPM range.
good point
◎No snagging up to high rpm and runs cleanly and without loss.
◎Tappet sound became slightly quieter.
◎They can maintain high rpm even on hilly roads.
◎for STD Head.
A bad point
▲Recommendation will not be made for Single Item replacement. Please do it by Overhaul around Head because it involves removal &arrarr;Valve removal/attachment, etc. of Sealinder Head.
The tool called "Valve compressor" needs to be prepared.
When the engine is running at high RPM, the Valve Spring cannot expand and contract in time with the Valve movement, causing ValveSurge-ing. 。 Reinforcement springs have stiffer springs, so they can be eased to some extent.
It is quite time-consuming to replace, but it is effective.
Whether you are going to do it yourself or ask the Shop to do it for you, we will recommendation!
View detail
good stars
Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.
The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original. It works clearly.
----------------------------------------------------------
The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly.
The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly.
Powered by Google Translator
View detail
No good!
The union of KITACO's 8Inch2.5 and the new Crab interferes with Caliper and Wheel, making them unusable.
The instruction manual is not very helpful.
View detail
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Springs for front shock absorbers
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain stock. Fits great, quick installation. I recommend to everyone. Favorite Webike, buy more of these springs - my friends want to order them too, but there are few in stock. Thank you and it is possible to buy such a product.
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain in the drain. Fits perfectly, quick installation. I recommend it to everyone. My favorite Webike, buy more of these springs - my friends also want to order them, but they are few in stock. Thank you and it is possible to buy such a product. -------------------------------------------------- -------- I decided to serve and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything remained in the stock. It is perfect, fast installation. I recommend to everyone. Favorite Webike buy more than these springs - my friends also want to order them, but they are not enough. Thank you and it is possible to buy such a product. I Decided to Service and Update the Springs on the Front Suspension of My Honda Monkey. I took The Standard Size so that event Would Remain in the Drain. Fits Perfectly, Quick Installation. I Recommend it to EVERYONE. My Favorite Webike, Buy More of these Springs - My Friends Also Want To Order Them, But They Are Few In Stock. Than you and it is Possible to Buy Such a Product. Powered by Google Translator
View detail
Required if Bore up.
When the engine displacement volume is increased by bore-up, the scale of explosion becomes larger than that of the OEM, and the oil pump designed for 50cc of the OEM cannot keep up with the oil circulation. Therefore, we introduced the Reinforced Oil Pump.
[Oil pump's role].
The oil pump pressurizes and pumps the engine oil to circulate it to the various parts of the engine. 。 This enhances lubrication, cooling and cleaning effects.
[What happens due to lack of Oil circulation.
→ oil film breakdown and increased oil temperature.
The oil pump sucks up engine oil that has accumulated below the waist and circulates it above the waist. (The oil then flows back into the lower back to continue circulation.) Cylinder Cylinder head Camshaft Piston Therefore, if the oil cannot circulate properly, there is a possibility that these parts will break. To explain this in a simple way, if the oil film on the parts runs out, the parts will be damaged and the oil will be lost. [Burns in] it appears as if ... 。 Naturally, parts that are seized are unusable and must be reassembled.
Effects of Reinforced Oil Pumps
Circulation of the proper amount of oil reduces the burden on the parts of the drive unit. 。 Also, by increasing the Engine Displacement Volume, a larger volume of oil can be circulated to the engine, which generates more heat and thus cools the engine even more.
*OEM oil pumps are designed for OEM for 50cc, so if you bore up, you will have to reconfigure the oil pump with an enhanced (higher discharge) oil pump to match, or the oil will not be circulated in time.
This Oil pump has a capacity = amount of Oil to send 。 If OEM Product is diverted, the capacity will be as follows : Assuming that 50cc is 1.0, it is about 1.8 to 2 times larger.
good point
Heat generation from the Engine after driving has subsided.
Even if you go for a long ride and turn it around a bit, there is no longer any heat drop.
Idling is stable.
A bad point
I also removed the oil, removed the →clutch cover, and replaced the →gasket.
It's worth changing, though (laughs).
When you bore up the engine, it is strongly recommended to install a Reinforced Oil Pump. If you are looking for a domestic manufacturer, SHIFT UP is the cheapest.
If the Bore Up Kit you purchased becomes useless because you were too stingy with the Gold amount, the cost will be large…. 。 Some of you may have assembled the Bore Up Kit with the NORMAL oil pump, but it is not a stingy PARTS, so I recommend not to drink that opinion too much.
If there is room, it would be even more effective if the orifice of the oil coming out of the oil pump is enlarged.
View detail
Perfectly sized for reduced hose size engine breathing applications
About quality and texture - The hose connector from SP Takegawa is made from a hard plastic material with a transparent white finish and the quality from the overall fit and finish is perfect. About the feeling of use - The hose connector is perfectly sized for engine breathing applications where you have a regular sized hose that is required to be reduced to to a smaller hose for your small barbed hose fittings on your oil catch tank or air filter pod, which I have both of on my Honda Monkey 125 but is only to be used with air systems and not oil or fuel. Products to buy together - The hose connector does require to be firmly secured to the breather hose, the use of zip ties is not my preferred method as a permanent solution so the use of specifically sized 9.5mm and 13mm hose clamps from SP Takegawa is what I would recommend. Difficulty of installation - The installation of the hose connector is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use a basic hand tools is what is required. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hose connector is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the hose connector, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Necessary thing
Защита маятник нужная вещь. По просьбе друга купил ему . Она прекрасно подошла на его Honda Monkey. Теперь он доволен и радуется использованием. Отличная недорогая вещь. Рекомендую всем.
The pendulum protection is a necessary thing. At the request of a friend , I bought it for him . It fit perfectly on his Honda Monkey. Now he is happy and enjoys using it. A great inexpensive thing. I recommend it to everyone.
----------------------------------------------------------
Protecting the pendulum is the right thing. At the request of a friend, I bought him. She perfectly approached his Honda Monkey. Now he is satisfied and rejoices in use. A great inexpensive thing. I recommend to all.
The PENDULUM Protection is A Necessary Thing. At the Request of a Friend, I Bouught it for Him. It Fit Perfectly on His Honda Monkey. Now he is happy and enjoys using it. A Great Inexpensive Thing. I Recomment it to EVERYONE.
Powered by Google Translator
View detail
Super plug
I've been dreaming about this detail from Kitako for a long time. It seemed like it was missing from the Honda monkey. Beautifully crafted from aluminum, installation takes minutes. Now this part of the semolina has acquired a finished and laconic look. I recommend to buy.
I've been dreaming about this Kitako part for a long time. It seemed to be missing on the Honda monkey. It is beautifully made of aluminum, installation takes a few minutes. Now this part of the semolina has acquired a complete and concise look. I recommend it for purchase.
-------------------------------------------------- -------- I have long dreamed of this detail from Kitako. It was not enough for Honda Monkey. Greatly made of aluminum, the installation takes a matter of minutes. Now this part of the semolina has acquired a finished and laconic appearance. I recommend buying. I've Been Dreaming ABOUT THIS KITAKO PART A LONG TIME. It Seemed to be Missing on the Honda Monkey. It is Beautifully Made of Aluminum, Installation Takes a Few Minutes. Now this Part of the Semolina Has Acquired a Complete and Concise look. I recommend it for purchase. Powered by Google Translator
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Bore up to 85cc
Bore up from 75ccBore up to 85cc.
The aluminum material used for the cylinder gives it a more luxurious look and feel.
I can't comment on durability, as I don't know how long it will last, but I think it is sufficient as a bore up that can be done with a normal head.
View detail
Genuine Kitaco Camshaft
After a lot of thought and help from elsewhere, the camshaft was found to be needing a replacement due to incorrect storage and so the fun began. Finding the right camshaft was pretty straightforward, there are a lot of spare parts available for these bikes which makes my life a lot easier. The price for the camshaft was a real bargain and if I had to replace from the UK parts, it would be at least double the price. So, along with a few other parts for the project it was added to the basket. My order was shipped all together via EMS and arrived in 5 days from being shipped from Webike warehouse. The box arrived in perfect condition and was filled with bubble wrap to keep everything safe. The camshaft is truly an awesome piece of machinery. This one is far beyond what I imagined to get. I have never purchased Kitaco parts before but these are definitely the way to gofor thos project. The cams are all nicely machined, the bearings are sound and pretty much a plug and play. Very happy camper View detail
Genuine Kitaco Complete Piston Set
Along with some other parts for this mega rebuild/project bike. The pistin was shot due to not being stored correctly and was eroded in places. Not to worry, I found the right piston set pretty easily and the price was to be honest, amazing for what you actually get. The cost of shipping was really good value too which made my life a lot simpler. I did have a few other parts ready for ordering and got them all shipied together with EMS and my order arrived in 5 days. The box my order came in was well padded and nothing got any kind of damage in transit. The piston set comes with the piston, the rings, circlips and the gudgeon pin so all you have to do is fit it and away you go. The piston is weel made and I had no issues fitting the rings which had enough flex to negotiate the piston correctly. All together, very pleased with this purchase and an absolute bargain too. Thanks Webike, very happy View detail
exchange
I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful.
View detail