7 Days to go 7887 km!

As per usual, not only was it less expensive to buy and ship from WeBike, it came packed very well in a nice WeBike box! If you are from North America or in other parts of the world don't think twice about buying from WeBike. Every one of my many purchases have been very positive. That and the selection is great! View detail

Barrel-shaped without being too flashy.

I wanted a Barrel Style Grip Pierced Type and purchased it. I have been using it for several months without any pain in the rubber or any problem that affects the accelerator operation.

Since it is not a blatant barrel shape but a casual bulge, I don't feel that the Large grip is different compared to the Grip with a straight line design. It is not a barrel shape, but rather a subtle bulge. Still, the Fit feeling in the hand is comfortable. View detail

Cospa best

Inexpensive and perfect quality
Safe to use View detail

Response improved!

The tanks can only be removed and attached by shifting the tanks, so it is suitable for people who have done a lot of work on them!
However, considering the price, I think it is a recommendation replacement work if you can ride comfortably by replacing the Ignition coil earlier than the Manufacturer replacement distance. View detail

An extremely popular choice when looking for a very comfortable grip at an affordable price

About quality and texture - The soft rubber doctor grips from Kijima are made from rubber and with a simple design and soft surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The soft rubber doctor grips are an extremely popular choice when looking for a very comfortable grip at an affordable price. All round better grip then the original Honda Grom grips with a focus on comfort due to their shape and the material used. Products to buy together - A suggested product to purchase with the soft rubber doctor grips would be a heavy set of bar end weight to further increase comfort by removing addition vibration from the handke bars. Difficulty of installation - The installation of the soft rubber doctor grips is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the grips to the handle bar and thottle tube. An air compressor if available will ad in the removal of the original grips with ease. Cost performance and comparison with other products - I find the cost of all the products Kijima sell to be great value when compared to what most other companies sell their products for and the soft rubber doctor grips are no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the soft rubber doctor grips, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

Maintenance.

I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL! View detail

Genuine Yamaha O-Ring Seals for FZ1 2008

These o-rings were also part of the water pump rebuild on the 2008 FZ1 which needed attention due to the age related parts not looking great. Finding the right O-Rings was sumple as I already had the Yamaha schematics for the water pump open. There are 2 of these same o-rings but have different item mnumbers although they are the same part number. With the other parts in my order for the rebuild, I had EMS ship them al toghter to save on shipping costs. The entire order arrived in perfect condition and well packaged in 5 days. Th o-rings were individually packaged in their own Yamaha pouch. They are flexible but also strong as they do need to be. Never any doubt when it comes to Genuine Yamaha parts. They are well within the specifications for the o-rings and time to continue the rebuild to get this bike back on the road. Thanks for the hard work you do Webike, much appreciated. View detail

Casually Parenthesis better.

You will be satisfied with the results you get.
Care must be taken with the Radiator Cap during installation.
Depending on the type and orientation, there may be interference. Push rivet was used to attach the front cowl. To avoid contact wear, a thin rubber plate was inserted as a cushioning material. View detail

Lighter than OEM, texture is comparable to OEM, slightly less visible

NINJA400 (2023) I installed it in
The fit is perfectly fine.

It is shorter and lower than OEM and looks better.
Rearward visibility is slightly inferior for this reason, but it can be managed with some adjustments.
(The field of view will be wider, so the result will be toned or slightly harder to see.)
near (near directly behind) Do not do this if you are afraid that it will be difficult to see the
This is for people who have or can have a Habit to make sure they have a good visual check.

So far I don't notice much loosening at high speeds or blurring from vibration.
(OEMs are better in comparison). View detail

For THRUXTONRS

OEM replacement for Triumph is not available, but if the OD and internal Screws match.
Can be installed. Always change Oil and Drain plug Magnet
This product gives me peace of mind when I look at it and worry about all the iron dust.
Overall length is slightly longer than tiger OEM, but no problem for installation. View detail

PetitCustom

PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color! View detail

Standard PetitCustom

For Caliper's color insert!
Trial installation before putting brembo in.

4mini standard color:?? View detail

Small

I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail

Fine Alloy 55 (Fine alloy) Brake Pads

Compared to other companies' pads, when the front brake is applied, it works much better than before. View detail

Genuine Yamaha Hose 5 for FZ1 2008

This was yet another part that is for the rebuild of the FZ1 2008 which was looking a bit tired with the almost 20 year old OEM parts. Although they were not particularly damaged, they made the bike look older than it is so new ones are essential. Finding the right hose was easy as I already had the Yamaha schematics for the previous pipes and hoses needed. The cost from Webike was great and far better than I could source locally. With the other parts I need for this rebuild in the same order, I saved a little on the shipping too which also helped. Via EMS my order was delivered in 5 days from shipping and was very well packaged and padded out so no damage was incurred. The hose 5 is a smaller diameter hose than the previous hose 1 I also purchased but it is also an inner braided hose as it needs to be robust and strong. The original bend fits perfectly with the pipes and along witht he clips I also purchased, the rebuild is cvoming along nicely. Thanks Webike, great job guys. View detail

I like the texture.

CB1300SF, LLSize is just right, Spec. is a little different, but I bought Repeat of the same product. The front and rear tires are also hidden to the bottom. The holes for the front and rear tire locks are thick enough to fit. The back is now black so it is easier to put on. The fabric is thick and durable. The one I used before could be used for 4 or 5 years, but I can't put it on while the exhaust system is hot, so I put on the small one after an hour. I have used other manufacturer's products, but I want to keep my Motorcycle in Large size, so I think I will repeat this next time. View detail

Genuine Yamaha Hose 1 for FZ1 2008

This is another part of the pipe and hose rebuild for the FZ1 which was looking a little tired with old parts. This one was the hose 1 which attaches to the pipe 1 I also have in this order. I found the right hose by using the Yamaha schematics and searching through Webike website. The pipe was very good value for money and a lot cheaper than could be sourced locally. With all the other parts for this rebuild in my order, I had them all shipped together via EMS and the order arrived undamaged in 5 days. The packaging for this order was perfect and very well padded out to stop any issues. This hose 1 is a internally braided hose as it does need to be very strong and robust for the purpose needed. It is well made and is the perfect diamter as needed for the job in hand. Not really much I can say about this pipe 1 but standard Yamaha quality throughout. Can't beat that for peace of mind. Thanks Webike. View detail

To change the oil.

Purchased to replace Element along with Oil replacement.
It was well made and worked fine. View detail

Genuine Yamaha Pipe 4 for FZ1 2008

This was another pipe that needed replacing on the FZ1 which was looking a little tired with rusty pipes. The pipe 4 was not hard to find as I used the tools Webike provide on their help pages and then cross referenced with Yamaha schematics for my own peace of mind. The pipe 4 is one on the outer side so it does get a lot of road debris and rain so it was only a matter of time really. The pipe 4 was very good value and a lot cheaper than my local Yamaha dealer could sell for. With the other parts in this project in the same order, it was all delivered by EMS and took 5 days to arrive. The pipe was well packaged and surrounded by bubble wrap to keep it safe. The pipe itself is well made and is finished off in satin black Yamaha paint which is flawless. All the pipe ends are perfect with no damage. I did order all the accompnying o-rings and rubber pipes too and now I just have to put it all back together. Nice work Webike, thank you. View detail

TZr50R Water pumpDrain washer

[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This product is a Water pumpDrain washer.
Note that if this Copper Washer is ruined, it will lead to coolant leakage.

How was your experience with it?
The OEM parts have been used without any problems.
No coolant leakage.

How did it compare to other products?
No comparison can be made because there is no external company.
However, since it is also a regular Washer, it may be compatible with other moped etc. Parts.

[Points to note]
Note that once attached, it will be replaced the next time it is disassembled. View detail