Reviews
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Generally satisfied, although there are reasons for the low price.
The DAYTONA WaterRegistrant I was using on my 2019 Z1000 is now over 4 years old and falling apart from the quicksand, so I decided to try a different Manufacture next.
The evaluation is based on the comparison with DAYTONA's Cover, but the large size of the Cover can fit in the LLSize Z1000.
The material is a bit flimsy, and it is hard to say how durable it will be until it is used for many years, but I have the impression that the price is appropriate in this area.
The front and rear cover has the same locking holes, but the front wheel hole is much closer to the front, so you have to lock it at the very front.
I think it is good that there is an air hole to release moisture in the Mirror section, which was not available in DAYTONA. When it rains, the humidity inside the Cover unexpectedly rises, and since it cannot escape, the inside gets wet too.
In general, the quality of the product was generally satisfactory for this price with good cost performance, although there were some price-appropriate parts.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
Generally good.
I used a Cover in the $1,000s and it was so thin that it had a hole in it after six months.
The thicker, $2,000s Covers are too thick and scratchy to STIFF and BODY.
DAYTONA products are being used for CYGNUS, and they are small as per the Review.
This time Doppelganger decided to purchase the Side fastener because it is easy to install.
A little large for 600RR because of SSUniversal.
It is possible to squeeze in Band, but Band installation is a pain in the ass.
The wire lock hole is too small to feed the keyhole into the cover.
The fabric of Cover is thinner than expected.
Easy to remove because of handles in each section.
Durability remains to be seen.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Unika Kogyo BlackMotorcycle Cover
I was looking for a motorcycle cover for my MT25 Yamaha Motorcycle Cover, which I had been using for many years, but it was torn due to age-related deterioration.
I chose the size L L and wondered if it was too large. I thought it might be too big, but it was JUSTHit.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Enough where there's a roof over your head.
I bought it because it was on Sale.
Slightly thinner than expected, but not completely waterproof type, so it is sufficient under the roof.
Large front and rear locking holes are easy to use.
There is a Strap in the Center that can be closed and used.
Good for people who don't like the visible Type, as it goes all the way up to the Tire.
Nija400 and LL is about as roomy as you can get.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Too easy to put on and take off.
If you squeeze the bottom first. The rest was easy to put on and take off with a zip!
It's really easy:??
I am also happy that I can hang it right away without any problems!
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
Attachment and fit is superb. Security is.
[How is it used?
...Purchased on October 5, 2023 for about 1 month. With rainfall
Was the one you received as per Image?
The product is exactly as shown in the image.
How was your experience with it?
As described in the product description, the cover is easy to put on and take off thanks to the large opening SIDE.
Since the vehicle can be checked only by opening and closing the SIDE zipper, I feel that it is easier for uninformed people to check the inside of the vehicle compared to the Cover, which is completely covered.
As the claim of "Fit", it covers from Mirror to Tire completely and just right.
Black, so a little dirt is not noticeable.
Resistant because it has not melted even if Cover is applied immediately after returning home.
The puddling of rainwater between Mirror and Stem that occurred during Y’S GEAR did not occur.
I need to fix the anti-slamming Belt at the bottom, so I have to bend down and stretch my arms. At that time, I am afraid of contact with the Exhaust System.
Fastener easily chews through the Orange fabric covering the fastener, so be careful.
Not rated because I am of the school of thought that locks do not go through Cover.
[Points to note]
Avoid contact with the Exhaust System when installing the Belt buckle.
How did it compare to other products?
*Comparison is Y’S GEAR, which was repeatedly used on a yearly basis. (YAMAHA) :Motorcycle Cover E Type (https://www.webike.net/sd/24026744/)
Attaching and detaching the Cover is easier and less time consuming with this product.
The front and rear strings can be pulled to secure the device in place. This product is mainly mentally scary.
Fit feeling was better with this product, and the weight of the water did not cause puddles in parts of the product to dip under the weight of the water.
The thickness is thicker and seems to be more durable.
The price of this product is often less expensive when discounts are taken into account.
The manufacturer that sells the Cover has the same appearance (Silver base with Blue front, etc.) for various targets such as Scooter, but this manufacturer sells only this Cover with the exception of the Inner, and it seems that this manufacturer's Cover has no security function that prevents identification of the vehicle type. However, this manufacturer sells only the Cover, except for the Inner, and the Cover of this manufacturer does not seem to have a security performance that does not allow the user to identify the model of the vehicle.
[Opinions and requests to Manufacturer
I would feel more comfortable if you sold Covers for various types of motorcycles, not just sports type motorbikes. (https://www.doppelganger.jp/product_list/cover_motorcycle/)
The ease of attachment/detachment and the fit of the vehicle are highly satisfactory as described in the product description. On the other hand, the ease of attachment/detachment and the fact that the security performance is inferior to other Covers due to the narrowing of the vehicle in the Cover state are a little scary.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Covers are all the rage now.
Easy to install, well thought out. Expect durability. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
A slightly better one.
I have been using a cheap Chinese one I bought from Amazon.
I used to have to put on and take off the cover for a LARGE amount of time, and in the summer, I was sweating before I left.
This makes it a lot easier than those. It's also flame retardant and seems to be Large sturdy even if you don't wait a bit to apply it (for now).
Anyway, I don't want to go through the process again of applying Cover, putting my hand under the Motorcycle, applying Buckle, and so on.
However, I wonder if the holes on top of the Cover to release moisture are functioning properly.
I would like to see more products like this from other places to compete.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
I'm hit.
I just received this from Webike? I opened the box and found what's this?
The box was like that but with cushioning material and a flattened bottom.
I didn't expect it to be vacuum packaged.
But so much for the face White….
Well, it's okay, because they seem to be that particular about not lowering the quality.
The texture is not bad, so I wonder if the much touted 300D will perform as well as it should.
So you open the package and hope for the best. And then I put it on my Motorcycle.
I got cheated again….
I'm a dick….
The ZX-6R is listed in the "Compatibility" section of the manual, and even though the size is the same as my old Doppelganger, I can't help but notice that the ZX-6R is a ZX-6R.
It's no different than Size. But when I actually put it on, it's just a little bit too small.
I really wish they would test it on a real car before claiming it as a compatible model….
This one is even worse. Even a certain Yamaha's F Type guy could have entered Beauty if he had folded LeftMirror.
This is not good at all! Even if you fold up both Mirror, you can see all the way down to the Rear tireRim which is very tight….
The hole for the security chain, which looked large in the picture, is slightly small and does not fit through at all.
I really want my Gold back. Otherwise, I want to change it even if I have to pay the chase Gold to one higher Size….
That's not how it works anyway, right?
I had a bad feeling because this Motorcycle has a big head. But a certain Mr. Doppel's and Size are not so much.
I believed in them and bought them because they didn't change. And now I'm being treated like this.
The quality is not that bad, just not so bad as to make it easy to apply Cover.
It's just a little easier to put on. That doesn't make it bad.
But it doesn't fit the size of the latest Kawasaki cars at all. Because I have a big head.
You know what, you need to measure the actual car properly before you put the name of the car model in the compatible car models. Seriously.
You can't even return it after you've opened and used it, can you? I really want you to stop this!
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to use.
I bought it on the occasion of refurbishing the exterior of my PCX, which had been my commuter companion for many years.
Once the lower strap is adjusted to the Motorcycle Size by squeezing the lower strap, removal is easy by opening and closing the Zipper on the Rear.
After removing the cover, I hang it on the S-shaped Hook. The zipper handle, the Orange Loop at the Mirror, and many other features are well thought out and easy to use.
I have regretted buying a cheap one for about 2000 yen before, but I am Large satisfied with this product.
I would also like to purchase an additional Cover from MainMotorcycle.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Cover
[How is it used?
It is used for covered bicycle parking.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was very easy.
How was your experience with it?
The Fastener was attached and easy to cover.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
This is great!
I was concerned that it might be too short for the ZX-14R, so I searched the Net for a user, but I couldn't find a good concrete hit, so I ordered it on the spur of the moment.
Not to worry, the length is not a problem at all, no, I would say it is a perfect Fit.
In addition, as a countermeasure against mischief and theft, the first point is not to show the Motorcycle, but I was skeptical about the explanatory article that black is less conspicuous, etc. However, I actually used it and felt that it is less conspicuous than silver even in the daytime when seen from a distance.
Well, it's a little bit conspicuous with DOPPELGANGER's color, Orange Accent, but it's not a problem! LOL!
The diagonal zipper is really easy to use.
I hung up the Cover while forgetting to remove the Motorcycle key, but I was able to remove the key without removing the entire Cover by simply opening and closing the Zipper section.
The inside of the Cover is soft and seems to be resistant to scuffs and scratches on the Body.
To begin with, though, if you raise that diagonal zipper first and open it, you can lift the front and back of the Cover right up, so that you don't even have to rub it.
There is one difficulty, the Center belt for wind protection, but the Quantity:Pair (for Left and Right) and seems to have the same length with Quantity:Pair (for Left and Right) The Buckle is designed in such a way that the Buckle for connecting the Belt of the Motorcycle comes directly under the Motorcycle.
This makes it a bit difficult to bend down and reach for the Buckle!
As a stopgap measure, I adjusted the Left Side Belt to be the longest so that it could be connected as high as possible on the Right Side of the Motorcycle, which brought the Buckle to a visible position and improved it somewhat.
Well, that's not so much of a point deduction compared to the overall satisfaction.
I would like to state that these are my impressions on the sixth day of use.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Silver Cover!
The cover is smooth, silver, and stress-free, and the front and rear markings are clear and easy to hold.
It can be hung immediately and is not damaged by the soft inner fabric.
It looks very good. However, is the price of 7,000 yenOver balanced? Is the price reasonable in view of the current prices? I am not sure. However, the product is very good, so I have no complaints.
I also like the solid Fastener in Orange, which makes the Rear clearer, and it's a great accent. It's a good buy.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Quite good.
It has a front and back drawstring, so it is more fit than I expected, easy to put on and take off, and the material is solid and will last a long time. View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
I'm happy with the purchase
It is a firm fabric.
Now we just have to wait and see how long it takes to degrade.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
I purchased Repeat
This is the second Repeat.
They are replaced once a year.
I use it for SS and sports type motorbike because it is easy to use and has good waterproof property.
The hole for the chain lock is small and I would like to see it improved.
View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Hole positions and angles that do not match at all
The bolt holes are gapped and do not go in straight against the bracket, but instead go in at a licking angle, and the bracket holes are also slightly gapped and do not fit.
Level that needs to be welded, etc., at a small fabrication shop or once cut off.
Carrier had only this Hepco & Becker, and I was hoping it would be the only one, but is this a bad product?
Couldn't it be made to snap in with a key like OEMSeat?
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
One year after purchase
It was used outdoors in the sun for one year after purchase.
It was SIDEZip, easy to use, and I liked it, but it finally started tearing. It was rustling on a windy day, and when I looked at it the next day, there was a hole of several centimeters that ripped lengthwise…
Back colors fade rather quickly.
I am not sure if I should Repeat this product as it is not bad considering the price and ease of use.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
It was SizeExactly.
Size was Exactly
It rained right after I used it, but it kept the rain out well!
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
The perfect Motorcycle Cover
I used to use the FType SS for Yamaha. But when I changed to ZX-6R and used it, it did not cover up to the tire of the rear and it became rather twitchy.
The front cowl and mirror of the 6R are overhanging, and the rear fender is also very assertive. I bought a new motorcycle without telling my wife, but the Green color of the Rim part of the Rear wheel which is also very assertive was sticking out, and I was found out in no time. It's called hiding your head and doing something about your butt. Yes, I was scolded again. Even so, if I folded LeftMirror, I could manage, but it was troublesome to fold it every time I put it away, and it was also troublesome to notice and return it after I started running.
Although the preamble has become long, this system does not have such a problem, and everything fits perfectly without folding the Mirror. The long and easy to use Fastener also makes it easy to get back the ETCCard you forgot to remove without having to remove the Cover every time.
Ventilation is also a Quantity:Pair (for Left and Right) It's in the ear of the cover, and it's good to have a convenient feature that allows you to leave it open. (Doya)
I use a large, sturdy chain, but it's hard to thread and pull out every time. I wish it was a bit larger. It's a pain in the ass. It's also flame-retardant and waterproof, but the fabric is flimsy. I do not know how durable it is if I do not use it for a long time, so here is an unknown number. However, I think that Cost performance is very high because it is not expensive price setting.
Finally. I wish I had noticed this product earlier so I wouldn't have been scolded by my wife, that's what I regret the most.
View detail