Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
without a rattle
I was satisfied with Active's High Throttle Pipe & Phi;40 in the Throttle holder of 2014 NINJA1000 because it narrowed the opening, but there was a lot of rattle in the lateral direction. I bought this R6 Throttle Pipe because it looked like it would have less rattling.
But even after the replacement, the rattle was still the same after all (laughs).
So, I put the black resin washer between the Grip and Pulley into the Throttle holder as a trial, and the rattle became zero and it became smooth without any snagging when opening and closing the Axel.
Incidentally, NINJA1000's Quantity:Pair (for Left and Right) The grip is 115mm long, the same length as the grip on the mini bike, so I removed and replaced the 120mm size grip that was already on the bike.
Throttle pipe is white resin and it is a little bit conspicuous, but I am satisfied with the replacement.
View detail
Genuine Yamaha Bracket 13 for YZF-R1 2016
This bracket had clearly too some hit as it had snapped near to the engine side. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all toghether so I would get them all at the same time. In 5 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. SImple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. View detail
Genuine Yamaha Oil Cooler for YZF-R1 2018
This bike came in after a fall and a really back hit to the oil cooler. This needed replacing pronto. Finding the right part was not hard by simply checking Yamaha schematics and the part number came up. These are not cheap parts for this bike and after some other parts needed to fix this, the cost crept up quite a bit. Saying that though, this was still a heck of a lot cheaper than could be sourced locally. With the other parts needed for this rebuild, I had them all shipped together so save on the shipping cost. I use EMS and even though I did have some customs duty fees to pay, my order was still delivered in 7 days. The oil cooler came in a pretty big Yamaha box and was well protected. The oil cooler itself is a pretty intricate part especially with all the brackets that are placed around it. The fins and pipe joints were perfect and I could not be happier with this. Fitting was super easy as it was all ready to accept the new oil cooler. Thanks Webike. View detail
Sensor
I received a package today. The sensor is the one I would need. BUT!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! -------------------------------------------------- -------- I received a package today. The sensor is the one I would need. AIM!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! Powered by Google Translator View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-4R SE, SUZUKI GSX-S1000GT, KAWASAKI Z650RS, KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000R, YAMAHA YZF-R1M, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI KATANA
One point
I installed it at the One Point around the Handlebar which was refreshed after the Separate handle was installed. I am very satisfied with it because it is a place that can be easily seen by driving medium eyes. View detail
Fits: KAWASAKI ZZR1400, YAMAHA YZF-R1, KAWASAKI ZX-14R, KAWASAKI ZX-6R, YAMAHA YZF-R1M, Others
Quality is high.
The quality is high, but so is the price. I bought it at Webig for the Point Reduction Sale and used it for the master cylinder of the rear brake of my DAX125. I think the cost is reasonable because of the cut-outs. View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Genuine Yamaha Throttle Cable Clamp for YZF-R1 2020
This was bothering me as it was missing for some reason when this bike came in for a service. Yes, it is a simple throttle cable clamp that holds in place going under the front tank but I wanted to add one back. Finding the part was a little tricky but managed to track it down using Yamaha schematics. With a couple of other small brackets and bolts for this bike, I had them all shipped using EMS and my order arrived in 5 days. The packaging for the whole order was excellent and no damage to anything. The clamp came in the Yamaha packet and was inside a bubble wrap envelope. The clamp is well made and fits the shape precisely. The small bolt hole is perfect and aligns as it should. It is finished in the standard satin black Yamaha paint. Job sorted and now my ocd is at rest. Very pleased for a small price. Thanks Webike. View detail
Fits: YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA XSR900, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA MT-09SP, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8S, YAMAHA FAZER8, YAMAHA TDM900
Optimized with Front1Down
[How is it used?
This is an IMPRESSION with 100% Circuit running.
Was the one you received as per Image?
Yes.
This time, we dared to choose 525 without 520Conversion, but even though Steel is the same as OEM, it is MADE IN SUNSTAR. (OEM may be SUNSTAR as well.) is lightweight due to the lack of meat removal and the RubberDamper, which is present on the OEM.
Was the installation difficult?
The shop is in charge of the front replacement, so the process is basically to loosen the axle of the rear wheel, lower the tension of the chain, and then remove and install the front sprocket. The front sprocket nut has a high torque of 140Nm and the OEM is very tight, so it may be difficult to remove the front sprocket without a proper tool.
How was your experience with it?
The OEM YZF-R1/M has a secondary reduction ratio of F16/R41, but even in Circuit, it rarely goes into 6th gear, and most people change it Large. Most people change the ratio to a large one. Unless you want to adapt it to a specific Circuit, it can run in any Circuit to some extent.:As for the Set, I think Front1Down is the best solution, running with the OEM GEAR ratio, In second gear, it's hard to ride at high rpm, and in third gear it's a little heavy." You can drive comfortably in 3rd gear on the Point where you feel like you are in the middle of the road. The appearance does not change at all, but expensive Parts (Exhaust System, Suspension, etc.) I think it is more expensive and outstanding than replacing the
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
A new pure STD Nut is required for replacement. I also replaced the Washer, which is in the form of a plate, at the same time.
・90208-22002 Washer、ConicalSpring ¥616 (Tax included/as of April 2024)
・90179-22018 Nut ¥660 (Tax included/as of April 2024)
The two points are
View detail
It is easy to use
Brake Easy to grip and use as well as lever
It looks cool and perfect!
There was no XJR400R setup, so I replaced it with an FZ1N Bracket.
I changed the adjuster from M10 to M8 with Recoil.
A dress-up adjuster is attached.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Generally satisfied, although there are reasons for the low price.
The DAYTONA WaterRegistrant I was using on my 2019 Z1000 is now over 4 years old and falling apart from the quicksand, so I decided to try a different Manufacture next.
The evaluation is based on the comparison with DAYTONA's Cover, but the large size of the Cover can fit in the LLSize Z1000.
The material is a bit flimsy, and it is hard to say how durable it will be until it is used for many years, but I have the impression that the price is appropriate in this area.
The front and rear cover has the same locking holes, but the front wheel hole is much closer to the front, so you have to lock it at the very front.
I think it is good that there is an air hole to release moisture in the Mirror section, which was not available in DAYTONA. When it rains, the humidity inside the Cover unexpectedly rises, and since it cannot escape, the inside gets wet too.
In general, the quality of the product was generally satisfactory for this price with good cost performance, although there were some price-appropriate parts.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, SUZUKI GSX-S1000, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-4R SE, SUZUKI GSX-S1000GT, KAWASAKI Z650RS, KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000R, YAMAHA YZF-R1M, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F
Steering stem nut
Item have arrived..fast delivery.as usual packing perfect.highly recommend.thank you webike.my 7th purchase..keep it up webike.kudos View detail
The footpeg is not as slippery as it should be.
Above all, the footpeg section is less slippery compared to OEM.
If you run your finger over the OEM, it slides, whereas this one wants to bite into the prongs.
The fabric is sharp enough to catch on the footpeg when the shin part of the leg is touched by the footpeg while waiting at a traffic light.
This made the footpeg more secure when loaded and easier to ride.
The texture was good, and I was overwhelmed when I opened the package.
The footpeg position is far more flexible than other companies, and can be used as a simple dress-up since it can be set to a position equivalent to that of the OEM.
I am using it with the Largeest limit lowered and raised.
View detail
Genuine Yamaha Cord Comp for YZF-R1 2016
This was a part that I honestly never thought I would have to change ever. It is the cord from the negative lead back. I have no idea how it happened but the old one had some serious issues before I got the bike and was not running smoothly. Iafter a lot of pain staking investigation, it was found to be a right old mess. At some point the cord had been cut but how I have no idea and who ever though it would be good idea to solder the wires together and wrap in insulation tape. This was never going to wrok as this cord need a certain range of resistance to which is was lacking. Finding the right cord was easy as I checked Yamaha schematics and it fits a few other bikes anyway. The price was great and about half the price as in the UK. With the new nut for the front end and a couple of other parts, I got everything shipped at the same time and used EMS. I ordered on Monday and this arrived to me on Friday, how good is that! The cord came in a Yamaha packet and was well packed in the box. The cord also came with the rubber boot to stop any dirt and grime build up on the connector. It was a bit of a ball ache grtting the old one completely free from it's postion but once done, the new cord went via the same route. Now the bike does run better and I can rest assured, this fix was done right first time with zero solder in sight. Thanks Webike. View detail
I had a hard time removing the OEM.
The product is good, I wanted the Rear brake to work a little better and it worked.
However, there were many places on the YAMAHA chassis where the Torque was higher than the Service Manual, and it was very strange to loosen the Torque here too. I tried to take the wheel to YSP, but I was able to loosen it by warming it up with a burner and buying a proper tool. The screw ruined 1 pc. I wish I had at least used a hex. It was not an easy part to replace at home.
View detail
Satisfied
As others have mentioned, it works Linearly.
It works as long as you step on it, and it is easy to lightly step on Control.
It is a little expensive at mass retailers, but I am glad that I can buy it at a very reasonable price on the webike.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
It is very good as a substitute for genuine product.
I bought them because I wanted slightly better brake pads as a replacement for the original ones. As a result, it did not have better braking ability than the original. However, if you use it as a replacement for the original product at a low price, it will be an appropriate alternative and not inferior to the original product.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail