Reviews
It is easy to install.！
I ordered it right after the delivery of my car because it is inconvenient to go anywhere without the easy-to-use helmet holder. 。 Installation was easier than I expected and I didn't have to worry about it. View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/117931/80-564-14610_1_TS.jpg)
of good quality
However, in my case, the position of the DRing did not reach the Holder because I used SHOEI's GT-air, so I had to purchase a separate wire to accommodate the DRing. The Holder side does not have any problem. The product is well made and looks good as the OEM Level. View detail
I installed it myself.
There is no Instruction Manual and installation was quite tedious. There was a video showing the removal of a plastic board? I saw a video of a person taking off a plastic board and installing it, but was it too much for an amateur or was I not good at it? It was a bit too much for an amateur. In the end, I managed to install it by shifting it, but it got some scratches on the steel bar. View detail
Easy to use
I lock it through here because I have experienced that the chinstrap of the helmet was cut and the helmet was stolen.
I guess it's a little harder to steal.
View detail
Be careful if you are using SHOEI's Helmet!
The product itself is great, but I couldn't use it on my SHOEI GT-AIR2….
Sad….
Well, it can be used for other helmets, so it's OK. (Lol)
View detail
It's so good
That's one word for it.
I have a Ninja 1000SX and I can attach it to the helmet holder.
Purchased because it is hard to put on.
The product itself is great, although how to utilize Carabiner is a challenge!
If you're using GT-AIR2, choose this one.
View detail
![[K TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/85546/80-564-18500_01_TS.jpg)
Fits: HONDA CB125R, HONDA CB250R, HONDA CB650R, HONDA CB300R, HONDA CB150R
I'm glad I bought it
There is no interference between the helmet holder and the body, and I am satisfied with the large size of the product. I am happy to have purchased this product at a low gold price. View detail
Made by KIJIMA!
I purchased a Helmet lock made by KIJIMA for peace of mind.
I highly recommend this product because it is Simple and SMART to install.
In the case of RC390, it is simply inserted between the Left Side Tandem Footpeg and the Frame.
Since the bracket and the locking part are separate parts, and the locking part is fixed only by a protrusion and Plus screw, it is recommended to apply screw lock agent to the screw part.
The feel was very good, and although I was concerned that it might hit my feet while driving, I had no problems.
View detail
This is a standard external helmet holder for BMW.
I bought this for my BMW G310GS, the same manufacturer as the one I installed on my R1250GS, so I had no hesitation in purchasing it. There is no specification on how much torque to apply, so I tightened it to the point where the body would not rotate. It is very convenient to have it when you have luggage in the Pannier. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
This location is easy to use.
I think it is easy to use as a place to hang the helmet you took off.
Installation is easy
View detail
You should put it on if you can.
GSX250R has a Helmet holder if the Rear Sets are removed.
The OEM holder is a tricky one, as it is difficult to hang by the helmet, and the seat lock can easily become half-locked, causing a trouble if the seat is dropped.
We do not want to open and close the area under the Rear Sets because of the ETC, documents, etc. and the SeatBack Fixing Belt.
Endurance's or KITACO's Holder would be the standard for ease of use.
The increase of keys in the Key Holder as Demerit.
Differences in Plate shape and lock position preferences.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Grab Rail does not install well if present.
I purchased this for Bon Shrimp Le T100.
The screws for fixing the Grab Rail are not properly inserted because the angle 1 is not adjusted properly when I tried to install it according to the Instruction Manual, and the Large size is not correct when I tried to install it on the Grab Rail side.
In order to attach it to the Grab Rail, a layer of protective Tape would need to be attached, and I am looking into the availability of Tape.
Please let me know if there is a better way to install something.
View detail
Can be used with NOLAN Ratchet Type locks
The NOLANHelmet's Ratchet Type chinstrap does not have a D Ring, so the Mel Helmet Lock cannot be used.
However, the problem can be solved by passing this product through the Ratchet section.
KIJIMA's explanation includes reference to SHOEI's Ratchet Type, but that it can also be used for NOLAN.
However, the attached Carabiner is not necessary, as the Image is connected like a Key Holder, but it is a Gold Plate, so the surrounding area becomes a boundary, and even if it is stored somewhere, it does not fit well.
View detail
KIJIMA, as expected.
I installed it on a ’21 FJR1300. The product description says it is for 09-14 model year, but it can be installed on the current (=last) MODEL without any problem.
The installation feeling, especially the protrusion in the width direction, is a bit annoying, but since it is a Universal ProductBase, it can't be helped. Overall, except for the FJROwner, the product is installed at a level that one would not notice it was retrofitted, and the quality is on par with OEM products.
There are no basic problems with the feel of the product. However, as mentioned in the instruction manual, the position of the helmet is so low that the helmet may come in contact with the exhaust pipe. So, it is necessary to make a device to use it as a catch for the helmet.
In any case, KIJIMA is as expected. Frankly speaking, although it is not so plain, it does a good job that does not betray our expectations.
even if One-keyed." Regarding, I could not do it in FJR.
However, the position of the groove in the longitudinal direction of the key (key cross-section shape) was different, and the OEM key could not be inserted into the keyhole of this Helmet lock.
We also planned to use the key cylinder for the Pannier case that came with the new FJR, but the shape was too different to use.
The key cross-sectional shape is the same on the other two 2014 and later Yamaha cars I own, so the key cross-sectional shape is the same on the recent Yamaha cars I own. One-keyed." seems to be impossible. I will share the information in the hope that it will be helpful to those who are contemplating
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
Just as I imagined.
I used it on a different Motorcycle and was happy with it, so I decided to use it on this one as well.
Installation was easy, taking less than five minutes.
The small size makes it difficult to lock and remove, but I think this is just right because I don't want to use a large size.
View detail
This product is great! Good cosmetic product
The D Ring was not able to reach the helmet lock of Standard Equipment because of the full face helmet of SHOEI's Ratchet Type, and it had become useless. However, by using this product, I can use Standard Equipment's Helmet lock for the first time.
Thank you KIJIMA for making such a good product.
This is Type 2 for SHOEIHelmetRatchet Type. There are two types of products, so please be sure not to make a mistake.
View detail
Just having this is a relief.
This would be helpful.
It seems that each company is thinking about various things even in NORMAL mode.
Seat off and pinch it...too much hassle!
This would be a real help.
The installation is different depending on the car model.
Would it be better if you could prevent rain from getting inside the Helmet while it is in use as much as possible?
It's not a problem for me this time, though.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CBR500R, HONDA CBR400R (2013-)
For TRANSALPXL750.
I put it on TRANSALP.
I am satisfied with the quality.
Be careful not to lick the bolt when you remove it!
I licked it w
View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
The structure can be unlocked in seconds without a key if you know how to install it as it is.
The details will not be disclosed for security reasons, as those who have purchased the product will be able to tell if they see it, but if the product is installed as is, it can be unlocked with a simple tool.
It can be improved with a simple modification, but why did they make it this way? It is too easy to remove even as a remedy for lost keys when you go out.
I guess it is supposed to be used as a simple lock for a short time, but I wonder about it.
The bolt that secures the lock to the bracket should have been made of something more difficult to remove, such as Torque, and if this product is used, it would be better to take countermeasures and use a strong screwdriver to attach it.
View detail
It is not Standard Equipment.
Easy installation by tightening Screw1pc. with Phillips Screwdriver
I use it depending on the situation, not on this product, but on the fact that if the chinstrap is cut in the first place, it is the end of the story.
I don't want to hang it on the Mirror or Handlebar or drop it on the Seat, so I'm satisfied that it serves its purpose.
View detail