Reviews
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail
Advantages of Maintenance
I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
NGK IRIDIUM is the best spark plug for the Honda Grom
These NGK IRIDIUM are simply the best spark plug for the Honda Grom! The NGK CPR7EAIX-9S IRIDIUM spark plug is a cooler plug than the OEM version that comes on the Honda MSX/GROM, it's better if you spend a lot of time with wide open throttle (like lots of freeway riding), besides that, it has superior longevity, better ignition and improved fuel economy. Overal, it's simply the best plug for the GROM and Webike sells them at a very good price also! View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
I think I'm feeling Torque up.
After the last replacement at 10,000Km, it was replaced for the second time at 20,000Km.
There were no glitches, and I feel like Torque has gone up in my mind.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
I got a lot of iron powder.
I used it to clean up my new MONKEY125. It was my first and second DIY oil change, but it was done without any problem. View detail
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
Reliable K-PIT
Repair Parts at KPIT for your peace of mind.
Purchased to replace Rotor.
View detail
It went well.
I knew it was Honda and For SUZUKI, but I bought it thinking it would come on if I changed Washer, etc.
The chrome black color looks great and the weight is expected to reduce vibration.
View detail
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail