Reviews
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Better movement.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance. Whenever I buy a used car, I replace the stem bearings, not only to improve handling, but also to return the car to standard condition.
Was the one you received as per Image?
The usual HondaOEM Parts arrived. There is no doubt about it.
How was your experience with it?
The movement is still better.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Stem bearings should be replaced because everything moves better. Although it is a troublesome process, it is more effective.
View detail
For CB250F
Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
For CB250F
Genuine product Spark (CR9E 98059-59916) Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER GASKETS
Genuine product -GASKET,EX. PIPE 18291-MN5-650 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Easy to grip due to its folded shape
I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail
2BL-SC54 is not compatible.
I purchased this product with CB1300SB2019MODEL.
The tank side is narrow and the cap side is wide, and the screw holes do not fit at all.
So I will return it.
I think the quality is good
I would like you to check it carefully before you describe it.
View detail
Genuine Honda Oil Filter for CBR600F
Ok so it's just an oil filter. An oil filter that gets changed through out the bikes life. So, why bother buying really cheap aftermarket ones or the really expensive one when you know the genuine will work perfectly and give a great life span. The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Honda part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS as it gets to me very quickly and the tracking is full, I mean FULL as in every step of the journey. I know exactly when the order will be delivered and apart from once, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape.There is not really much to say about the finish of this oil filter as there is not really much you can see, The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Lever means Large
The effect is overwhelmingly stronger compared to NORMAL. We recommend lever replacement before MASTER or BRAKE HOSE. View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
FOR CB250F
It's realy genuine and reasonable price.Spark (CR9E 98059-59916). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
FOR CB250F
Actually I could not find this item in my country (24724422000 cover, dust 24724-422-000). Finally I bought it from webike. It is authentic. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail