Cute.

Pad thickness is just right and cute.
It would be better if it were cheaper. View detail

For CB250F

good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail

For CB250F

Same as the genuine Front Fork Oil Seal Set . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail

Formative Lantern CUB

Changed from high quality plug to Standard Plug BP5HA I can't see much change in the expensive product and it seems to be covered with black. View detail

DAYTONA Oil Clean Bolt

Item received.took 4 days to arrived.excellent.very well packed.item is solid.very light than the original bolt.magnet is strong.thank you team WEBIKE..never disappoint.highly recommended to shop. View detail

I wanted Hook in just such a place!

[How is it used?
I was thinking that it would be better if there was a loading hook around the lower part of the Rear Carrier of REBEL1100 to stabilize the loading.

Was the one you received as per Image?
A loading hook with a width of 20 cm can be attached around the top of the RearStop-lamp.

Was the installation difficult?
Bolt On and it is ready to install. It takes only 5 minutes if you are familiar with it.

How was your experience with it?
I just loaded a backpack on a Tandem seat with a rope. The loading hook attached to the suspension was too large in width, and although it was sufficiently secured in the horizontal direction, it was not secured enough in the front-back direction. Even if a backpacket narrower than the width of the motorcycle is loaded, it is firmly fixed in the front-back direction, and the shaking of the luggage is reduced.

[Included Parts:were they on?
The Instruction Manual is now available on the Net, so the accompanying explanations are also simplified.

[Was there anything that disappointed you?
Digitize! I would like to see the Construction Instruction Manual attached to the product without being digitized! I would like to see the Construction Instruction Manual attached to the product without digitizing it...It would be nice to be able to refer to it on the Internet anytime, but what if the company's policies change or the company goes bankrupt and the WebSite disappears? Also, the QR code is only a LINK to the WebSite, so I have to search for it by tapping the part number, and it takes a lot of time to start the construction. Can't something be done about it... View detail

I'm satisfied

I had been interested in MOTO DX for some time, but had not been able to try it on my ZRX1100 because it was not available. I have just purchased a new Z125PRO, and although there was nothing wrong with the original Plug, I decided to give MOTO DX a try right away.
The replacement work is not particularly difficult, since all you have to do is to replace the plug. In fact, the Z125PRO can be accessed immediately, and since there is only one plug, it was one of the easier ones. However, it is not difficult, but if you twist off the plug by over-tightening, you will be in trouble, so be careful if you do it by yourself. I did it before with a ZRX1100, and it was a chilling experience. Fortunately, I was able to remove part of the twisted off plug using the Extractor, but I almost had to reverse the upper part of the engine. When tightening the plug, it is necessary to check the tightening torque carefully and close it with a torque wrench, or if you tighten it by hand, you need to tighten it more or less.
I quickly replaced the plug, put the plug cap back on, and did a test run. First of all, I felt that the car started up clearly better, and when I started driving, I felt that the acceleration was a little stronger. I do not yet know the effect on fuel consumption or durability, but I hope that the durability will be as good as the manufacturer claims. In general, I believe that the replacement has had a positive effect.
MOTO DX is more expensive than most plugs, but I found it to be a reasonably effective product. However, for a single-cylinder vehicle like the Z125PRO that only needs one, the price was right for a trial run because the hurdle is lower.
It is a good product that I would recommend without omission to my friends who drive vehicles with the settings. View detail

DAYTONA Oil Clean Bolt

Item arrived..as can see,superbe packing since day 1 of my order with webike.product is as advertised.very light and strong magnet.quality good..thank you team webike.. View detail

Titaniumium color!

Small but finely crafted
Luxury that you can feel in your hands
Worth the Gold! View detail

PetitCustom

PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color! View detail

Standard PetitCustom

For Caliper's color insert!
Trial installation before putting brembo in.

4mini standard color:?? View detail

original quality

You have to have a little mechanical ability, but its worth the effort to put it in yourself. A little pricy for older bikes, but not as pricy as the newer models.I installed this clutch in a cmx 250 that I used as , and it made my riding experience much better.definitely good quality.took me about 1 hours the first time . Do you need a clutch set?. Did the clutch set make my bike more fun in the road?Yes. View detail

Reliable DAYTONARed Pad

I have been using Red Pad for generations for my city riding and Touring Main Machine, so I didn't feel any particular anxiety.
It seems that the previous owner had DaytonaGolden in his car, and even with the same grip, the Golden felt like it stopped with a final jerk, but the Red Pad feels like it stops naturally with the same deceleration ratio until the end when it stops smoothly, so I prefer the Red Pad for control.
This is a balance of Tire performance, disc, front fork and rider's weight, so please take this as a personal opinion. View detail

Easier.

The GSX1300R HAYABUSA Throttle was as heavy as rumored. I thought it would be a little heavy and large enough to be durable, but my hands are getting tight, especially when riding around town while also holding the brake. The price is cheap and I think it is a good product. I also bought Throttle's Spring to replace it by myself, but I'm using this one in due time. View detail

Balance between cosmetics and seminal vesicles

The cost performance is good for the braking power, as there is little reduction in braking power. View detail

C6HSA

My friend asked me to pick up a spark plug for his HONDA SOLO. NGK candles satisfy me with their quality and stable performance. The choice fell on a candle with a classic potassium number (6). At the moment, the candle is working properly in my friend's motorcycle... View detail

RCH-01

The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail

There was no one with Level gauge.

The OEM Product was not strong enough, so it was replaced. After installation, I found that the flange surface is narrower than the OEM Product, so there is a gap between the OEM Product and the engine side. I would have liked to have had a product that fits Exactly. View detail

As expected of DAYTONA

Was the installation difficult?
pimping
How was your experience with it?
It's going to look different View detail

It was EXACTLY!

I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10! View detail