Reviews
For CB250F
I am happy to deal with the webike team.Actually this item i could not found in my country (Batsugu, Service Butsuku 77251-342-000). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. View detail
Good heating grips!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
FOR CB250F
Actually this item i could not found in my country (Emblem,Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail
FOR CB250F
Actually I could not find this item in my country (24724422000 cover, dust 24724-422-000). Finally I bought it from webike. It is authentic. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
Genuine Honda Rear Piston Seal Set for CB1000R 2011
These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail
Good Brake Pads
Very good Control. Durable and reliable. View detail
Review
This is a oem honda o ring for the thermostat housing, good quality part. Absolutely vital when you are changing your thermostat. View detail
FOR CB250F
I have ordered 1 clamps and installed to my bike. now it's loking new. item included in webike box.packaging is very safe. thanks webike team.highly reomended. im happy to deal with webike. View detail
FOR CB250F
actually this item i could not found in my country (Drain 17358-KR8-750). Finally I bought it from webike. It is GENUINE. Very good packaging. Thanks to the webike team. It has not been installed yet.good for the genuine buyers. View detail
FOR CB250F
I searched for this in my country 91252MC4003 but I can't find it. Finally I bought it from webike. It is genuine. Very good packaging. Thanks to the webike team. View detail
For CB250F
I have ordered 2 clamps and installed to my bike. not it's loking new. item included in webike box.packaging is very safe. thanks webike team.hoghly reomended. View detail
Fast delivery and good product
I received the product in good condition. Above all, thank you for sending me a product of low price and good quality.
It hasn't been installed yet, but the quality looks good and I think I'll be able to spend this winter without worrying about my hands.
It's nice to be able to buy it much cheaper than buying it domestically.
Please continue to supply good products at low prices in the future ------------------------------------------ ---------------- I received the product well. It's still mounted, but it looks good quality and I think I can spend my hands in this winter. It is good to buy more cheaper than purchasing in Korea. Please continue to supply good products inexpensive in the future Powered by Google Translator
View detail
New Fuse
The fuse for the installed product ran out, so it was replaced with a new one.
It was a Single Item, HondaOEM Product fuse and not too expensive.
Since it is a Fuse, it could be any Manufacturer's, but the selling price of Single Item, as a HondaOEM Product, is cheaper.
View detail
Replace with new one
I purchased this product to replace the old one with the new one because it is a Fuse and I think it is OK even if it is old in terms of performance, but it is a Honda OEM Product, Single Item and the price is not too expensive. View detail
No problems so far.
[How is it used?
NSR250R (MC21) The original Regulator of the "M" was replaced because it was defective.
I had assumed that OEM parts would be quite expensive, but after purchasing the product, I learned that there was not that much difference in Large.
Was the one you received as per Image?
What has been attached so far (OEM?) There are slight differences between the two, but they are generally the same shape.
Was the installation difficult?
With MC21, I couldn't access directly, so I had to remove the Tail cowl before I could work on it.
If Cowl is removed, access is possible from both SIDE, so it is not that Large strange.
How was your experience with it?
The voltage became unstable while driving, and the power consumption became higher when the headlight was turned on.
I have a voltmeter on the car body, Idling, and the voltage is now stable while driving.
So far the symptoms related to Regulator have been cured, but I am a bit worried because many of the past Impressions I have seen have been ruined after a while.
At least it is working properly for now.
[Included Parts:were they on?
Boltetc. must be prepared separately or use the one that came with the product.
[Was there anything that disappointed you?
I'm happy with it so far.
【Review】
I have just started using it and have had no problems with it.
To be honest, there is not that much price difference between OEM Parts and OEM Parts at the moment, so OEM may be a safer choice.
View detail
Fits: HONDA C70, HONDA C70, HONDA CT110, HONDA CT110, HONDA CT110, HONDA CT110, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD
Original Part
When I bought my C50 the cap was split, I found the OEM part number and ordered this. It's exactly the same as the original. View detail
Fits: HONDA CB-1, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA NSR250R, HONDA NSR250R, HONDA RVF400, HONDA VFR400R, HONDA VTR250, HONDA VTR250, HONDA VT250 Spada, HONDA jade, HONDA CBR600F, HONDA foresight, HONDA CBR600F, HONDA CB600, HONDA CB400FOUR (water-cooled), HONDA CBR600F, HONDA VFR750F, HONDA CBR250RR (MC22)
I was thinking OEM.
It was a little cheaper than HondaOEM and I thought it would be the same, so I used it, but it seemed to heat up quite a bit and I was worried, so I replaced it.
After all, it is safer to use HondaOEM Product even if it is a little expensive.
View detail
Fits: HONDA VT750C2B, HONDA VT750C2B, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750, HONDA VT750
Genuine Honda Switch Assembly for CB900F 2007
This was a part that appeared to be the cause of the non starting problem we had been facing with the CB900F 2007 bike. After extensive investigation, and changing a few other parts, this was the only part left to change. The part numbers were not hard to find by using the tools Webike provide and then cross referencing Honda schematics. Added to my order with a few other parts as well as the right hand side grip. All shipped with EMS and delivered in 5 days. The package was well padded and no damage. The switch arrived in the genuine Honda packet and was wrapped in bubble wrap for safety. The switch is nicely made, the only way to test is to install and before we put everything back together we tried it and it fixed the issue. Now the bike starts first time everytime. Very happy customer, great job Webike, thank you. View detail