Standard PetitCustom

For Caliper's color insert!
Trial installation before putting brembo in.

4mini standard color:?? View detail

The product was exactly what I expected.

This is the third time I've bought U-KANAYA's Lever,
I decided to use a short type for the first time because the car to which it is attached is a Grom (JC92) and it is small in size.
The look was quite Refreshing and the feel of the operation was perfectly fine with three fingers.
The quality was satisfactory, as I had already experienced with the previous two times, so I was satisfied with the quality I expected, although there were no surprises. View detail

KITACOGasket

I used it to replace the exhaust system on my ADV150 and it worked fine with no exhaust leaks.

There are no particular difficulties in installation. View detail

Well

I thought the fit was good.
The installation was a bit of a hassle as the color tends to fall off when done by one person, but it was difficult enough to install in about 10 minutes.

I think that the product itself is not Beauty because of the lack of waste treatment when painting and welding.
The function itself seems to be fine, but it seems to be loose. View detail

To replace Exhaust System

2Quantity:The set is reasonably priced, and KITACO offers peace of mind. View detail

No particular deficiencies

It is for advanced users, as a certain amount of knowledge and a certain amount of tools are essential.

The quality is not bad.
There is no BALI that can cut your hand.

Holes, which are holes, should be cleaned thoroughly because of shavings.

BALI should be shaved and finished as usual with a little File, about 1000.

The head has a big valve already assembled,
It was easy to install the included High Camshaft and OEM Locker Arm.

Reinforced Crank, Piston, Cylinder, Headetc.
It's a bit rough, but this is all that's included, along with an instruction manual,
I think it is a much better value for money because of its good quality ^^^;. View detail

Affordable and easy to use

[How is it used?
Wiring was needed for Circuit Running.

Was the installation difficult?
Copper Washer is included, so there is no need to buy it separately for the first time.
Of course, without the WiringPlate, wiring is not possible, so please purchase and install it separately.
6R is Oil Pan Bolt with Plate bite.
I was reluctant to remove the oil pan bolt, but so far there has been no oil seepage, so I can use it without any problem.

How was your experience with it?
Designability is not particular, but I have no problem with the functionality.
Affordable and easy to use.

[Included Parts:were they on?
Copper Washer and Wire included.
It is a one-time fee and must be purchased the next time it is used.

Point and hang of installation
Wiring should be done by applying tension in the direction that the bolt is tightened. Sometimes we see wiring that is not only meaningless but also dangerous. View detail

Cheaper than OEM

This will be no problem, unless you need OEM! You can spend the difference on Oil. View detail

Best kit if you are looking to improve the clutch appearance and durability

About quality and texture - The reinforced 6 clutch disc kit from Kitaco is made from aluminium, steel and fibres with a lovely machined surface finish on the outer rim, the quality from the overall fit and finish is perfect. About the feeling of use - The reinforced 6 clutch disc kit would have to be the best kit if you are looking to improve the clutch appearance and durability over the original setup. Would have also been nice if all six posts had been drilled and tapped to accept the corresponding aftermarket clutch lifter plates. Products to buy together - A key product to purchase when upgrading the clutch system is a set of heavier clutch springs. There are varying degrees of aftermarket clutch springs available, just depends what suits you. Difficulty of installation - The installation of the reinforced 6 clutch disc kiti is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of special tooling and basic hand tools is what is required to access the engine internals and assemble the clutch kit to secure onto the main shaft of the tramsmission. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the reinforced 6 clutch disc kit is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the reinforced 6 clutch disc kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

enchanting (Lol)

It was the first time I tried to replace the Exhaust System by myself, but I managed to complete it.
The Style has tightened up a lot!
I just couldn't get ECUReset to work. ( Nope.) Siksik…⇒ I'll have it looked at at my next inspection.
The sound in general was LARGER than I had imagined.
We live in a residential area, so we have to be careful about the sound of iDrink (especially in winter).
Sound is satisfied. View detail

1pc. is Smaller

The first one was a little smaller than the second one, so the Quantity:Set and it's falling down.
The other one was a good Just fit. View detail

Great

The packaging is meticulous.
Installation is easy, requiring only a hang to peel off the old Gasket.
After the installation, a test run showed that the Torque is increased in the entire area.
It makes you want to turn it. I will turn it.
However, it is a little noisy when the Axel is opened to a large size.
When opened modestly, it accelerates reasonably well and is quiet.
Although these are expensive parts, they are carefully crafted, and you will feel a sense of ownership. View detail

Less expensive than OEM

It is less expensive than OEM. Performance is probably comparable to OEM. View detail

Porting for dio to GROM

I was planning to replace the DAYTONA Screen I had installed on my DIO110 with a new one for my GROM, and I came across a site that had repair parts for the GROM bracket. I placed an order and was able to install it! 。 However, this product DAYTONA91450 and Bolt nut setDAYTONA91451 are required. Also, there is no instruction manual, so please refer to YouTube etc. View detail

Vibration countermeasure and dress-up

I chose Champagne gold to match the color of GROM's front fork. This Bar End is also installed on my previous NINJA400 and my current SUPER BOLDOR. 330g on the One Side is effective against vibration (I think lol) and even if it gets scratched, only the Cover can be removed, so it is cosmetically good. View detail

The quintessential YOSHIMURA!

Texture is very good! Logo is also very good View detail

Replacement of DAYTONA Screen

I was planning to replace the DAYTONA Screen I had installed on my DIO110 with a new one for my GROM, and I came across a site that had repair parts for the GROM bracket. I placed an order and was able to install it! 。 However, this product and DAYTONA91450 Bracket Set are required. Also, there is no instruction manual, so please refer to YouTube etc. View detail

STD Size

Motorcycle I bought used, originally came with 15T but I changed it back to STD Size 14T.
The Rear sprocket and Chain were replaced at the same time as the FrontSprocket, making it much easier to drive. View detail

530-1010216

Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail

SP TAKEGAWA Meter Protection Film

About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail