Reviews
License Plate Base
Installed on a '24 GSX1300R HAYABUSA 。 It was Exactly without interfering with YOSHIMURA's Fender lessKit. View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA SHADOW400, HONDA SHADOW1100/1100Classic, HONDA VTR250, HONDA VT750S, HONDA VFR400R NC30, HONDA VT400S, HONDA RVF400 NC35 , HONDA NSR250, HONDA NC750X RC72, HONDA NC750S RC70, HONDA NC700X RC63, HONDA CBX400F
GOOD looking
Installation itself is very easy.
With Adjust so it can be adjusted to your grip.
I think it is a very flourishing Parts with good detailing.
View detail
Ornamental Iron Pipe
The construction of the product is quite good, but no matter how it is installed, it interferes with the Swing Arm.
If it can't be installed, it's just a crooked Pipe.
View detail
I made a mistake in my Size selection.
Motorcycles like mine with a Rear Carrier installed should be 1 or 2 sizes larger than the appropriate size.
If this Cover gets damaged, I'll go for 2SizeLarge next time!
View detail
Cospa best
Inexpensive and perfect quality
Safe to use
View detail
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
Size is Exactly
The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly.
View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA Gold Wing, HONDA VALKYRIE, HONDA CB1300P, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VT250F, HONDA XELVIS, HONDA VTZ250, HONDA Steed400, HONDA RVF400R, HONDA VF400F, HONDA VF400F INTEGRA, HONDA VFR400R, HONDA VFR400Z, HONDA Shadow VLX, HONDA Interceptor, HONDA MAGNA
It is a good product for Choi Custom.
OEM is Material:Plastic and cheap-looking, so I replaced it. Simply Material:The aluminum finish is not aluminum, but a satin-like high quality finish like titanium, so it feels massive for its weight and is very satisfying to look at.
It is Material that is the cautionary tale.:Since the cap is not plastic, it is safe not to touch the cap when the Engine is hot after a stop due to high thermal conductivity. Turn the cap after the engine has cooled down to a certain degree. You may get a slight burn.
OEM is Material:I understand that it is Plastic.
View detail
It was replaced under warranty.
The other day, I was told that Quantity:Pair (for Left and Right) The footpegRubber on my LARGE footpeg came off and was under warranty. I received a new footpeg and replaced it. Thank you very much. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Manufacturer Warranty
Less than a year after purchase, Rubber is Quantitative:Pair (for Left and Right) Both peeled off.
This is what happens, isn't it?
Contacted Webbig Customer because it was a Manufacturer warranty or 1 year.
We are pleased to announce that we have received the Manufacturer Guarantee.
I have purchased many different Parts, but this is the first time I have had a Manufacturer's Warranty.
If you purchase Parts with a Manufacturer's Warranty, you should keep the Manufacturer's Warranty and the delivery note.
View detail
Affordable and easy to use
[How is it used?
Wiring was needed for Circuit Running.
Was the installation difficult?
Copper Washer is included, so there is no need to buy it separately for the first time.
Of course, without the WiringPlate, wiring is not possible, so please purchase and install it separately.
6R is Oil Pan Bolt with Plate bite.
I was reluctant to remove the oil pan bolt, but so far there has been no oil seepage, so I can use it without any problem.
How was your experience with it?
Designability is not particular, but I have no problem with the functionality.
Affordable and easy to use.
[Included Parts:were they on?
Copper Washer and Wire included.
It is a one-time fee and must be purchased the next time it is used.
Point and hang of installation
Wiring should be done by applying tension in the direction that the bolt is tightened. Sometimes we see wiring that is not only meaningless but also dangerous.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
I replaced the OEM 10 degrees with this 6 degrees.
When the handlebar is turned all the way to the left, the clutch wire is too tight and delicate. I think it does not interfere with driving, but I am not worried about continuing to use it in this condition. I am worried about continuing to use it in this condition, so I have ordered a special order for a slightly longer wire. It's a hassle! I would like the position to be a little more like a rider's position for city driving. It is now as easy to ride as a CBR600RR. View detail
Anyway, it's beautiful.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance, and the handlebar was a Sansei RACING Endurance Spec. The handlebar had a Sansei RACING's endurance spec. type separate handle that can be removed in a snap. The angle of hanging is more than 10 degrees. The bar is far from the other side of the Fork. I tried to roam around the neighborhood once, but I couldn't ride it, so I bought this product.
I was looking for a cool type with a bar growing right next to the fork and a hanging angle of 10° or less, and found SUPER NOW's Racing Handlebar Type A to be EXACTLY what I was looking for.
Was the one you received as per Image?
I have purchased SUPER NOW products in the past. I know the quality is good and I received a beautiful Handlebar as per Image.
How was your experience with it?
Positioning has become much easier. Since I usually only work on off-road vehicles, I thought that replacing the handlebar on the separate handle would be a gamble since I did not know if it would interfere with the handlebar or not, but I am very happy that it was successfully installed.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
There is nothing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grips are standard RossiGrip.
HONDA OEM Grip Left Side (https://www.webike.net/sd/23201784/)
HONDA OEM Grip Right Side (https://www.webike.net/sd/23201783/)
View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail