Reviews
Fits: HONDA BROS650, HONDA CB1100, HONDA CB1300SF, HONDA CB1300X4, HONDA CB400 FOUR, HONDA CB400F, HONDA CB400SF, HONDA CB400X, HONDA CB750, HONDA CBR1000F, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR250R, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400RR, HONDA CBR600F, HONDA CBR900RR, HONDA DREAM50, HONDA GROM
SP TAKEGAWA Adjustable Footpeg (for HONDA Vehicle)
quality are good but the design not good. The leg peg has a pin which located on top. when u fix the leg peg onto the socket. the leg peg is at aw ward positon. Unless the leg peg is round then it will solve the issued. most of the position as specify on the instruction manual does not allow the leg peg to be level. always at a angle. View detail
![Radial Brake Master Cylinder Kit [Vertical Φ19 Radial Pump Brake Master]](https://img.webike-cdn.net/catalogue/images/105373/79884_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Very Controllable
Used on SV650X.
Since the OEM has a horizontal 5/8, the fit is 19mm, so it was installed.
I wanted to use the OEM Brake hose, so I bit on the Offset adapter.
The Hose could be installed without any difficulty at all, and the difficulty level of the work was at the beginner's level.
Brake switch is also changed from OEMNisshin to Radial masterNisshin,
Installed without tampering anywhere.
Air bleeding, which I had heard was time-consuming, was completed in 3 minutes because of the Breeder on the MASTER side.
As far as the ride goes, I was quite torn between this and the 17mm before I bought it,
As a result, I have a slight regret that I should have gone with 17mm.
Everyone will have their own preferences, but the reason I want to put on Radial master is,
Because I want to control Brake by the amount of grip, not Breaking by force,
Stroke wants to take plenty.
At 19mm, it was tighter than I expected, and I would prefer to be able to grip it a little more.
However, it is still quite different from OEM horizontal placement.
It is very easy to bed in while leaving a small amount of front brake.
I will buy a 17mm one of these days and give it a try.
View detail
Fits: YAMAHA TRACER9 GT, YAMAHA FAZER8, HONDA VTR1000SP-1, HONDA CB400SF, HONDA CB400SB, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, SUZUKI BANDIT1250, KAWASAKI VULCAN S, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI SV1000 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI KATANA, SUZUKI GSX-S750
DAYTONA Hyper Sintered Pads
Used on a 2015 GSX-S1000.
We looked for a for ReplacementPad other than OEMPad and selected the same DAYTONA product used for Front.
I felt that the efficacy itself was not so different from the OEM, but Control is easier to use.
Rear brake feels just right for me as I am afraid it is too effective.
The evaluation of durability etc. is mixed expectations.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
Over 20 years of use
We have been using it for over 20 years and have never had a Trouble.
There is an Overhaul opportunity for Engine,
I also had the person who asked me to do the work check the Cylinder,
There were no abnormalities at all.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
It feels good to change it.
It is compatible with OEM, so there is no problem at all in use and installation.
It is not expensive, so we replace it with each Oil change, although it does require the time and effort to remove the Filter.
It may be a little overprotective, but …….
However, it would be helpful to change it so I can feel good about my ride and get it at a reasonable price.
View detail
![[UmaRacing]Oil Breather Attachment A](https://img.webike-cdn.net/catalogue/images/78233/07070303_5f03678977f25_TS.jpg)
Fits: HONDA FORZA, YAMAHA Cygnus X, YAMAHA Tricity155, HONDA Rebel300, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA CB300R, HONDA CB150R, YAMAHA MAJESTYS, YAMAHA BirdCITY125125, YAMAHA AxisZ, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA XV125SVIRAGO, YAMAHA XT225YSP, YAMAHA XT225WE
One-touch detachable is convenient
It is standard practice to attach a Breather Hose 650mm 6mm Diameter to relieve pressure in the Crankcase,
It is common for the Hose and Breather cap to be directly connected.
The heat from the engine may harden the hose and cause the hose to come off the cap.
When replacing the oil, you can remove it with a push switch, which is convenient for the Large change.
However, the Push Switch will not come off if you press it too hard!
Press all the way down and back up a little to release it.
Sealing of the detachable part is not a problem.
View detail
Fits: HONDA Hornet 900, HONDA Hornet 250, HONDA Hornet 600S, HONDA Hornet 600, HONDA Bross 650, HONDA Bross 650, HONDA Bross 400, HONDA Bross 400, HONDA Dream 50, HONDA Zervis., HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000SP, HONDA VTR1000F Firestorm, HONDA VFR800, HONDA VFR400R, HONDA STX1300, HONDA ST1100 Pan-European
Same shape as OEMfootpegIt is easy to install.
OEM same etc. so installation is not a problem.
Shaft is a little longer than OEM.
The OEM is using split pins to prevent Shaft loss.
Purchased goods will be fixed by CGrip.
Is the shaft longer for easier CGrip installation?
I interpreted this as.
The quartz had a little BALI, but it was easily removed.
We also considered an aluminum footpeg, but decided to go with the OEM type because of the pain in the soles of the thin soles of the Sole.
The feel is the same as the OEM.
I am fully satisfied considering the price.
I would recommend it to anyone considering footpeg replacement.
View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Touch is good, durability is good.
It was easy to control with braking power, so Repeat.
Last Life was good for 20,000km (assuming 5mm when new @ 4000km/mm).
However, the last 2mm of the remaining groove disappeared after 4000km and I was late to notice the remaining groove Zero (I cried), so I don't know if it is a characteristic of this pad or I simply neglected to inspect it, but I may need to be careful when the remaining groove decreases?
View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
It is over the price
I have installed this on a 2008 ABSMODEL CB400SB. The reason why I decided to install it on my CB400SB is that the OEM Master Cylinder is 15 years old this year and I thought it was time to change the overhaul to Semi-radial. This year's CB has a double disk, but since it is a single-press 3-pot, the time lag after the OEM lever is held is far from my ideal brake with a large time lag. I think it is a shame that the CB is equipped with a single-press caliper, because it eliminates the good qualities of the CB. (As I thought, the single push Caliper was still improved to opposing 4 pots when the Model was changed). I have changed various pads to improve the time lag and changed the brake fluid to BF4 from WAKOS to improve the time lag a little, but it is a characteristic of Caliper. But after I installed Nisshin's Semi-radial master, the time lag is gone and I am very satisfied with it. To be honest, I thought that Semi-radial would not be much different from OEM, but it is not at all. With the OEM master, I felt the front fork suddenly start to lag after I hold the lever, and then I felt the front fork start to lag suddenly! The Lever touch is much stiffer than the OEM. The price is not too expensive, and I am satisfied with the Large brakes because I have no more complaints about the Brakes over the years.
Here is the installation review
First of all, the brake switch will not be long enough, so wiring will be required. I also expected this, but if you are using a custom lever, you will not be able to use it. (I remember that Nisshin only offered Lever in Silver color in this Semi-radial, but there may be a Black color as well.) I think this is one of the best features of this Master Cylinder. The air bleed was very easy to do, which is one of the good points of this Master Cylinder, and I think it will take less than 30 minutes if you follow the normal procedure. If you hold the lever at an angle to the body of the car, the air in the Master Cylinder can be easily released.
I personally felt it was one more Review.
The convex part that holds the banjo bolt faces almost directly down, so the direction of the hose is limited to either directly above or directly below the bolt. In my case, because I have an ABSMODEL, it is impossible to use an external Hose, and since the angle of the banjo bolt cannot be changed, I ended up with a mounting position that puts a lot of load on the Hose, either directly above or directly below the bolt. The Hose is not designed to be installed directly above or directly below the Torque wrench, so the Hose would have to be installed directly below the Torque wrench. If the convex to hold the Hose had come out from the side, there would have been no burden on the Hose, so it would have been better to have the convex on the side like the OEM. (I plan to consult a Motorcycle shop at that time as the Brake hose is old and I plan to change it.) If you have a mesh hose and can change the direction of the banjo, I think you should prepare a diagonal banjo so that you can work smoothly. I had to re-grease the moving parts of the lever because they looked dirty. I thought I could see the Fluid if I changed the direction, but I didn't because it would have put a load on the hose. I have a water temperature gauge next to the inner cowl, but it is very difficult to see the tank. I used M10×1.25 bolt from Swage line.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CB500F, HONDA CB500X, HONDA CBR1000RR, HONDA CBR125R, HONDA CBR250R (2011-), HONDA CBR400R (2013-), HONDA CBR400RR, HONDA CBR500R, HONDA CBR600, HONDA CBR600F, HONDA CBR600RR, HONDA CT125 HUNTER CUB, HONDA NC700S, HONDA NC700X, HONDA RVF400, HONDA RVF750, HONDA VFR400R, HONDA VFR750F
This is my first purchase.
This is my first purchase, so I won't know until the next Oil change.
So I gave it 3 stars.
View detail
Fits: SUZUKI TL1000L, SUZUKI TL1000R, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI SV400, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-9R, SUZUKI GSX-R1000, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-9R
It's light!
It's so lightweight and the design is cool!
It does not have the flexibility of the OEM's moving parts, and the Mirror position must be fixed with Bolt, although it is thin and adjustable. That is the only thing that should be different for different likes and dislikes.
I would also like to see more attention paid to the quality of the details. For example, the chamfering may be a little rough because it is carbon, but I wish the Bolt had been made black and rust-proofed spec. so that the color could be unified.
Once you do it, you will know it, but I would like to see it mentioned in the installation, as there is a HANG in the assembly sequence.
Overall, I'm happy with it
View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
have an excellent effect on
I replaced the OEM Brake Pads with GoldenPads because the OEM Brake Pads were not good enough to lock when I stepped on them.
After the replacement, the brake is now working just by stepping on the brake and I can stop quickly at traffic lights.
However, I had a scary experience on Downhill pass when I stepped on Brake with Habit as before and it started to lock up, so I decided to return Brake Pads to OEM instead of fixing Habit.
It is a Recommendation to those who can fix Habit because it is a good Brake Pads.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
Project Agro
Bought this, along with the clutch master cylinder as an upgrade on the stock items. Simple to fit and easy to bleed due to the top mounted bleed nipple. Great price from Webike, as cheap as some breakers are asking for second hand parts. If you want to upgrade your braking system you could do far worse than a RSC master cylinder. Recomended. View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
zx25r Satisfied with city driving
I am touring sometimes in town and it works great!
It is totally different from NORMAL!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-R1100, SUZUKI GSF1200, SUZUKI GSX-R1100, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300R HAYABUSA, SUZUKI B-KING, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, YAMAHA YZF-R25, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400
DAYTONAMotorcycle Cover
It was weak in the rain and ripped right off ?Surprise! View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
Nice touch!
It is installed on an XJR1300C.
Caliper is NORMAL Sumitomo MOSCaliper, Brake hose is Stainless Mesh.
The brembo designation is 19Φ, so I have set it to 19RCS, but to be honest, 19Φ might be Large tight for MOSCaliper.
Especially if you include Mesh hose, it makes for a very gruff Brake.
Once you get used to it, it does not bother you at all, but if you want more controllability, 17RCS is recommended.
The brembo person also said that One sizeDown is not a problem.
If you plan to change Caliper to brembo 40mm, buy 19 because brembo designation is 19Φ.
For those who make RADIAL CALIPER, beware of Caliper's Piston system.
The 30mm same diameter 4PODDouble caliper is the recommended Size17Φ.
For 30/32 odd shapes and 32 same diameter, 19Φ is the recommended size, so check Caliper's Piston size.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D
For spare parts
I replaced it with a new one at Stem Overhaul, so I am purchasing it for Stock, next time for Replacement.
I don't think I will have to replace it with a new one for a while, but since the price is not that high, I thought it would be a good idea to have a spare.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CB500F, HONDA CB500X, HONDA CBR1000RR, HONDA CBR125R, HONDA CBR250R (2011-), HONDA CBR400R (2013-), HONDA CBR400RR, HONDA CBR500R, HONDA CBR600, HONDA CBR600F, HONDA CBR600RR, HONDA CT125 HUNTER CUB, HONDA NC700S, HONDA NC700X, HONDA RVF400, HONDA RVF750, HONDA VFR400R, HONDA VFR750F
With magnet, it stands out and makes it easier to maintain.
I replaced the oil with gold dust because it is an old car body, but there is no oil filter in this car model, so I hoped that I could at least catch the gold dust with the magnet on the drain bolt.
The color is Blue to match the car body color. It is a very Beauty and prominent color, which is good because it makes it easier to find this Bolt at the bottom of the car body, where it is hard to see. It is good because there are other Bolts right next to it.
This body will not be ridden much distance, so next Oil replacement (1000km) will probably be replaced in a year before I drive any distance, but I'm looking forward to seeing how much Gold genus powder is removed at that time. (I forgot to take a picture, but there was quite a bit of Gold Genus powder that had settled on the pure Black Oil after the replacement.)
For your information, the specification of OEMBolt is M12×15mm P1.5 BoltHead hexagonal 17mm, and this product differs only in BoltHead dimension, which is hexagonal 14mm.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D
Replace with new one
The seal was replaced with a new one along with maintenance and bearing replacement of the stem.
The price is not that much, and it is sold by HondaOEM Product, which was helpful.
View detail
Fits: HONDA CB400 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CBR600RR, HONDA VTR1000SP1, HONDA CBR1000RR, HONDA VTR1000F, HONDA VTR1000SP2, HONDA CBR954RR, HONDA CBR900RR (929), HONDA CBR900RR, HONDA CBR600F4, HONDA CBR600F4i, HONDA CBR600FS, HONDA RVF NC35, HONDA NSR250R, HONDA RVF, KAWASAKI ZX-10R, KAWASAKI ZX-9R, KAWASAKI ZX-6RR, KAWASAKI ZX-7R
Light and Cool!
Switching from Napoleon OnMirror
I had to wait about 3 months after ordering, but it is good because it is Carbon and cool!
The only thing is that the edges on the Mirror side are crumbly and I wish they would pay more attention to detail….
Also, the angle of the Mirror Bracket cannot be changed after installation.
View detail