Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
To match the Gold amount up to free shipping.
As per Title, I bought it to get free shipping.
We strictly follow the routine of one in every two Oil changes, so this is fine.
This one also has an O-ring attached, which is convenient.
There were two types of large O-rings in the package. I used the one with the smaller diameter wire, but I think it is fine.
Is it because of these two types of O-rings that I feel like there are so many compatible car models listed?
A certain "Kansai Soul", which is only cheap, is poorly made, but I think this one can be used with peace of mind.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
I wonder if the hardness will engulf the sand.
Since it is thick and not flexible, sand etc. will be caught by the wind from under the Seat and will dance inside the Seat when it is near a field, etc. It prevents rain, but when the wind blows, rain will naturally enter from underneath and dance inside the thick Covers. It prevents rain, but when the wind blows, rain naturally enters from below and dances inside the thick cover, making it quite damp. When the sun shines, it is necessary to remove the Seat to dry the Motorcycle. I wish I could use several of them. View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Recommendation can be made to all Yuetc. Motorcycle Cover
First of all, this Motorcycle Cover "buy" It is! Attraction Point1 A good looking, unique camouflage pattern." Attractiveness Point2 The Key for Hole's 40mm Eyelet. (Large and convenient) Attractiveness Point3 Red LoopTape on Front section. (It's very useful!) It doesn't have great rainproof performance, but it's affordable, easy to use, and the camouflage pattern is cool! It is very useful in the parking lot of the apartment because I can easily recognize my motorcycle with the camouflage pattern! View detail
Element is always this!
Required Packing on OEM Equivalent Product (excluding Drain Washer) It is easy to use because everything is included in the package. View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Genuine Yamaha Circlip for FZ6R 2014
As with when ever I change out bearings regardless of where, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the perimeters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part and that was the finish of the main bearing in the transmission replacement. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Too bad …
Unfortunately, the hole diameter is not suitable for the 91 SR. If you are considering purchasing the Short Stand, you do not need to purchase it, as it can be attached to the original Spring without it. View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
No particular complaints.
Goods that are consumable and sufficient without the need to buy expensive ones. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Motorcycle Cover After 3 months of use.
[How is it used?
Used in a parking lot with a carport. Where rain does not hit directly.
Was the one you received as per Image?
Camouflage pattern, as per Image. I prefer this area.
Was the installation difficult?
The size is a little large.
I'm satisfied with it because it just covers me completely.
How was your experience with it?
Use it for 3 months.
(1) Camouflage patterns can be quite recommendation in terms of security since they blend in at night.
A color that can recommendation in terms of security. This was a pleasant miscalculation.
I don't know about the durability of the PelePera fabric, but if it is not exposed to direct rain and can be stored indoors, it seems to be reasonably durable.
At any rate, I've been using it for 3 months with no problems at all. I just think it would not be suitable for places with Blue empty parking. Especially the fabric is so thin that I think the Cover will tear in windy areas.
[Included Parts:were they on?
[Was there anything that disappointed you?
My concern is the Buckle, if it breaks I won't be able to tie the Motorcycle down and it will probably crack over time after a few years. I'll see how it goes.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
At Caliper's Overhaul.
I replaced the pad at CaliperOverhaul for about half the price. View detail
Texture good, looks much better Parenthesis.
[How is it used?
Introduced to Rear of MainMotorcycle's XJR1300C. The year is 2015.
At the same time, Front also introduced Serie-OROSeries Brake Discs.
Item number:78B40830. Of course I bought it at the same time as it is listed on webike.
Since there has been no lineup of for RearBrake Disc from brembo until now, it is now possible to install brembodiscs in the front and rear!
For those who have already installed brembo's SUPER SPORTS750Series or Serie-OROSeries on the front, we recommend brembo for the rear as well.
Was the one you received as per Image?
The disc arrived exactly as shown in the product picture, it is a Stylish Design and looks very much better than the OEM.
It is marked with brembo's bMark and made in Italy's Laser marking.
The material of the disc also seems to be the same stainless steel steel used for the SUPER SPORTS750Series without any compromise.
SUPER SPORTS750Series is used in ST600 and 1000 of FOR JAPAN MODELRoad race, so it has enough specifications.
Was the installation difficult?
If you can remove the rear wheel, there is nothing difficult.
When removing the disc bolt, it is recommended to use a heat gun to ensure smooth removal.
It is also recommended to clean the screw holes with Tap.
Please be sure to use Screw Lock for installation.
How was your experience with it?
It is difficult to perceive the change since it is the same size and thickness as OEM, but the appearance will be quite Parenthesis better as shown in the picture (lol).
I think it would be a good idea to replace the OEMdiscs with these brembodiscs when they are worn out.
The price is low and the cosmetics are very good.
If you are replacing the disc, you should also replace the Brake Pads with new ones, but this time you did not.
Rear pads are also brembo products, item number:07YA40SP
This Pad is also recommended as it is quite Controllable.
You can find the part number on webike. Please refer to the imprementation as well.
The original performance will not be exhibited unless the fish is firmly attached to the target, so please make sure that the fish is firmly attached to the target before breaking it in earnest.
[Included Parts:were they on?
Included Parts:were not available.
[Was there anything that disappointed you?
Not at all! Not disappointing, but looks lighter than OEM in design! I thought it would be, but the weight was almost the same (lol).
View detail
Fits: DUCATI 848, YAMAHA FZ400R, YAMAHA XT660X, YAMAHA XJR1300, YAMAHA V-MAX 1680, YAMAHA SRX600, YAMAHA SRX400, YAMAHA FZR250, YAMAHA FZR750, YAMAHA FZ750, YAMAHA FZ400, YAMAHA FJ1200, MV AGUSTA BRUTALE R989, KTM 640LC4 DUKE, DUCATI MONSTER 1200S, DUCATI 748R, BMW G650 XMOTO, BMW F800ST, BMW F800S, BMW F800R
Control is the best!
Control leaves are excellent due to the stiffness from the thick back plate, good firing, and good material.
It doesn't bother me because I use it on the circuit, but on the street it squeals until it heats up.
The thickness of the friction material itself is not Large, so I think the durability is fairly normal.
View detail